• +91-85699-09696

CNC Milling Machine Floor Model Manufacturer,Supplier and Exporter in India

CNC Milling Machine Floor Model

Product Code : EL-CTM-9012
Jlab Export is a leading CNC Milling Machine Floor Model Manufacturer,and suppliers in India

This floor-standing CNC mill gives a training workshop a full-size three-axis machine for part programming and cutting practice. It has a 500 x 160 mm table with three 12 mm T-slots and travels 280, 120 and 270 mm on X, Y and Z. The 1 kW spindle runs from 100 to 5000 rpm and drills up to 16 mm.

Specifications

Worktable size500 x 160 mm
T-slots3, each 12 mm wide
Maximum table load35 kg
Travel (X / Y / Z)280 / 120 / 270 mm
Drilling capacity16 mm
Spindle1 kW motor, 100–5000 rpm
Axis motors (X / Y / Z)4 / 4 / 6 Nm
Axis speed500 mm/min feed, 2 m/min maximum
Positioning precision0.015 mm
Machine size (L x W x H)1280 x 895 x 1845 mm, 510 kg net
Minimum order quantity1 unit
Dispatch timeUsually 14–18 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Workshop Practice on the Floor Model

A first exercise is a short part program for a rectangular pocket and a row of holes. Students write it in G-code, with G00 for rapid moves, G01 for straight cuts and G02 or G03 for the corner arcs. They check the tool path in a simulator, then dry run it with the cutter well clear of the work.

Before cutting, the machine vice is squared to the X axis with a Dial Gauge on its magnetic base. Students then touch off the edges and top of the blank to set the work offset, and enter a length offset for each tool. The holes are drilled with bits from the HSS Universal Drill Bit Set, whose drills of up to 12 mm sit well inside the 16 mm capacity. Each finished part is measured with a Vernier Caliper, and any size error is corrected in the offsets before the next part.

How It Differs from the Table Model

The floor model stands on its own base and is built for bigger work and heavier cuts. Its table is longer and carries more weight, its Z travel is greater and its spindle motor has twice the power of the bench version. The table model is the lighter choice when space is short or the parts are small.

Frequently Asked Questions

How fast do the axes move?
Each axis feeds at up to 500 mm/min while cutting and moves at up to 2 m/min when positioning. In a program, G01 with an F value sets the cutting feed and G00 sends the axes at the rapid rate.

How large a part can the table take?
The table measures 500 x 160 mm and is rated for up to 35 kg. Features to be machined must lie within the 280 mm X, 120 mm Y and 270 mm Z travel, after allowing for the vice and the cutter.

What does the 0.015 mm positioning figure mean?
It is how closely the table reaches a commanded position. The size of a cut part also depends on cutter wear, deflection and the offsets entered, so students still measure every part and adjust the offsets when needed.

Why set a work offset before running a program?
The work offset tells the control where the part zero is on the table. Once it is stored, the same program runs on a blank clamped in a new position, after its edges and top have been touched off again.

Other CNC Mills and Milling Trainers

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 6 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us