Pressure Process Control Trainer Manufacturer,Supplier and Exporter in India
Product Code : EL-FOT-10252
Jlab Export is a leading Pressure Process Control Trainer Manufacturer,and suppliers in India
Pressure Process Control Trainer (code EL-FOT-10252) is a process control trainer for practising PID control of pressure. A two-wire pressure transmitter sends the measured pressure to a digital indicating controller, whose output reaches a pneumatic control valve through an I/P converter. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Type of control | PID |
| Control unit | Digital indicating controller, input 4–20 mA |
| Pressure transmitter | Two-wire; range 0–5 bar; output 4–20 mA |
| I/P converter | Input 4–20 mA; output 3–15 psig |
| Control valve | Pneumatic; size 1/2 inch; input 3–15 psig; air to close; linear characteristic |
| Process tank | MS pressure vessel with output valve |
| Air filter regulator | 0–2.5 kg/cm² |
| Pressure gauges | 0–2.5 kg/cm² and 0–7 kg/cm² |
| Mains supply | 230 ± 10 V AC, 50 Hz, single phase; on/off switch |
| Quality check | Each trainer is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-FOT-10252 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with JLab’s Flow and Temperature Trainers?
| Trainer | Process variable | Measuring element | Process |
|---|---|---|---|
| This trainer (EL-FOT-10252) | Pressure | Two-wire pressure transmitter | MS pressure vessel with output valve |
| Flow Process Control Trainer | Flow | Flow measurement sensor | Submersible pump with sump tank; rotameter |
| Temperature Process Control Trainer | Temperature | RTD sensor | Insulated process tank with a two-coil electric heater |
This trainer and the flow trainer both work a 1/2-inch, air-to-close pneumatic control valve through an I/P converter; the temperature trainer controls its heater through an SSR proportional power controller. Pick the pressure model when the practical is about controlling pressure in a vessel.
What Is the Pressure Process Control Trainer Used For?
It teaches how the parts of an industrial pressure loop work together. A two-wire transmitter takes its power and sends its signal over the same pair of wires, and because the signal starts at 4 mA rather than zero, a broken wire can be told apart from a genuine zero reading. The controller compares the transmitter signal with the set point and applies PID action, and its output, converted to air pressure, moves the valve until the vessel pressure settles at the set point. Adjusting the vessel’s output valve changes the demand on the loop, so students can see how well a given set of PID settings recovers from a disturbance.
What to Specify When Ordering
- How many trainers you need.
- Whether the flow or temperature trainers should be quoted with it to make up a process control lab.
- Your delivery destination and any tender reference.
Frequently Asked Questions
What pressure range does the transmitter cover?
0 to 5 bar. It is a two-wire transmitter with a 4–20 mA output, matching the controller input.
What is the process tank made of?
It is an MS (mild steel) pressure vessel with an output valve, and it is the process whose pressure the loop controls.
What does the I/P converter do?
It changes the controller’s 4–20 mA current signal into a 3–15 psig air signal, which is the input range of the pneumatic control valve.
Who manufactures this trainer?
JLab (Jain Laboratory Instruments Pvt Ltd) manufactures it at its works in Ambala, Haryana, India.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a manufacturer of engineering and science teaching equipment in India, incorporated in 2017 and located on Hargolal Road, Ambala, Haryana. The pressure trainer is produced in JLab’s own works, not resold from a trader, so colleges, institutes, dealers and importers buy it straight from the maker and return to it for repeat orders and spares. The company holds MSME Udyam registration UDYAM-HR-01-0003849 as a manufacturing enterprise and Importer-Exporter Code 3317504552. JLab exports worldwide and ships to buyers in every region, with Cameroon in Central Africa, Portugal in Southern Europe, Switzerland in Western Europe, Bangladesh in South Asia and Lebanon in the Middle East as examples. Tenders are covered on the JLab lab tenders page.
Related Pressure and Control Equipment
- Control Valve Characteristics Trainer — three pneumatic control valves: linear, equal-percentage and quick-opening.
- Pressure Measurement Apparatus — a pressure gauge, a vacuum gauge and U-tube, differential and single-tube manometers on a pumped water circuit.
Find more in the Fiber Optic Trainers section of Electronics Lab Equipments, where this trainer is listed.
Request a Quote
Ask for a quotation through the Add To Cart button on this page or the contact page; mention the number of trainers, any companion process control trainers, the delivery city or port and delivery terms such as FOB or CIF.
Last updated: 22 October 2026
