• +91-85699-09696

CNC Milling Machine Manufacturer,Supplier and Exporter in India

CNC Milling Machine

Product Code : EL-CTM-9073
Jlab Export is a leading CNC Milling Machine Manufacturer,and suppliers in India

Aimed at mould and die work, this CNC milling machine has a built-in spindle that reaches 24000 rpm and a 20-tool automatic changer. Its axes move 900 mm in X, 600 mm in Y and 500 mm in Z. High spindle speed and cutting feeds up to 20,000 mm/min suit the small cutters and fine finishing passes used on cavities and cores.

Specifications

Axis travel (X / Y / Z)900 / 600 / 500 mm
SpindleBuilt-in, 24000 rpm
Cutting feed rate1–20,000 mm/min
Automatic tool changer20 tools
OperationsMilling, cutting and drilling
Typical workMoulds and dies, high-speed cutting
Minimum order quantity1 unit
Dispatch timeUsually 14–18 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Workshop Practice in Mould Milling

A mould exercise usually starts in CAM software. Students model a small cavity, rough it out with a larger end mill and then finish the surfaces with a small ball-nose cutter at high speed. The program is simulated before cutting, and each tool gets a length offset so the changer can swap them mid-program.

Drilling a bolt-hole pattern with a canned drilling cycle shows how a single cycle call drills every hole in a list. Step depths are checked with a Vernier Height Gauge on a surface plate, and a Dial Gauge shows how flat the parting face of the mould is. For a cutting-force study, the Drilling Tool Dynamometer dynamometer measures thrust and torque while students vary speed and feed.

Frequently Asked Questions

How does step-over change the finish in a cavity?
Step-over is the sideways distance between neighbouring passes. A ball-nose cutter leaves a small ridge, or scallop, between passes, and a smaller step-over leaves lower ridges. The surface then needs less polishing, but the finishing pass takes longer. High spindle speed and fast feeds keep that extra time down.

Why does mould work need a 24000 rpm spindle?
Mould cavities are finished with small cutters, and a small cutter has to turn fast to reach a sensible cutting speed. At high spindle speed with light, fast passes, the surface comes out finer and needs less polishing afterwards.

How does this model differ from the other CNC Milling Machine?
This one has a built-in 24000 rpm spindle, a 20-tool automatic changer and long travels for mould work. The CNC Milling Machine on a casting base drives its three axes with stepper motors and comes with an arbor, end mills and a clamping kit.

How many tools can be loaded?
The automatic tool changer holds 20 tools. A mould job can carry roughing, semi-finishing and finishing cutters plus drills in one program without stopping to change tools by hand.

What feed rates can it cut at?
Cutting feed runs from 1 to 20,000 mm/min. The low end suits plunge and drilling moves, and the high end suits light finishing passes with small cutters at full spindle speed.

Other CNC Mills and Machining Centres

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 6 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us