• +91-85699-09696

CNC Training Mill, VMC with LM Guideways Manufacturer,Supplier and Exporter in India

CNC Training Mill, VMC with LM Guideways

Product Code : EL-CTM-9041
Jlab Export is a leading CNC Training Mill, VMC with LM Guideways Manufacturer,and suppliers in India

Production-style milling on this vertical machining centre runs on AC digital drives for the spindle and all three axes, with linear motion guideways on X, Y and Z. The spindle reaches 8,000 rpm and a double gripper changer serves a 20-tool magazine. Lubrication is centralised and programmable, and the electrical panel is air-conditioned.

Technical Details

Machine typeVertical machining centre (VMC) with box-structured base and column
Spindle8,000 rpm, AC digital spindle drive
Axis drivesAC digital servo drive on X, Y and Z
GuidewaysLinear motion guideways on all three axes
Tool changerAutomatic, double gripper, 20-tool magazine
Chips and coolantSide chip conveyor with built-in external coolant system
Through-spindle coolantOption, quoted separately from the external coolant system
LubricationCentralised and programmable
Electrical panelAir-conditioned, keeping the electronics at controlled temperature and humidity and free of dust
OptionsProgrammable 4th axis with tailstock, HSK spindle, high-pressure coolant, auto door, chip conveyor, choice of CNC control, 3D software, tooled-up machine
Minimum order quantity1 unit
Dispatch timeUsually 14–18 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Workshop Exercises for CNC Students

Contour milling suits this machine well. Students draw a cam or gear-blank profile and write the program with G02 and G03 arcs. They switch on cutter radius compensation, so the control offsets the path by the cutter radius. After a dry run in simulation they cut the profile and measure it with a Dial Caliper.

With the 4th axis option fitted, a class can index a round bar and mill hex flats, then check the size across flats with an External Micrometer. Step heights on finished parts are measured from a surface plate with a Vernier Height Gauge. Running the same part on a conventional Universal Milling Machine shows students what CNC control changes.

Frequently Asked Questions

What is an HSK spindle and why choose it?
HSK is a hollow taper tool interface. The holder seats on a short taper and on its flange face at the same time, so the tool stays stiff and centred at high spindle speed. It is offered as an option on this machine.

Why are linear motion guideways used on all three axes?
Linear motion guideways run on rolling elements instead of sliding surfaces. Friction is low, so the axes can traverse fast and stop on position without stick-slip, and wear is slow. This machine has them on X, Y and Z.

What does the programmable lubrication system do?
It pumps oil to the guideways and other moving parts at intervals set in the control. Operators do not have to oil the slides by hand, and no part is left dry during a long run.

Can we choose the CNC control and 3D software?
Yes. The machine can be supplied with a CNC control system of the buyer’s choice, and 3D software is available as an option. Programs are still written in G-code and M-code whichever control is fitted.

When is a tailstock needed on the 4th axis?
A tailstock supports the free end of long work held on the 4th axis, so the bar does not bend or chatter under the cutter. It is offered together with the programmable 4th axis option.

Machining Centres and CNC Mills to Compare

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 20 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us