• +91-85699-09696

Screwdriver Manufacturer,Supplier and Exporter in India

Image Not Found .

Product Code : EL-WT-12955
Jlab Export is a leading Screwdriver Manufacturer,and suppliers in India

Cross-recess screws in machine covers, appliances and electronic cases are driven with this screwdriver. Its tip is magnetic, the blade is chrome vanadium steel and the handle has a cushion grip. Seven sizes cover tips from #0 to #4, with blades from 75 mm to 200 mm long.

Specifications

Tip typeCross-head
TipMagnetic
MaterialChrome vanadium steel
GripCushion grip
Sizes#0 x 75 mm, #1 x 75 mm, #2 x 100 mm, #4 x 200 mm, 2.5 x 75 mm, 3 x 100 mm, 4 x 100 mm
Minimum order quantity10 units
Dispatch timeUsually 4–6 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Workshop Practice with Cross-Head Screws

A common fitting exercise is stripping and rebuilding a gearbox cover, a table fan or a computer case. Students hold the part in the Bench Vice between its fibre grips, choose the tip number that fills each recess and remove the screws in order. Socket head screws in the same assembly are undone with the Hex Key Set.

Teachers can show cam-out by driving one screw with a tip that is too small and the next with the correct one. Students then see why the driver is pressed firmly into the recess while it turns.

Frequently Asked Questions

How do I choose between the #0, #1, #2 and #4 tips?
Match the tip number to the recess, not to the screw length. Tips #0 and #1 suit small screws in electronics, #2 is the usual size on appliances and machine covers, and #4 is for large screws.

Why does a cross-head screwdriver slip out of the screw?
The sloping sides of a cross recess push the tip out as turning force rises, an effect called cam-out. It gets worse with a worn or undersized tip. Press firmly along the axis, keep the driver in line with the screw and use the tip number that fills the recess.

Does the magnetic tip help on small screws?
Yes. The tip holds a small steel screw in the recess, so it can be started in a deep hole with one hand. It will not hold brass or aluminium screws.

Is this the same as the angled cross-head screwdriver?
No. The angled cross-head Screwdriver in this range is a single 2.5 x 100 mm size for screws a straight handle cannot line up with. This straight driver comes in seven sizes, with a magnetic tip and a cushion grip.

Other Drivers and Sets for Fastening Work

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 6 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us