• +91-85699-09696

CNC Semi Production Mill Manufacturer,Supplier and Exporter in India

CNC Semi Production Mill

Product Code : EL-CTM-9043
Jlab Export is a leading CNC Semi Production Mill Manufacturer,and suppliers in India

This semi production mill is built for institutes that teach on industrial controls. It has servo-driven axes on LM guideways, a 3 HP spindle running from 100 to 4000 rpm and an automatic changer for 8 or 12 tools. It travels 300 mm in X, 225 mm in Y and 250 mm in Z. The machine keeps the safety features of a trainer.

Specifications

Axis travel (X / Y / Z)300 / 225 / 250 mm
Spindle to column270 mm
Table560 x 220 mm, T-slots 3 x 10 x 50, load up to 120 kg
Spindle3 HP, 100–4000 rpm
Axis drivesServo motors with servo drives, LM guideways
Feed rate / rapid travel0–10,000 mm/min / 10,000 mm/min
Positioning / repeatability / resolution0.010 mm / ±0.005 mm / 0.001 mm
Tool changerAutomatic, 8 or 12 tools, tools up to 40 mm long and 16 mm diameter
VicePneumatic or manual
Overall size1300 x 1100 x 1900 mm
Minimum order quantity1 unit
Dispatch timeUsually 14–18 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Practicals on the Semi Production Mill

Students can program a bracket with a slot, a pocket and a drilled hole pattern inside the 300 x 225 mm working area. They prove the program in simulation, touch off the work offset on the blank and set a length offset for each tool in the changer. A short batch of the same bracket then shows how closely the machine repeats.

For a cutting-force practical, the Milling Tool Dynamometer dynamometer is clamped on the table and the class records the forces at different depths of cut, speeds and feeds. Finished brackets are checked with a Dial Caliper and a Dial Gauge. If the pneumatic vice is chosen, it runs from a shop supply such as an Air Compressor.

Frequently Asked Questions

What do the positioning, repeatability and resolution figures mean?
Resolution, 0.001 mm, is the smallest step the control can command. The 0.010 mm positioning figure limits how far an axis may stop from a programmed point. The ±0.005 mm repeatability is the scatter on repeated moves to one point, which is what holds a batch of brackets to size.

Why does this mill use servo motors rather than steppers?
Servo motors work with feedback from the drive, so the control corrects position while the axis moves and under cutting load. Stepper drives on many trainer mills run without that feedback. Servo drives also suit the fast rapid travel of 10,000 mm/min on this machine.

How large a job can the table take?
The table is 560 x 220 mm with three T-slots and carries up to 120 kg. Axis travels are 300, 225 and 250 mm in X, Y and Z, and the spindle sits 270 mm from the column.

Which tools fit the automatic tool changer?
The changer holds 8 or 12 tools, depending on the version chosen. Each tool can be up to 40 mm long and 16 mm in diameter, which covers the small end mills and drills used on training parts.

Should we choose the pneumatic or the manual vice?
A manual vice is tightened by hand with its handle. A pneumatic vice clamps on compressed air at the touch of a valve, which saves time on batch work but needs an air supply near the machine.

Other CNC Mills and Lathes

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 6 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us