Drier Manufacturer,Supplier and Exporter in India
Product Code : EL-MWLE-13052
Jlab Export is a leading Drier Manufacturer,and suppliers in India
Larger refrigeration and air conditioning systems hold more refrigerant and oil, so they use a bigger filter drier than a household fridge. This commercial filter drier has 3/8 inch connections and is made for CFC, HCFC and HFC refrigerants. Its working pressure is 650 psi. Like any drier, it takes moisture and dirt out of the circulating refrigerant.
Specifications
| Type | Commercial filter drier |
| Connection size | 3/8 inch |
| For use with | CFC, HCFC and HFC refrigerants |
| Working pressure | 650 psi |
| Minimum order quantity | 50 units |
| Dispatch time | Usually 3–5 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Lab Exercises on Commercial Systems
Students fit the drier on a cold room, display cabinet or split air conditioner trainer. It goes in the liquid line after the condenser, with the arrow pointing toward the expansion device. The line is cut square with a Tube Cutter and the joints are made. The circuit is then pressurised with the Nitrogen Pressure Test Kit, and every joint is brushed with Bubble Solution For Leak Detection while the pressure holds.
Once the test is passed, the system is evacuated with the Fast Vacuum Pumps and the pressures are read on Manifold Gauges For Refrigeration Systems. Teachers can use the job to show why a drier is always changed after a leak repair.
Frequently Asked Questions
Which refrigerants can it be used with?
It is made for systems running CFC, HCFC or HFC refrigerants. Check which group the refrigerant in the system belongs to before fitting it, as other refrigerant types are outside that list.
What does the 650 psi working pressure mean?
It is the highest pressure the drier is meant to see in normal running. The highest liquid line pressure of the system it goes into should stay below that figure.
How can I tell if the drier is blocked?
A partly blocked drier causes a pressure drop, so its outlet feels colder than its inlet and may sweat or frost. The system shows low suction pressure, high superheat and poor cooling. A thermometer reading on each side of the drier confirms the drop.
Is this drier suitable for a household refrigerator?
It is larger than a domestic fridge needs. For refrigerators and small units, the copper Filter Drier with a 6 x 3 mm I.D. inlet and outlet is the usual choice.
Where does moisture in a system come from?
Most of it gets in while the system is open, through open pipe ends during installation, a leak on the low side or oil left uncapped. A short evacuation leaves some behind. The drier holds what is left, so keep pipe ends capped and evacuate fully.
Other Commercial Refrigeration Items
- Refrigerant Recovery Machine
- Flare To Solder Fitting
- Copper Pipe (10 mm and 12 mm rolls)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
