PID Simulator Manufacturer,Supplier and Exporter in India
Product Code : EL-DSO-10341
Jlab Export is a leading PID Simulator Manufacturer,and suppliers in India
PID Simulator (code EL-DSO-10341) is a control systems trainer that simulates a typical closed-loop control system with op amp circuits, so that proportional, integral and derivative control actions can be studied with the input given as a voltage. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Studies | PID control using simulation of a typical closed-loop control system; proportional, integral and derivative modes with input in terms of voltage; all modes with feedback (P, I, P + I, P + I + D) |
| Fixed DC supplies | In-built regulated +12 V / 300 mA and +5 V / 300 mA |
| Variable DC supply | One regulated supply, 0–500 mV / 150 mA |
| Control circuits | Operational amplifier IC OP 07 (6 nos.) |
| Controls | On-board potentiometers for voltage and gain |
| Digital voltmeter | 3.5 digit, dual range, selectable 2 V / 20 V |
| Analog voltmeter | Moving coil, 0–10 V DC |
| Front panel | Glass epoxy PCB, 400 mm x 225 mm, with printed circuit diagram; all important ICs and test points brought out on the front |
| Cabinet | Lightweight shock-proof plastic |
| Power requirement | 220 V AC +10%, 50 Hz |
| Weight | 1.0 kg approx. |
| Dimensions | 430 mm (L) x 230 mm (B) x 90 mm (H) |
| Standard accessories | Power cord, patch cords, instruction manual |
| Quality check | Each simulator is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-DSO-10341 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the PID Simulator Used For?
A PID controller works on the error between the set point and the measured output. The proportional action gives a correction in step with the error but leaves a steady-state offset; the integral action builds up the correction over time and reduces that offset; and the derivative action responds to how fast the error is changing, which damps the response and reduces overshoot. Because the plant is simulated electronically, students can apply a DC input voltage, set the gains with the potentiometers and read the results on the digital and analog voltmeters for each combination — P, I, P + I and P + I + D. The simulator serves control systems and process control practicals in electrical, electronics and instrumentation engineering and diploma courses.
What to Specify When Ordering
- Quantity — the number of simulators for your control systems lab.
- Companion trainers — the compensation, relay control and servo trainers linked below are separate items that can share one quotation.
- Bench instruments — oscilloscopes are separate catalogue items and can be quoted on the same enquiry.
Frequently Asked Questions
Which meters are built in?
A 3.5-digit digital voltmeter with selectable 2 V and 20 V ranges, and an analog moving-coil voltmeter reading 0–10 V DC.
What power supplies does it have?
Fixed regulated +12 V and +5 V supplies, each rated 300 mA, and one variable regulated supply of 0–500 mV at 150 mA.
What are the control circuits built with?
Six OP 07 operational amplifier ICs, with on-board potentiometers to set the voltages and gains; the ICs and test points are brought out on the front panel.
What comes with it, and what mains supply does it need?
A power cord, patch cords and an instruction manual are supplied. It runs on 220 V AC +10% at 50 Hz, weighs about 1.0 kg and measures 430 x 230 x 90 mm.
What should an export enquiry include?
The quantity, the destination country and port or city, the delivery terms you want (for example FOB or CIF), any packing or labelling requirements and the tender reference, if there is one.
Who manufactures the PID Simulator?
Jain Laboratory Instruments Pvt Ltd (JLab) makes it at its works in Ambala, Haryana, and supplies it direct as the manufacturer.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a control systems and electronics trainer manufacturer in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. The simulator is made in JLab’s own works, not bought from a trading company, so engineering colleges, polytechnics, dealers and importers order it from the maker. JLab exports worldwide and ships to buyers in every region — for example Lebanon in the Middle East, Sweden in Northern Europe, Canada in North America, Libya in North Africa and Indonesia in Southeast Asia. Tender buyers can refer to the JLab lab tenders page.
Related Control Systems Trainers
- Study of Compensation Network — lead, lag, limited lead, limited lag and lead–lag compensating networks built with op amps.
- Compensation Design Trainer — a simulated uncompensated system with adjustable damping and built-in square and sine wave generators.
- Relay Control System Trainer — a simulated electronic relay with a simulated second-order linear plant.
- DC Position Servo Mechanism Trainer — position control with a DC servo motor and a servo potentiometer as error detector.
Browse the Digital Storage Oscilloscopes range or all Electronics Lab Equipments.
Request a Quote
For a quotation, use the Add To Cart button or the contact page and give the number of simulators, any companion trainers, and the delivery destination.
Last updated: 22 October 2026
