• +91-85699-09696

CNC Lathe Machine Table Manufacturer,Supplier and Exporter in India

CNC Lathe Machine Table

Product Code : EL-CTM-9022
Jlab Export is a leading CNC Lathe Machine Table Manufacturer,and suppliers in India

At 565 mm high and 140 kg, this CNC lathe is made to stand on a workbench, so a turning class can run without a floor-mounted machine. The swing is 200 mm over the bed, or 100 mm where the work passes the carriage. A 4-station turret holds the tools, and the 500 W motor drives the spindle from 100 to 3000 rpm.

Specifications

Swing over bed / carriage200 / 100 mm
Distance between centres460 mm
Bed width100 mm
Travel (X / Z)150 / 250 mm
Spindle500 W main motor, 100–3000 rpm
Tool turret4 station, 360 degree indexing
Tailstock travel50 mm
Axis motors and speed1.35 Nm, 500 mm/min feed, 2 m/min maximum
Precision (position / repeat / turret)0.015 / 0.01 / 0.005 mm
Machine size (L x W x H)1000 x 780 x 565 mm, 140 kg net
Minimum order quantity1 unit
Dispatch timeUsually 14–18 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Turning Practicals at the Bench

Teachers often begin with facing and plain turning, then add a taper, a groove and an end radius as the class gains confidence. Each program is written in G-code, previewed in simulation and dry run before the turret comes near the bar. The small machine lets a group gather round while the teacher explains each block.

Setting the four tool offsets is the next lesson. Each tool is touched on the faced end to set Z. It is then touched on a turned diameter, read with an External Micrometer, to set X. When the part is finished, students measure the step lengths with a Vernier Caliper. They then inspect the radius and chamfer on a Universal Profile Projector.

Frequently Asked Questions

Can the table lathe sit on an ordinary workbench?
It measures 1000 x 780 x 565 mm and weighs 140 kg net. The bench or stand under it must be level and strong enough for that weight, with space in front for the operator and the class.

Why does a long turned diameter come out tapered?
Measure the diameter at both ends. If the end away from the chuck is larger, the work is bending away from the tool or the tailstock is out of line. A sharp tool and a light finishing pass reduce the bending. A steady taper on every part points to tailstock or machine alignment.

How long can a turned feature be?
The Z axis travels 250 mm, which sets the longest cut in one setting. For slender work, the tailstock centre supports the free end so the bar does not bend away from the tool.

How does it compare with the floor model lathe?
This table version has less swing, shorter axis travel and half the motor power of the floor model, and it weighs about a third as much. It shares the four-station turret, the 100 to 3000 rpm spindle range and the same feed rates.

What does turret return orientation precision mean?
It is how closely the turret comes back to the same position each time it indexes, here 0.005 mm. A turret that repeats well keeps each tool on the same line, so the tool offsets stay valid after every tool change.

Other CNC Lathes for Training

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 6 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us