CNC Lathe Controller Manufacturer,Supplier and Exporter in India
Product Code : EL-CTM-9031
Jlab Export is a leading CNC Lathe Controller Manufacturer,and suppliers in India
A lathe control and a machine operator panel share one box in this unit, with the push buttons, selector switches and manual pulse generator already fitted. It controls 2.5 axes and gives a 0–10 V analog spindle output. It reads one spindle encoder and drives the axes with clock and direction signals from a 24 V DC supply.
Specifications
| Axes | 2.5 axes |
| Interpolation | 2 axis, linear and circular |
| Control output | Clock and direction |
| Resolution | Full, half, quarter or one-eighth step |
| Spindle speed control | 0–10 V analog output |
| Spindle encoder feedback | 1 axis |
| Digital inputs / outputs | 16 / 16 |
| Programming | Standard G and M code |
| Power supply | 24 V DC |
| Terminations | D-sub connectors and FRC headers |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Lab Exercises with the Lathe Controller
In a mechatronics or CNC lab, the controller lets students build a working lathe control system on the bench. They connect the clock and direction outputs to two stepper drives, choose the step resolution and jog each axis with the pulse generator. A Digital Storage Oscilloscope Dual Channel shows the clock pulses on one channel and the direction line on the other as an axis reverses.
The spindle output makes a second exercise. Students command several spindle speeds in a program, read the 0–10 V signal with a Digital Multimeter and plot voltage against the speed asked for. Teachers can then explain why a lathe control reads a spindle encoder. Feed per revolution and thread cutting both depend on knowing where the spindle is.
Frequently Asked Questions
What does 2.5 axes mean on a lathe controller?
Two axes, X and Z on a lathe, move together in linear and circular interpolation. The half axis is an extra axis that can be positioned on its own but does not join the interpolated moves.
What does the step resolution setting change?
It sets how far the motor turns for each clock pulse: a full, half, quarter or one-eighth step. Finer settings give smaller, smoother moves but need a higher pulse rate for the same axis speed.
Which axis drives can it run?
Any drive that takes clock and direction inputs, which covers most stepper drives and many servo drives. Check the drive’s input signal levels before wiring it to the D-sub connectors.
How is spindle speed controlled?
The 0–10 V analog output is wired to the speed input of an inverter or spindle drive. A program sets the speed with an S word, and the output voltage rises with the commanded speed.
What can the 16 inputs and 16 outputs be used for?
Inputs usually take limit switches, an emergency stop and door switches. Outputs switch items such as coolant, a turret or a chuck, wired through the D-sub connectors and FRC headers.
Other CNC Controllers and Drive Trainers
- CNC Milling Controller
- Stepper Motor Controller Trainer
- AC Servo Speed Torque Characteristic Trainer
- CNC Lathe Machine Table
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
