Stepper Motor Controller Trainer Manufacturer,Supplier and Exporter in India
Product Code : EL-DSO-10345
Jlab Export is a leading Stepper Motor Controller Trainer Manufacturer,and suppliers in India
Stepper Motor Controller Trainer (code EL-DSO-10345) is a bench trainer for controlling the speed of a stepper motor in two ways: manually, through digital logic circuits, ICs and a transistor stage, and under program control from its own 8-bit microprocessor. Its circuit diagram is printed on the glass epoxy front panel, where the important ICs and test points are brought out. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Experiments | Speed control of the stepper motor using a digital control circuit; speed control of the stepper motor using a microprocessor |
| Motor | Stepper motor |
| Signal processing | Signal processing circuit |
| Manual control mode | Digital logic circuits and ICs; transistor |
| Microprocessor control mode — CPU | 8-bit microprocessor |
| Memory | Total on-board capacity of 64K bytes |
| RAM | 8K/32K bytes, with space for further expansion |
| ROM | 8K bytes of EPROM, loaded with a program |
| Timer | 16-bit programmable timer/counter |
| I/O | 24 I/O lines using 8255 |
| Keyboard | 10 command keys, 16 hexadecimal entry keys, 1 vector interrupt key and 1 reset key |
| LED display | 6 seven-segment displays (4 for the address field, 2 for the data field) |
| Bus | All data, address and control signals |
| Power supply | In-built fixed DC regulated supply: +12 V / 2 A and +5 V / 2 A |
| Front panel | Glass epoxy PCB, 400 mm x 225 mm, mounted on a lightweight shock-proof plastic cabinet; circuit diagram printed on the PCB; all important ICs and test points brought out on the front panel |
| Power requirement | 220 V AC +10%, 50 Hz |
| Weight | 1.0 kg approx. |
| Dimensions | 430 (L) x 230 (B) x 90 (H) mm |
| Standard accessories | Power cord, patch cords and instruction manual |
| Quality check | Each trainer is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-DSO-10345 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with the SAA-1027 Stepper Motor Board?
| Trainer | Control | DC supply | Mains |
|---|---|---|---|
| This trainer (EL-DSO-10345) | Manual mode with digital logic ICs and transistor; microprocessor mode with on-board 8-bit CPU | +12 V / 2 A and +5 V / 2 A regulated | 220 V AC +10%, 50 Hz |
| Stepper Motor Control Using IC SAA-1027 | Driver IC SAA-1027 with LM 555 timer IC; fast/slow, forward/reverse and free-run/step switches; can be interfaced with a microprocessor trainer or PC | IC-regulated 12 V DC at 500 mA | 230 V ±10%, 50 Hz |
Choose this trainer when you want manual logic control and an on-board 8-bit microprocessor in one unit. The SAA-1027 board is built around a dedicated stepper driver IC and is designed to be interfaced with a microprocessor trainer or a PC.
What Is the Stepper Motor Controller Trainer Used For?
A stepper motor turns in fixed angular steps, one for each pulse applied to its windings in sequence, so the pulse rate sets its speed and the pulse count sets how far it turns. That is why steppers drive printers, plotters and small CNC axes without a position sensor. This trainer teaches both ways of producing the step sequence — a hard-wired digital logic controller and a programmed microprocessor controller — linking digital electronics with microprocessor interfacing in electrical, electronics and instrumentation engineering labs.
What to Specify When Ordering
- Number of trainers for the lab.
- Companion boards — the SAA-1027 stepper board and the Microprocessor Trainer are separate items that can go on the same enquiry.
- Mains supply — the trainer is built for 220 V AC, 50 Hz.
Frequently Asked Questions
Can programs be keyed in on the trainer itself?
Yes. The microprocessor section has its own keyboard with 16 hexadecimal entry keys and 10 command keys, plus six seven-segment LED displays — four for the address and two for the data.
What memory does the microprocessor section have?
The board has a total on-board capacity of 64K bytes, with 8K/32K bytes of RAM and room for expansion, and 8K bytes of EPROM.
What is supplied with the trainer?
A power cord, patch cords and an instruction manual are the standard accessories.
How large and heavy is it?
The cabinet measures 430 x 230 x 90 mm and the trainer weighs about 1.0 kg.
What should an export quotation request include?
State the number of trainers, the destination country and port or city, the delivery terms you need (for example FOB or CIF), any packing or labelling instructions and the tender reference where one applies.
Who manufactures the trainer?
It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, Haryana, India, which quotes for it as the manufacturer.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a manufacturer of electronics trainers and electronic lab instruments in India, incorporated in 2017 and located on Hargolal Road, Ambala, Haryana. The stepper motor trainer comes from JLab’s own works rather than a trading house, so colleges, polytechnics, dealers and importers buy direct from the maker, every unit is inspected visually before it leaves, and later orders are handled by the same team. JLab exports worldwide and ships to buyers in every region — for example Panama in Central America and the Caribbean, Ukraine in Eastern Europe, Belgium in Western Europe, Afghanistan in South Asia and Ivory Coast in West Africa. For tenders, see the JLab lab tenders page.
Related Motor Control and Microprocessor Trainers
- Stepper Motor Control Using IC SAA-1027 — the driver-IC stepper board in the comparison above.
- Microprocessor Trainer — a separate microprocessor trainer kit offered with a 16-bit or 8-bit CPU and an EPROM programmer interface.
- DC Position Servo Mechanism Trainer — position control with a DC servo motor and potentiometer error detector.
- AC Servo Speed Torque Characteristic Trainer — speed–torque tests on a 2-phase AC servo motor.
The SAA-1027 board is listed in the Power Electronics Trainers range; browse the wider Electronics Lab Equipments section for more trainers.
Request a Quote
Start an enquiry with the Add To Cart button, or write to JLab through the contact page with the number of trainers, any companion boards and the delivery city and country.
Last updated: 22 October 2026
