• +91-85699-09696

CNC Drilling Machine Manufacturer,Supplier and Exporter in India

CNC Drilling Machine

Product Code : EL-CTM-9077
Jlab Export is a leading CNC Drilling Machine Manufacturer,and suppliers in India

A CNC drilling machine drills holes at positions set by a part program, so a hole pattern no longer depends on marking out by hand. The control moves the drill to each hole centre in turn and feeds it to the programmed depth. This machine is built for mechanical and construction workshops and for training rooms that teach CNC work.

Specifications

Machine typeCNC drilling machine
ControlComputer numerical control from a part program
Used inMechanical and construction workshops
Minimum order quantity1 unit
Dispatch timeUsually 14–18 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Drilling Practicals for Students

Students lay out a simple hole pattern on a drawing, such as a row of holes or a bolt circle. They then work out the X and Y position of each centre from one corner of the plate. They write the program, prove it with a dry run and then drill an aluminium or mild steel plate. Hole spacing is checked with a Vernier Caliper.

For comparison, the same pattern is marked out by hand and drilled on a Pillar Drill Machine, with the plate held in a Drilling Machine Vice. The class then compares the time taken and the spread of hole positions between the two methods.

Frequently Asked Questions

How is a hole pattern programmed?
Each hole is given as an X and Y position from a work zero. The program moves rapidly to the first position, drills, retracts and moves on to the next. Most controls offer a canned drilling cycle that repeats these steps for every hole in a list.

Why choose CNC drilling over a pillar drill?
A pillar drill needs each hole marked out and lined up by eye. A CNC drilling machine works from the program, so the same pattern repeats on every part in a batch with no marking out. That saves time and keeps hole spacing the same from part to part.

What should be checked before a program runs?
Check that the work is clamped firmly, the drill is tight in its holder and the work zero matches the drawing. Run the program once with the drill raised clear of the work, then drill one part and measure it before running the rest.

When should a peck drilling cycle be used?
Use it for deeper holes, where chips pack in the flutes and cannot get out. The drill feeds in a short way, pulls back to clear the chips and let cutting fluid reach the point, then goes deeper. Without pecking, packed chips can overheat the drill or snap it. Shallow holes can be drilled in one feed.

Other Drilling Machines and Drills

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 6 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us