• +91-85699-09696

CNC Training Lathe Manufacturer,Supplier and Exporter in India

CNC Training Lathe

Product Code : EL-CTM-9036
Jlab Export is a leading CNC Training Lathe Manufacturer,and suppliers in India

Part of JLab’s own trainer series, this CNC training lathe is a turning machine for learning part programming and the making of finished components. It swings 200 mm and turns up to 100 mm diameter and 170 mm long, with 300 mm between centres. An 8-station turret carries the tools, and the travels are 150 mm on X and 200 mm on Z.

Specifications

Swing over200 mm
Turning diameter / length100 / 170 mm
Between centres300 mm
Travels (X / Z)150 / 200 mm
Job holding150 mm
Turret8 station
Supplied withCNC system with axis motors and drives, spindle with induction or servo motor
Also standardChip collector with chip bin, coolant system, lubrication system
OptionsAutomatic tool changer, chip conveyor, tooling system with tools, CAD/CAM software, simulation software licences for several users
Other optionsVoltage stabiliser, air compressor, coolant through spindle, job holding fixtures or pallets, special tooling, panel air conditioner
Minimum order quantity1 unit
Dispatch timeUsually 14–18 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Turning Practicals on the Training Lathe

With eight turret stations, a full set of turning, grooving, boring and parting tools can stay loaded, so students can program a complete part in one setting. A typical job is a pin with steps, a radius and a groove, written with G01 and G02 or G03 moves. The class checks it in simulation software before it goes to the machine.

Tool offsets for each station are then set and recorded, and the first part runs with the rapid rate turned down. Students measure the diameters with the External Micrometer and inspect the groove and radius on the Universal Profile Projector. A Surface Analysis System can show how surface roughness changes as the feed per revolution is raised.

Frequently Asked Questions

What comes with the training lathe as standard?
The standard supply includes the CNC system with axis motors and drives and a spindle with an induction or servo motor. A chip collector with chip bin and the coolant and lubrication systems also come with it.

Which options help most in a training lab?
CAD/CAM software and simulation software licences for several users let a whole class program and test parts at computers. A tooling system with tools, job holding fixtures and a voltage stabiliser are other common additions.

Why do tapers and radii come out the wrong size?
A turning tool has a rounded nose, but a program written to the drawing assumes a sharp point. Straight diameters and faces come out right, while tapers and arcs are cut off size. Tool nose radius compensation corrects this once the nose radius and tip direction are entered in the tool offset.

Why practise on a trainer before a production lathe?
A trainer uses the same G-code, tool offsets and work offsets as a production lathe, but on smaller work. Students can learn from their mistakes on a machine that is simpler to set up and quicker to reset.

Other CNC Turning Machines

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 20 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us