CNC Lathe Trainer Stepper Manufacturer,Supplier and Exporter in India
Product Code : EL-CTM-9038
Jlab Export is a leading CNC Lathe Trainer Stepper Manufacturer,and suppliers in India
Stepper motors and stepper drives move the X and Z axes of this CNC lathe trainer. Its 2 HP AC servo spindle motor runs on a VFD from 100 to 4000 rpm. Work up to 40 mm in diameter and 250 mm long can be turned, and control is PLC-based. It can also be linked into a flexible manufacturing system.
Specifications
| Bed type | Flat or 45 degree slant |
| Turning capacity | 40 mm diameter, 250 mm length |
| Swing over bed / cross slide | 200 / 60 mm |
| Centre height / between centres | 100 / 320 mm |
| Chuck | 100 mm, hydraulic or manual |
| Spindle | 2 HP AC servo motor, 100–4000 rpm with VFD, A2-3 / MT 3 nose |
| Axes | Stepper motors with stepper drives, 25 x 5 mm C3 class ball screws, X 100 mm, Z 300 mm |
| Feed rate / rapid travel | 0–1200 mm/min / 1200 mm/min |
| Turret | Automatic, 4 or 8 stations, 12 x 12 mm tools |
| Positioning / repeatability / resolution | 0.010 mm / ±0.015 mm / 0.010 mm |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Lab Exercises on the Stepper Lathe Trainer
A first practical is a turned pin with a chamfer, a taper and a radius. Students write the program with G01 and G02 or G03 moves, run it in simulation, then dry run it on the trainer before the first cut. Because it runs on a 230 V single-phase supply, the trainer can be set up in a lab without three-phase power.
Tool offsets for the turret stations are set by touching each tool on a faced end and on a turned diameter. Finished diameters are measured with the External Micrometer, and spindle run-out is checked with the Dial Gauge. Later in the course, the trainer can work as one station of a Flexible Manufacturing System, where machines, a robot and storage run under one controller.
Control, Tailstock and Coolant
The control system is PLC-based and comes with an emulated or standard keyboard. Lubrication and coolant are automatic. The tailstock base has a 170 mm stroke with hydraulic or manual actuation. An optional C axis with brake lets the spindle be held at a set angle instead of only rotating.
Frequently Asked Questions
What is the difference between stepper and servo drives here?
The X and Z axes use stepper motors with stepper drives, while the spindle uses an AC servo motor. Stepper axes are simple to set up and explain in class, and servo drives with feedback are common on production machines.
Should I choose the flat bed or the 45 degree slant bed?
Both are offered. A slant bed lets chips fall away from the cutting area and gives easier reach to the chuck. A flat bed is closer to the conventional lathes that many students already know.
What does FMS compatibility mean?
The trainer can be connected into a flexible manufacturing system, where machines, a robot and storage work together. Students first learn the lathe on its own and later run it as one station in an automated cell.
What power supply and space does it need?
It runs on 230 V single phase. The machine measures 1480 x 800 x 1200 mm, so plan floor space for it and for students to stand clear of the working area.
Can it take a 4-station or an 8-station turret?
The automatic turret is offered with 4 or 8 stations and holds 12 x 12 mm tools. Eight stations let a full set of turning, grooving and parting tools stay loaded for longer programs.
Other Turning Trainers and Automation
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
