Three Cylinder Four Stroke Petrol Engine Test Rig With Morse Test Manufacturer,Supplier and Exporter in India
Product Code : EL-TELE-9437
Jlab Export is a leading Three Cylinder Four Stroke Petrol Engine Test Rig With Morse Test Manufacturer,and suppliers in India
On this rig a three cylinder, four stroke petrol engine is loaded by a dynamometer. Its air box, fuel tank, manometer and fuel measuring unit are housed in a separate panel box that stands on its own. A temperature indicator shows the jacket cooling water inlet and outlet and the calorimeter temperatures, flowmeters measure both water flows, and provision is made for the Morse test.
Specifications
| Engine | Three cylinder, four stroke, petrol |
| Loading | Dynamometer |
| Panel box | Stand-alone, with air box, fuel tank, manometer and fuel measuring unit |
| Temperatures shown | Jacket cooling water inlet and outlet, calorimeter |
| Flowmeters | Cooling water flow, calorimeter flow |
| Special test | Provision for Morse test |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Practicals: Morse Test and Heat Balance
With all three cylinders firing at a set speed and load, students note the brake power. They then cut out each cylinder in turn, ease the dynamometer load to bring the speed back, and record the lower brake power. The difference is the indicated power of that cylinder. IP1 + IP2 + IP3 gives the engine IP, and BP/IP the mechanical efficiency.
For the heat balance, jacket water flow and temperature rise give the heat to the cooling water. The calorimeter water flow and its temperature rise give the heat the exhaust gas hands over in the calorimeter. With brake power and the heat in the fuel, found from a calorific value measured on a Digital Bomb Calorimeter, the class draws up a heat balance sheet. Ignition timing can be checked first with a Digital Advance Timing Light.
Frequently Asked Questions
How many readings does a full Morse test take on this engine?
Four sets: one with all three cylinders firing and one with each cylinder cut out in turn. Each cut-out reading is taken only after the load has been eased and the engine is back at the set speed.
Why is speed control so important with three cylinders?
Cutting out one of three cylinders removes about a third of the power, so the speed drops sharply. The load must be eased and the speed brought back exactly before the reading, or the friction losses will not match.
What does the calorimeter measure?
The exhaust gas calorimeter is a water-cooled heat exchanger on the exhaust. Its water flow, read on the flowmeter, and the water temperature rise give the heat the exhaust gas passes to that water. Any heat still in the gas as it leaves the calorimeter goes into the unaccounted losses.
How is this rig different from the four cylinder Morse test rig?
This engine has three cylinders, and its panel adds cooling water and calorimeter flowmeters for a heat balance. The Four Stroke Four Cylinder Petrol Engine Test Rig With Morse Test has four cylinders, a 12 V starting battery and burette fuel measurement.
Other Petrol Engine Test Rigs
- Multi Cylinder Four Stroke Petrol Engine Test Rig
- Single Cylinder Four Stroke Petrol Engine Test Rig
- EFI Petrol Engine Test Bed
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
