• +91-8569909696

LP6 Ventilator

LP6 Ventilator

Product Code : JL-MV-3960

LP6 Ventilator

Mode: Standby, Assist/Control, SIMV or Pressure Cycle 

Low Pressure Alarm: Set limit for Low Pressure alarm 2 to 32 

cmH2O in increments of 2 cmH2O

High Pressure Alarm Limit: (Assist/Control, SIMV Modes) or limit 

for Pressure Cycle mode: 15 to 90 cmH2O in increments of 5 cmH2O

Volume: Push-to-turn knob: 100 to 2200 mL

Breath Rate: 1 to 20 BPM in increments of 1 BPM and 22 to 38 BPM in increments of 2 BPM

Inspiratory Time: 0.5 to1.0 sec in increments of 0.1 sec; 1.2 sec; and 1.5 to 5.5 sec in increments of 0.5 sec

Breathing Effort: Push-to-turn knob sets pressure level to detect breathing effort (-10 cmH2O/hPa to +10 cmH2O)


Front Panel Input

Patient Pressure: Port for connection to proximal pressure line of 
patient circuit

Front Panel Output

Patient Air: 22 mm x 15 mm tube for connection to bacteria filter
Exhalation Valve: Port for connection to exhalation valve 
of patient circuit

Indicators, Normal Events 

Patient Pressure Meter: Displays patient pressure -10 to +100 cmH2O; can 
also display battery charge and machine hrs of operation
Breathing Effort: Green LED activated by adequate patient breathing effort
Power: LEDs indicate operating power source: green AC Pwr/Batt 
Chg, amber External Battery, flashing amber Internal Battery
Alarms: Flashing red LEDs: Low Pressure/Apnea, Low Power, 
High Pressure, Setting Error, Power Switchover 

Audible Alarms

Pulsating Tone: Low Pressure/Apnea; Low Power, High Pressure, 
Setting Error, Power Switchover 
Steady Tone: Loss of microprocessor control
Reminder Tone: Every 5 mins when powered by Internal Battery, 
each time accessory printer generates report

Rear Panel Controls

AC Circuit Breaker: Internal to AC power switch
(1 for ON; 0 for OFF)

Rear Panel Inputs

Inlet Filter: Intake for patient air; screw off cap for filter change
External Battery: Connection for 12 
VDC battery Communication Port: Calibration information 
during service procedure 



    Download as Pdf  

Office Address

Jain Laboratory Instruments Pvt. Ltd.
Hargolal Road, Ambala Cantt,
Haryana India



Follow Us