You have searched for products starting with "T"

Twin rack for both 0.5 ml. & 1.5 ml. micro centrifuge tubes. Each side has 108 holes for 0.5 & 1.5 ml. MCT's respectively. The transparent top provides an excellent view as well as a protection cover for the tubes stored. View Details

These polypropylene tubes provide excellent option for coagulation & bacteriology etc. The cap is screwed on to the tube & hence this tube can be filled up to the brim. View Details

Transparent polypropylene cap for 25 mm test tubes; inner grooves tighten the fit, outer grooves hold labels and a built-in seal ring makes it leak-proof. View Details

Autoclavable six-place test tube stand end-supported by two columns, with holes for 25 mm and 16 mm tubes, matching base wells and six drying pins. View Details

Six-place autoclavable test tube stand with two 25 mm and four 16 mm tube holes, hemispherical base wells and six vertical drying pins; end supported by two columns. View Details

These ingenious racks with a 3-tier design provide clear view of the tube contents & convenient insertion & removal of tubes. View Details

These ingenious racks with a 3-tier design provide clear view of the tube contents & convenient insertion & removal of tubes. View Details

These racks can conveniently hold inverted tubes for drying purpose and minimizes collection of airborne contaminants inside the tube. View Details

Submersible, autoclavable test tube racks in a special polypropylene blend, a substitute for wire racks; stackable when empty and easy to take apart for cleaning. View Details

These are one piece molded racks and have a three tier grid design. They have good chemical and thermal resistance. View Details

This model presents 10 segments in the right lung and 8 in the left. The distributions of the bronchial tree can be observed through the transparent lungs. View Details

Dental care demonstration model of the gums, teeth, tongue and palate, with a brush, for showing tooth form and how the mouth is cleaned and protected. View Details

Transparent human skeleton model, 85 cm tall. View Details

Strong UV resistant plastic construction. Reads in deg F & deg C. The unit consists of three LCD screens. The upper screen reads the Maximum Temperature, the center screen reads the current temperature, and the lower screen reads the Minimum Temper View Details

A safer and technologically advanced way to study heat conductivity in different metals. The unit consists of four metal strips, steel, brass, aluminium and copper, mounted on a strong plastic base. View Details

Adjustable thermometer clamp with 360 degrees rotatable jaws. View Details

Adjustable thermometer clamp with 360 degrees rotatable jaws. View Details

General purpose thermometer mounted on vinyl/plastic back. Dual Scale: -20 to 120 F & -30 to 50 C Dimensions: 1.25 x 5.25 Inch Measurements are approximate. View Details

The Tissue Culture Microscope pairs an oversize 180 x 150 mm stage with extension plates for large bottles, LWD 20x and 40x objectives and Koehler halogen illumination. View Details

The Trinocular Research Microscope has a 360-degree trinocular head with a camera port, a 135 x 140 mm graduated mechanical stage and achromatic objectives up to 100X SL oil immersion. View Details

The Trinocular Stereo Zoom Microscope adds a camera port to a 360-degree stereo head and zooms from 7x to 45x under incident or transmitted 20 W halogen light. View Details

The Trinocular Inverted Tissue Culture Microscope views cultures from below through the vessel base and adds a camera port with a P7x photomicrography eyepiece. View Details

This Trinocular Metallurgical Microscope examines opaque specimens up to 65 mm thick in reflected light, with M4X to M40X achromats and a P7X eyepiece for microphotography. View Details

This Trinocular Upright Metallurgical Microscope views polished metal face up in reflected light, with a 45 degree trinocular head, M4X to M40X achromats and a field-diaphragm illuminator. View Details

The Toolmaker Microscope measures lengths with a micrometer head and angles with a goniometric head, on a 125 mm stage with a 130 mm rotary measuring stage. View Details

The Toolmakers Microscope measures parts on a 152 mm ball-bearing stage, using a graduated eyepiece protractor and green-filtered halogen light from below. View Details

Tests general-purpose, low-power PNP and NPN transistors; a moving-coil meter calibrated in gain (hFE) shows the reading. Works on 220 V, 50 Hz mains. View Details

View Details

View Details

Input and output characteristics of PNP and NPN transistors in common base and common emitter configurations. View Details

Up/down counter trainer using IC 74193: 4 SPDT switches for logic 1 and 0, 1 Hz clock pulse, four output indicators, printed circuit diagram, and switches for up/down counting and reset. View Details

Switch debouncer kit using IC 7400, with one input switch, two output LEDs and sockets for measuring the output voltage. View Details

Clock pulse kit using the NAND gate IC 7400, with one input switch, an LED output and a terminal for measuring the clock pulse frequency. View Details

Transformers are wound with double enameled copper wire and on cores of silicon alloy steel and vacuum impregnated. View Details

Wind-up in strong case Length 15 meters. Cloth with woven metal for strength and long life. View Details

Tuning Fork A-426.6 Tuning Fork B-480 Tuning Fork C-256 Tuning Fork C-512 Tuning Fork D-288 Tuning Fork E-320 For educational purposes only. Not for tuning instruments. View Details

Rubber ball mounted on plastic handle. Used for striking tuning forks. View Details

Solid rubber ball mounted on wooden handle. Used for striking tuning forks. View Details

Chromium plated steel (speciallyment for vibration), plain shank, with frequencies marked. Conical pointed end for accurate and complete transfer of vibration to the experiment base. The frequencies are electronically tested. View Details

Wooden mallet hammers for use with tuning forks sound resonance experiments. Smooth lathe turned natural finish with thin foam striking surfaces. View Details

The set of 13 aluminum tuning forks is designed to demonstrate the consistent specific pitch that is resonated by each fork individually. View Details

Study of TRIAC as line triggered A.C. power switch Study of TRIAC as D.C. triggered A.C. power switch Study of TRIAC as self latching line switch Study of TRIAC as UJT triggered A.C. power switch Study of TRIAC as UJT triggered A.C. power switch with View Details

Study of delayed Turn-ON of D.C. load. Study of auto Turn-OFF of D.C. load. Study of delayed Turn-ON of TRIAC as line switch. Study of auto Turn-OFF of TRIAC as line switch. View Details

Thyristor alarm training board: make- and break-to-operate alarms, tamper-proof burglar alarm, delayed self-latching alarm, and water-level, light (LDR) and temperature (thermistor) alarms. View Details

Practical experience on this board carries great educative value for Science and Engineering Students. View Details

Training board for studying SCR triggering circuits (resistor, R-C and UJT triggering) and half-wave and full-wave controlled rectifiers. View Details

Power Electronic Training Board has been designed specifically for the study of three phase full wave rectifier. View Details

Power Electronic Training Board has been designed specifically for the study of Three Phase Fully Controlled Thyristorized Bridge Converter with Triggering Circuit. View Details

Study of the overload characteristics of the amplifier Study of the frequency response of the individual as well as the cascade amplifier Calculate the output and input impedance of the individual stages as well as that of cascade amplifier. View Details

To study and plot the forward & reverse bias characteristics of a Germanium semiconductor Diode To study and plot the forward & reverse bias (breakdown) characteristics of a Zener Diode View Details

Mode I+ : i.e. T2 positive with respect to T1 and gate positive with respect to T 1 Mode I- : i.e. T2 positive with respect to T1 and gate negative with respect to T 1 Mode III+ : i.e. T2 negative with respect to T1 and gate positive with respect to T 1 View Details

Break over voltage, VBO Negative resistance region VBO symmetry and delta V View Details

To determine experimentally the Drain characteristics of a given MOSFET To study the use of MOSFET as an amplifier and to measure its voltage gain in common source configuration View Details

Measuring the characteristics of a line Measuring the attenuation of a line Measuring the Input Impedance of the line Phase displacement between the current & voltage at input of line View Details

Computer Logic Training Board has been designed specifically to study OR, AND, NOT, EX-OR & NAND logic gates and to verify the truth table of various logic functions by using universal NAND gates. View Details

The output of the Flip-Flops can be observed with the help of logic level indicators (LEDs), which are provided on the panel. The board is absolutely self contained and requires no other apparatus. View Details

These Tall Form Beakers, Borosilicate Glass, Economy are tall, narrow borosilicate beakers made in ten capacities from 50 ml to 5000 ml. View Details

This three-way T bore stopcock in borosilicate glass has a PTFE key that switches flow between its arms, and it is made in 2 mm and 4 mm sizes. View Details

This three-way T bore stopcock is made of borosilicate glass with a glass key, needs a thin grease film and comes in 2 mm and 4 mm sizes. View Details

The Tall Screw Neck Vial in neutral glass comes with a closure in seven sizes, from 0.5 dram (1.75 ml) up to 8 dram (28.25 ml). View Details

Tubes, Drying, Angled are angled drying tubes with a standard cone, offered in B10, B14, B19, B24 and B29 cone sizes for jointed apparatus. View Details

Tubes And Air Inlets, Bent With Cone are bent inlet tubes with a 150 mm stem, made with a B14, B19 or B24 cone to fit a matching socket. View Details

Tubes and Air Inlets, Straight With Cone are straight inlet tubes with a 100 mm stem, made with a B10, B14, B19, B24 or B29 cone. View Details

Thermometer Pockets hold a thermometer inside a jointed vessel and are made with a 45 mm stem and B14 cone or a 200 mm stem and B19 cone. View Details

Thermometers With Cone fit straight into a B14 socket and are offered in 0-110, 0-200, 0-300 and 0-400 C temperature ranges. View Details

Masses set used with Balance to increase Capacity up-to 2610 gm. View Details

Triple Beam Balance are specially designed to handle weighing solids and powder. Three notched and tiered beams with centre reading . Indicating sliding masses giving total weighing capacity of 610 gm. View Details

This Geared clock Accurate to the hours with the movement of minute Arm. This geared demonstration clock is a great manipulative of time-telling skills for your students. View Details

Tangram set of seven shapes: five right triangles (two large, one medium, two small), a square and a parallelogram, by JLab. View Details

Teacher geometry set of plastic instruments for drawing angles and circles of various sizes and measuring lines, rectangles and squares on a blackboard or whiteboard, by JLab. View Details

Theodolite model with a movable telescope on horizontal and vertical axes and graduated circles on both, for teaching how horizontal and vertical angles are measured, by JLab. View Details

Kit of assorted-colour right-angle triangles with a digital stop watch, for calculating the work done by different groups in the same time span. By JLab. View Details

Set of 4 transparent dice, 2 red and 2 blue, each measuring 18 mm, for probability and number activities. By JLab. View Details

Set of big transparent solid figures (cube, cuboids, cone and 2 hemispheres) for whole-class demonstration of 3D geometry. By JLab. View Details

Set of plastic rods in 10 sizes and 10 colours; each colour stands for a different length and unit value. For number, fraction and measurement work. By JLab. View Details

Trigonometry board for exploring how the sides and interior angles of a right triangle relate through the sine, cosine and tangent ratios. By JLab. View Details

Set of 10 Geometrical Shapes to show Inner Area, Slant Height & Vertical Height View Details

The Tray Dryer dries wet solids on 16 x 32 in trays in blower-driven hot air from 50 to 250 C and is made in 12-tray and 48-tray sizes. View Details

The Tissue Homogeniser breaks up tissue, plant, food and soil samples in a homogenising vessel of 25, 50 or 100 ml fitted in a holder. View Details

Extremely useful for pharmaceutical labs Highly accurate and easy to operate High stirrer speed accuracy View Details

The Tap Density Tester taps 100 and 250 ml cylinders on 2 stations and calculates tapped density, compressibility index and Hausner ratio. View Details

Tissue Flotation Bath is useful to float tissue wax sections to flatten for staining process. Double Walled chamber, inner made of black anodised aluminum and outer wall made of mild steel sheet duly painted. View Details

Tissue Culture Station Single Unit is Compact model, suitable for use in small Laboratories. Supplied with One S.S. Basket Rotor, One S.S. View Details
Consists of following features:- Tuning fork:- N-100 with stylus. View Details
Differnt types of Tambours are available with following features:- View Details

The Tablet Polishing Pan is a detachable, canvas-lined mild steel pan, 12 in across and 8 in high, used to give coated tablets a gloss. View Details

This Tablet Making Machine (Electrically Operated) is a hammer type single-punch press driven by a motor on 220 V AC, 50 Hz, single phase. View Details

The Tablet Making Machine Motorised presses tablets one at a time and has its own motor for a 220 V AC, 50 Hz single-phase supply. View Details

The Tablet Making Machine Hand Operated presses tablets up to 100 mg with a 9 mm punch and die, worked by a hand wheel with automatic feed and ejection. View Details

The Tablet Hardness Tester Pfizer Type squeezes a tablet between stainless steel jaws like pliers and shows the breaking force on a dial reading 0-20 kg. View Details

The Tablet Coating Pan turns tablets in a 12 in stainless steel pan driven through an oil-immersed gearbox, with a hot air blower to dry each coat. View Details

The Tablet Hardness Tester is a Monsanto-type screw and spring tester that reads the breaking force of a tablet from 0 to 20 kg in 0.1 kg divisions. View Details

The Tablet Counter Tablet Counting Device is an anodised aluminium counter with a pouring lip and handle, used to count tablets in lots of 100. View Details

Laminated on both sides with thick plastic film Fitted with plastic rollers Available in English language only View Details

Laminated on both sides with thick plastic film Fitted with plastic rollers Available in English language only View Details

Laminated on both sides with thick plastic film Fitted with plastic rollers Available in English language only View Details

Charts are printed on art paper in full colour Fitted with plastic rollers View Details

Charts are printed on art paper in full colour Laminated on both sides with thick plastic film Fitted with plastic rollers View Details

Printed on Synthetic in original colours Size:- 70 x 100 cm View Details

Printed in full color, laminated on both sides with thick plastic film and fitted with plastic rollers. View Details

Laminated with thick plastic film on both sides. Fitted with superior plastic rollers. View Details

Depicts the Causes, Symptoms, Treatments, care to be taken. Laminated with thick plastic film on both sides View Details

Depicts the Causes, Symptoms, Treatments, care to be taken. Laminated with thick plastic film on both sides View Details

Slings, knots and bandages for various parts of body. Size:- 50 x 75 cm View Details

Shows how to carry an injured person while keeping movement of the injured part to a minimum. Size: 50 x 75 cm. View Details

Printed in very attractive and natural colors. These are a must for elementary knowledge of the language. View Details

Printed in very attractive and natural colors. These are a must for elementary knowledge of the language. View Details

Printed in very attractive and natural colors. These are a must for elementary knowledge of the language. View Details

Test Sieves have an 8 inch one-piece spun brass frame and stainless steel 18/8 or phosphor bronze cloth, and come with lid and receiver in all mesh sizes. View Details

The Total Station measures angles and distances with an EDM, in 3 and 5 second angle accuracy versions, and runs on rechargeable AA batteries. View Details

The Titanic Compass is a 3 inch nautical-style magnetic compass with a brass finish. View Details

The Thread Compass is part of the nautical compass range from JLab, sold alongside its sundial and pocket compasses. View Details

This Tripod Stand in brass and aluminium carries transits, theodolites and levels on adjustable legs, with a mounting screw for accurate positioning. View Details

Durable virgin plastic counters, 30 mm in diameter and 2 mm thick, for sorting, patterning, colour recognition, counting and operations in centres, small groups or at student desks. View Details

A teacher geometry set gives teacher the ability to draw angles, circles of various sizes and also to measure the length of lines and size of rectangles and squares on black board or white board. View Details

Kit of five different sets of congruent triangles for teaching the classification of triangles by sides and angles, as a group activity for five groups. View Details

Plastic rods in 10 different sizes and 10 colours; each colour stands for a different length and numeric unit value. View Details

Kit of assorted-colour right-angle triangles with a digital stopwatch, for calculating the work done by different groups in the same time span. View Details

A theodolite is an instrument for measuring both horizontal and vertical angles. View Details

Trigonometry board is designed with the focus to enhance geometric visualization competence in the learning of Trigonometric concepts and results related to circle and resolution of problems related to it. View Details

Tissue Culture Rack made out of mild steel pipe frame. Distance between shelves to shelves is 16 View Details

A newly improved traction table suitable for Lumber or Cervical Traction. This table can also be used for other treatment instruments. View Details

Dual Channel TENS mode Low and high devices are used for symptomatic relief. Management of chronic (long-term). View Details

Operates in static or intermittent mode. Digital display for hold time and rest time. Feather touch selection for treatment time with digital display View Details

Suitable for various industrial, laboratory and R&D applications. Heavy Forced Air Circulation View Details

Needle Syringe Destroyer with 3 in 1 operation in single body. Burning of needle cutting of syringes and manual cutting of needle are also provided in case of electricity failure. View Details

Tissue flotation water bath is most ideal for Histological, chemical, clinical and bacteriological laboratories used to stretch and dry cut tissues. View Details

Specifications of Water bath but temperature controlled by solid state controller with stirrer with S.S. rod & blade to make temp. of bath all-round uniform and constant. View Details

Displays SpO2, Pulse Rate, and Plethysmograph Digital SpO2 Technology to reduce alarms and improve performance during motion and low perfusion Graphical & Tabular Trend Memory View Details

High quality tongue depressors manufactured with selected and seasoned wood of birch. Tongue depressors are of high quality and has low price for hospital /clinical and surgical use. View Details

Comprising a Plano-convex lens of about 38mm diameter x 150mm FL Mounted in a tube about 400x50mm (length x diameter) View Details

A bakelite ring or bobbin is of 165 mm diameter with 3 windings of 2, 50, & 500 turns. The magnetometer is supported on a brass tube fitted on an ebonite plate which is free to revolve in the base of the instrument. View Details

Thompson Indicator Straight Line Motion Science Labs One of sixteen mechanisms built on an A3 board equally suitable for the classroom, drawing office or laboratory. View Details

A high quality tellurium designed to demonstrate on a large scale the relative movements of the Sun. Earth and Moon, so as to understand the causes of a number pf phenomena such as day and night. View Details

Low cost, effective teaching Self contained Easily seen from a distance Mechanism clearly understandable Loci drawn for further study Standard mechanism for an operations gear. View Details

These are easy-to-install and demand low operational costs. Thus gain acknowledgement of our clients from every nook & corner of the world. View Details

Ticker Tape Timer AC:- For the measurement of speed and acceleration. It operates on 12V AC and is safe for students. Paper tape, drawn through guides, is struck by a dotting screw carried on the armature. View Details

Telegraph Set :- Morse sounder and key fitted on teak wood base of two units, consists of aluminum parts. Telegraph Set :- Export quality open working Model on teak wood base of two units, consists of all Brass Parts. View Details

Non-mercury thermometer for measuring water temperature in an educational setting or water sampling applications. View Details

Crucible tongs that keep the hands at a distance from hot crucibles; rust resistant, with a comfort grip, in different sizes. By JLab. View Details

Tripod stands in three styles: 125 x 200 triangular wire with chrome plating, 125 x 200 triangular sheet with black powder coating, and 3 in or 4 in round cast iron with black coating. View Details

Set of 20 thin-section slides of igneous, sedimentary and metamorphic rocks for study under the microscope, by JLab. View Details

Set of 20 thin-section slides of minerals, mounted on glass slides with covers, for study under the microscope, by JLab. View Details

Set of 20 mounted thin-section slides of rocks and minerals, including igneous, sedimentary and metamorphic rocks, by JLab. View Details

Main trunk stream system of water and sediment movement from collecting system towards dispersing system. View Details

Transform plate boundaries move horizontally past each other on strike-slip faults. Lithosphere is neither created nor destroyed. View Details

Made of Rigid PVC with a mark able and Washable Surface. With Hard Backing, Aluminium Frame and Hooks. Shows different parameters how volcanoes take place and the hanging feature thereafter. View Details

The Earth's interior 3D model made of rigid PVC with a markable, washable surface, hard backing, aluminium frame and hooks. View Details

Demonstration type, overall size 60 x 40 cm with table stand. To teach 24-hours time concept and format. View Details

Magnetic equipment by JLab to verify that the square on the hypotenuse is equal to the sum of the squares on the other two sides. View Details

Cone and Cylinder fabricated from sheet metal duly painted. To demonstrate volumetric relationship. View Details

A set of two cylinders for studying the volume of a cylinder; the small cylinder fits into the large one. View Details

Cleaning brushes specifically designed for test tubes are offered here. View Details

Single-pan, low-form triple beam balance (regular quality) weighing up to 610 g on its beams, or up to 2610 g with weights added at the end of the beam. View Details

We are exporter and suppliers of Tapping Key which are used in lab experiments. View Details

Our organization is engaged in manufacturing, exporting and supplying optimum quality Thermo Hygrometer Digital Clock (4-in-1). View Details

Thermo hygrometer clock showing temperature, humidity and time together on one large display, with big buttons. By JLab. View Details

With looks like analog stop clock, it has a digital display which is easy to read. View Details

Labelled diagram of a leaf in transverse section, mounted on a cardboard base with numbered parts and a label key. View Details

TDS meter for conductivity, TDS and salinity of aqueous solutions, with 3 1/2-digit LCD, platinum dip cell and two ranges, 0-2000 ppm and 0-20 ppt. View Details

Telephone trainer is the imitation of a real phone. It displays the internal structure of a telephone View Details

Terrestrial telescope model is crafted with an aim to showcase the principle of a terrestrial telescope. View Details

Borosilicate glass test tubes in various capacities for holding, mixing and heating small quantities of aqueous solutions in chemistry labs. View Details

Wire-type test tube holder of plated steel wire with a finger grip and wire collar, aligned for a firm grip on the test tube. View Details

Peg-type wooden test tube holder, well finished, with a spring closing action using metal wire. Made by JLab. View Details

We also have test tubes with screw cap to avoid spillage while storing the chemicals for experiments. View Details

Third hand magnifier is a handy tool that allows you to perform intricate jobs on given components. View Details

Owing to the industrial standards, we carry a broad range of high quality three pin top used in connecting various electrical devices. View Details

Transilluminator for viewing DNA and RNA separated by electrophoresis through an agarose gel, used in molecular biology labs. Made by JLab. View Details

Set of eight aluminium alloy tuning forks from 256 Hz (C) to 512 Hz (C), each engraved with its note letter and frequency, for sound experiments and acoustic research. View Details

As the name suggests, it measures turbidity which means cloudiness or haziness of a fluid caused by large numbers of individual particles that are generally invisible to the naked eye. View Details
Tracer (tracing light box): MDF frame with plywood bottom and laminated finish, hinged thick-glass top in a wooden frame, white inside, tube light inside and outside. View Details

Trulla pattern laboratory spatula 175 mm length Stainless Steel View Details

Triangular magnetic stirring bar for dissolving solids and mixing sediments; PTFE with an Alnico V magnet. View Details
The high energetic rare earth magnet has higher torque and efficiency as compared to conventional stirring bar. View Details

Set of Four Forks. A tuning fork is a fork-shaped acoustic resonator used in many appliances to produce a fixed tone. View Details

This travelling microscope rides on two rails fixed to a rigid bed and measures small lengths with a vernier scale, a fine screw and cross-hairs in the eyepiece. View Details

Training Panel Function of Gas Heater is used to illustrate the functioning of a gas combination water heater. View Details

We are providing very high quality temperature logger that is compact, fault resistant and easy to use. Our temperature logger can provide a very high temperature sampling rate. View Details

Direct reading of jib and tie loads using spring balances. Demonstrates the application of tension coefficient to evaluate forces in three dimensions. Range of Experiments. To determine experimentally forces induced in individual frame members. View Details

To study the vertical equilibrium of a two and three wire suspension system. To examine the action of the central vertical redundant force. View Details

Trio Globe, a world globe for school geography teaching, made by JLab in Ambala, India. View Details

Thistle funnel stout walled, pitcher shaped funnel size (stem length) available are 300 mm. View Details

Tripod stand (triangular top, length of side 125 mm, height 154 mm) in number. View Details

Tongs(test tube holder) crucible tongs, stainless steel, length 200 mm in number View Details

Y-shaped 3-way tubing connector made of polypropylene, with ribbed ends. View Details

Tall form, with spout, Borosilicate glass, graduated. View Details

Borosilicate glass test tubes listed by length x outside diameter from 75 x 10 mm to 150 x 24 mm, walls 1.0-1.2 mm, including rimless sizes, by JLab. View Details

Borosilicate glass test tube with side arm, 150 mm long and 24 mm in outside diameter, by JLab. View Details

Polished wooden test tube rack with a heavy wooden base for stability, 16.5 inches long and 3 inches high, by JLab. View Details

Glass laboratory thermometers: a yellow-backed mercury-filled stirring type in two sizes and a white-backed red spirit-filled type, by JLab. View Details

Laboratory tongs: stainless steel beaker tongs with 25 mm wide jaws, and blackened steel crucible tongs with a flat hinge, 200 mm long, by JLab. View Details

Stainless steel trolley with two shelves, rails on three sides of the top shelf and a tubular frame on four 10 cm swivel castors; 75 x 45 x 90 cm overall, by JLab. View Details

Operates from 6-12V ac supply Complete with 220v built in step down transformer for 6 - 12 v output with vibrating ticker tape dot. View Details

Thermostat, bimetallic, for operation on gas supply and burner with handle complete 1x10 inch (25 cm) View Details

Tuning forks made of stainless steel frequency 256 to 512 HZ. View Details

This model presents 10 segments in the right lung and 8 in the left. The distributions of the bronchial tree can be observed through the transparent lungs. View Details

Trauma simulator for practising wound washing, disinfection, haemostasis, enswathement and open-fracture care on burn, wound and fracture modules from the face to the foot. View Details
Self-contained process trainer that simulates the separation of gases and liquids in a crude oil production stream, using see-through gravity separation vessels. View Details

Half-size youth torso model with head, approx. 46 cm high, dissectible into 7 parts, on a base, numbered with an English key card. By JLab. View Details

Life-size sexless torso in 10 parts with a removable eye with optic nerve, half brain, lungs, heart and digestive organs, numbered with an English key card. By JLab. View Details

Life-size human torso in 14 parts with interchangeable sex organs, numbered with an English key card. By JLab. View Details

Life-size 24-part torso with interchangeable sex organs, cut-away spine, head with buccal cavity, half brain and eye with optic nerve, on a base. By JLab. View Details

Life-size 17-part torso with muscles and an opened neck and back showing the vertebral column, spinal cord, meninges and nerves; on a base. By JLab. View Details

Bench-top electronic balance in eight TTB models from 3 kg to 30 kg, with up to 30,000 counts, a red LED display and a built-in rechargeable battery. View Details

This 20 L table top autoclave has automatic control and water inlet, 121 C and 134 C sterilising settings and an auto-dry mode, on a 2000 W supply. View Details

Mechanical clockwork thermo-hygrograph recording temperature from -15 to +65 C and relative humidity from 0 to 100% on a daily or weekly chart. View Details

Vivid demonstration of oxidation-reduction reactions. A flask containing pale yellow liquid is gently swirled until the solution turns red. View Details

Microslide set of 8 related 35 mm images on cell structure, photographed through a microscope at stated magnifications, with a text folder; for a Microslide Viewer. View Details
The Kingdom Monera Microslide: 8 related 35 mm microscope images of bacteria and blue-green algae, from Staphylococcus and Bacillus to Oscillatoria and Nostoc, with a text folder. View Details
Amoeba / Actinophrys (200x) - Phylum Sarcodina, Paramecium (100x) - Phylum Ciliophora, Plasmodium Vivax (100x) - Phylum Sporozoa View Details
The Kingdom of Fungi Microslide Set: 8 related 35 mm microscope images of fungi, from Rhizopus, Peziza and yeast to the mushroom and lichen, with a text folder. View Details

Microslide set of 8 related 35 mm images on the plant kingdom, photographed through a microscope, with arrows, callouts and a text folder; viewed through a Microslide Viewer. View Details

Microslide set of 8 related 35 mm images on the earthworm, photographed through a microscope, with arrows, callouts and a text folder; viewed through a Microslide Viewer. View Details

After the cell is set up, a brief current is applied (with a 9-volt battery) causing the formation of hydrogen gas bubbles on one electrode and oxygen gas bubbles on the other. View Details

This kit contains the enzyme, exposed film and buffers necessary to carry out experiments into the effect of pH and temperature on Trypsin. View Details
Trypsin powder in a 25 g pack, a protein-digesting enzyme for enzyme practicals; keep in a refrigerator at 4 degrees C. By JLab. View Details

Explore how genes respond to their environment: students use a commonly found microbe to investigate the effect of temperature on gene regulation and expression. View Details

A fun and engaging way for students to learn about the harmful effects of smoking. View Details

Microslides are sets of 8 related 35mm images as photographed through a microscope to be viewed through a Microslide Viewer JLab. View Details

Demonstration board kit on the immune system: students place plastic phagocytes, T and B cells, plasma cells and antibodies to show how the body responds to antigens. View Details

Microslide lesson set on the reflex arc: eight related 35 mm photomicrograph images with arrows and callouts, and a text folder with a storage pocket. View Details

Incisors Canines Dental Flossing Molars x.s View Details

Microslide set on the circulatory system: eight related 35 mm images, from artery and vein, lung capillaries, blood and a phagocyte to lymph vessels and the rat heart, with a text folder. View Details
Microslide set on human digestion: eight related 35 mm images, from taste buds and a salivary gland to the stomach lining, gastric glands and intestinal villi, with a text folder. View Details

Microslide set of photomicrographs on the senses: Pacinian and Meissner's corpuscles, free nerve ending, nasal epithelium, eye, cochlea, organ of Corti, taste buds, retina, rods and cones. View Details

Half-size youth torso, about 450 mm tall, dissectible, with a numbered key card; removable parts include the head with brain and eye, lungs, heart, liver, stomach, intestine and kidney. View Details

Easily removable parts make them an excellent teaching aid. Natural size, 14 parts. View Details

Dimensions overall 435 x 270 x 900mm. approx. Easily removable parts make them an excellent teaching aid Natural size, 10 parts View Details

Rimmed 12 mm glass test tube from the micro science spares, used for small-scale reactions and heating in school chemistry practicals. View Details

Thermometer reading 0 to 150 C from the micro science spares, for heating, boiling point and microscale distillation practicals. View Details

Thermometer reading 0 to 50 C from the micro science spares, for small temperature changes in reactions run near room temperature. View Details

Self-contained microscale titration kit for secondary school chemistry, with accuracy up to 2 decimal places and results close to Class B glassware. View Details

A side view of upper and lower teeth makes this a 'three models in one' teaching tool. View Details

Folding magnifiers fitted in frame, superior quality. View Details

Classroom science kit with seven activities on why we eat, what cats eat, human and animal teeth, tooth decay and how well pupils brush. View Details

Thermometer with a 0 to 150 C scale from the micro science spares, used when a liquid is heated or a vapour temperature is read. View Details

Low-range thermometer with a 0 to 50 C scale from the micro science spares, for experiments that stay close to room temperature. View Details

The JLab ten layer DNA molecular model is a 3D model of a double helix with 640 atom parts and a stand. View Details
Excellent quality models produced from precision engineered moulds and materials. View Details

Mercury (Mariner) Venus (Mariner) Mars (Viking) Pluto (Pair at 24 Hours) View Details

Molymod kit for building a section of Terylene polyester from its two monomers, to teach condensation polymerisation and ester links. View Details

A complete water science lesson in each kit. Includes fifty test strips each for pH, hardness, alkalinity, fluoride, and chlorine. View Details

A complete water science lesson in each kit. Includes fifty test strips each for alkalinity, phosphates, pH and nitrates/nitrite. View Details

High-vacuum electron tube with thermionic cathode for demonstrating the thermoelectric effect. View Details

Semi-evacuated electron tube filled with low-pressure helium and containing a tangential and axial electron gun. View Details

The electron beam can be deflected electrically in the electric field of the built-in plate capacitor, and magnetically by using the Helmholtz coil pair D. View Details

Pair of Helmholtz coils for generating a uniform magnetic field perpendicular to the axis of the Tel tron D series tubes. View Details

Tel tron Tube Holder S allows the coils to be configured in the Helmholtz geometry or at variable distances to produce magnetic fields aligned vertically, or coaxial, with respect to the tube axis. View Details

High-vacuum electron tube with divergent electron gun aimed at a fluorescent screen partially obscured by a Maltese cross. View Details

Highly evacuated electron tube with focusing electron gun and fluorescent screen inclined relative to the beam axis so that the path of the beam can be seen and the effects of electric and magnetic fields can be studied. View Details

Highly evacuated electron tube with focusing electron gun and fluorescent screen inclined relative to the beam axis so that the path of the beam can be seen and the effects of electric and magnetic fields can be studied. View Details

Three rubber feet prevent slipping and provide maximum stability. View Details

The Auxiliary Coil can be inserted into the stepped front side of the tube holder. View Details

The Thermal Conductivity of Insulating Powder set-up measures how well a powder insulates by heating it between two concentric copper spheres. View Details

The Thermal Conductivity of Metal Rod set-up finds k for a copper bar from the heat carried off by its water jacket and the temperature drop along it. View Details

Press stud type are compatible with a standard PP3 battery clip. View Details

12 samples of soil types. 15mL of each air-dried and sieved soil types: View Details

Includes an illustrated teacher's and student's guide with easy-to-follow instructions. View Details

Lilac Leaf Working layers of the leaf Upper Epidermis and Palisades View Details
Buttercup Root Central Cylinder Root Tip - Root hairs View Details
Fibrovascular Bundle (corn) Red Clover Stem Corn Stem View Details

Dimensions overall 330 x 250 x 65mm. approx. View Details

Large size beautiful model of a typical flower, all parts detachable. View Details

An electron microscopic structure, showing a portion of wall removed to show ectoplast, plastids, tonoplast, vacuoles nuclear structure, endoplast, mitochondria etc. View Details

JLab Transformer accessory set is used to demonstrate that step down transformers can produce currents that are large enough to weld metals or boil water. View Details

Mounted on base with hand crank provided for manual operation. View Details

All units have a base measurement of 165 x 100 mm and have 4 mm socket terminals where appropriate. View Details

JLab Transformer accessory set is used to demonstrate that step down transformers can produce currents that are large enough to weld metals or boil water. View Details

Lenz law transformer accessory to demonstrate the production of large magnetic fields and Lenz law damping on pendulums with and without slits. View Details

This cutaway section model is constructed of light and strong metal and mounted on base. View Details

All units have a base measurement of 165 mm x 100 mm and have 4 mm socket terminals where appropriate. View Details

Designed to suit curriculum based experiments for the topics of Force & Motion. View Details

A series of tubular meters used to investigate the measurement of force involving either a push or a pull action. View Details

A series of tubular meters used to investigate the measurement of force involving either a push or a pull action. View Details
A series of tubular meters used to investigate the measurement of force involving either a push or a pull action. View Details
A series of tubular meters used to investigate the measurement of force involving either a push or a pull action. View Details
A series of tubular meters used to investigate the measurement of force involving either a push or a pull action. View Details
A series of tubular meters used to investigate the measurement of force involving either a push or a pull action. View Details
A series of tubular meters used to investigate the measurement of force involving either a push or a pull action. View Details

Ticker Tape Carbon Discs, 50mm dia with 4mm hole, for Ticker Tape Timers. View Details

A specially designed stand to hold our ticket tape rolls, with easy possible. View Details

These devices use an electromagnet which activates a striker, producing dots via a carbon disk on the ticker tape. View Details

Ticker Tape Rolls for Ticker Tape Timers. 30m x 15mm. View Details

These devices use an electromagnet which activates a striker, producing dots via a carbon disk on the ticker tape. View Details

A clear polished acrylic prism for optics experiments. View Details

A clear polished acrylic prism for optics experiments. View Details

When the 4 mm sockets pair are selected and driven with a 5 V DC voltage, a temperature difference will be created and conducted by the aluminium plates. View Details

The coil is enclosed in a glass tube of borosilicate glass to contain paraffin oil. View Details

The Telescope and Microscope Kit combines a 50 mm refractor telescope with a die-cast metal beginner microscope so students can view distant objects and microscopic organisms. View Details

The Trinocular Microscope with LED Illumination Series 40X-1000X takes an 8 inch LCD touchscreen with 2.0 MP camera on its C-mount port for on-screen viewing. View Details

The Trinocular 5W LED Kohler Illumination microscope adds a 50/50 phototube and 0.5x C-mount to plan achromatic optics and 5W LED Kohler lighting. View Details

The Trinocular Digital Microscope with LCD Touch Pad 5W LED Kohler Illumination shows the specimen on an 8 inch touch screen with a built-in 2 MP camera. View Details

The Tri Power LED Stereo Microscope turns between three objectives for 10X to 30X or 20X to 40X and lights specimens from above or below. View Details

The Trinocular Zoom Stereo Microscope 3.3x-90x Magnification has a 50/50 camera port and a full HD camera and display that record to an SD card. View Details

The Trinocular Zoom Stereo Microscope 6.7x-45x Magnification splits light 50/50 between its eyepieces and a camera tube for viewing and imaging together. View Details

The Trinocular Zoom Stereo Microscope zooms from 7x to 45x on a pillar stand and has a C-mount ready port for attaching a camera. View Details

High-quality yet affordable, this prepared slide set is great for teaching students about textile fibers. View Details

Thermal Cycler provides consistent, reliable results for laboratories with medium to high throughput. View Details

This kit is an excellent tool for teaching technology and has been designed with the CAPS curriculum in mind. View Details

The track and bracket form part of the dynamics track system. View Details

A clear face, easy to read ammeter on a sturdy base. Mounted in a plastic case. View Details

An easy reading voltmeter with the sturdy base. View Details

The Tenoning Machine cuts tenons up to 5 in long with two carbide cutter blocks, on an 18 x 7 in table with 8 in of travel. View Details

This TIG Welding Machine comes in 200 A to 600 A models with high-frequency arc start and optional pulse and water cooling, and welds sheet down to 0.6 mm. View Details

This TIG Welding Equipment is used for tungsten inert gas welding, in which an argon-shielded tungsten arc melts the joint and filler rod is added by hand. View Details

This Tube Bending Machine bends large diameter pipe hydraulically to any angle from 0 to 180 degrees, in manual or automatic mode, with several angles bent in turn. View Details

The TIG Welding Machine welds with a non-consumable tungsten arc and high-frequency start, in 200 A to 600 A models with pulse and water cooling options. View Details

This tapered triangular file on a hardwood handle is used to score glass, clear square corners, file internal angles over 60 degrees and re-shape threads. View Details

Thermometer Armor Cases are constructed of Nickel-Plated Brass, Blue Plastic, or Aluminum View Details

General purpose toolkit. Complete with carrying bag. View Details

Climbing towers for height measurements is a thing of the past. View Details

Traffic Safety laser-based equipment has been used for years by law enforcement agencies around the world. View Details

Trimble Agriculture are the pioneers engaged in offering best quality range of AG solutions. View Details

This Triple Prism Set acts as the reflector for a total station or theodolite, with a target, a zero prism constant and a plastic carrying case. View Details

This Telescopic Alidade sights objects in a plane table survey along its fiducial edge and uses a stadia diaphragm to find distances and elevations. View Details

This Tracing Table lights a translucent plastic top from inside a wooden or metal box so that existing drawings can be traced onto a fresh sheet. View Details

The Triaxial Test Set holds 70 mm soil specimens for UU, CU, CD and unconfined compression tests, with cell, split mould, latex membranes and porous discs. View Details

Plated steel test bar moulds with a 254 mm gauge length between embedded contact points, offered as a two-gang 25.4 mm or a single 101.6 mm square mould. View Details

The Torsion Testing Machine twists metal wire, tubes and sheet with a geared motor and measures the torque with a pendulum dynamometer. View Details

The Tensile Testing Machine tests the tensile strength and elongation of wires, cables, plywood and metals in capacities up to 10,000 kgf. View Details

The Two in One Belt Grinder is an abrasive belt grinding machine built to a two-in-one design, offered in the strength of materials lab range. View Details

The Threading Tool Holder takes a carbide thread insert on a clamp or pin lock for external threading, with an offset shank and neutral rake. View Details

The Thread Gauge checks the pitch of a screw thread by matching a toothed leaf to it, and is made to the buyer specification for workshop use. View Details

The Tilting and Swiveling Vice holds work at compound angles for milling and drilling, with 360 degree swivel, 90 degree tilt and V-grooved jaws. View Details

The Tilting Flume Apparatus is a 76 mm wide acrylic-sided open channel whose bed slope can be set between -1% and +3% by a jacking system. View Details

This Thread Sucking Machine pulls loose thread ends, lint and dust off finished garments by suction and traps them in an easily removable lint filter. View Details

Transparent Hydraulic Components is a cut-section set of valves, cylinders and a gear pump that shows students how each hydraulic part operates inside. View Details

Transparent Pneumatic Components is a cut-section set of direction control valves and cylinders that shows how pneumatic parts are built inside. View Details

This TIG Welding Machine is an AC/DC tungsten inert gas welder with a 10-250 A range, gas shield control and a water-cooled torch on rubber wheels. View Details

This steel Tool Box measures about 175 x 200 x 500 mm and has two trays, carrying handles and a locking catch that takes a padlock. View Details

This Tap and Die Set, Metric Small holds HSS taps and circular split dies in seven sizes from 6 to 12 mm, with die stocks and tap wrenches in a fitted case. View Details

This Tap and Die Set, Metric Large holds HSS taps and circular split dies in six sizes from 14 to 24 mm, with die stocks and tap wrenches in a fitted case. View Details

The Thermal Conductivity of Metal Rod set-up heats one end of a metal bar and cools the other in a water jacket, so the temperature profile and thermal conductivity can be found. View Details

This Three Stage Spur Gear trainer has four parallel shafts, coupling pins, a weight driven cable drum and flywheels for studying gear ratio and inertia. View Details

The Temperature Control Heat Exchanger setup teaches shell and tube and plate type heat exchangers together with a feedback temperature control loop. View Details

The Thermal Expansion in Solids and Liquids set measures linear expansion of metals and glasses with a dilatometer and volume expansion of liquids with a pycnometer. View Details

The Type K Thermocouple measures temperature with nickel-chromium and nickel-alumel conductors, for continuous use up to around 1100 C. View Details

The Temperature Sensor gives an analog voltage linear with Celsius temperature, 10 mV per degree, from -40 to +125 C on a 2.7 to 5.5 V DC supply. View Details

The Tubular Heat Exchanger is a small concentric-tube trainer with a clear acrylic outer section and a stainless steel inner tube, used with the JLab Heat Exchange Service Unit. View Details

The Thermo Electric Heat Pump uses a Peltier device, a heater and a water-cooled heat exchanger to show heat being pumped across surfaces at rates up to 68 W. View Details

Typical Plant Chart: 58 x 90 cm wall chart printed in full colour on art paper, laminated on both sides, with plastic rollers. Simple construction; English only. View Details

Charts are printed on art paper in full color. Using the latest printing technology. View Details

Charts are printed on art paper in full color. Using the latest printing technology. View Details

Charts are printed on art paper in full color. Using the latest printing technology. View Details

Charts are printed on art paper in full color. Using the latest printing technology. View Details

Charts are printed on art paper in full color. Using the latest printing technology. View Details

Charts are printed on art paper in full color. Using the latest printing technology. View Details

Charts are printed on art paper in full color. Using the latest printing technology. View Details

Charts are printed on art paper in full color. Using the latest printing technology. View Details

Charts are printed on art paper in full color. Using the latest printing technology. View Details

The Tap Reseater Cutter re-cuts the worn valve seat inside a water tap so a new washer can seal again, and comes with 2 double bush sets, 2 cones and 4 cutters. View Details

The Trimming Knife has a 6 in die cast aluminium handle with blade storage, a three-position retractable blade and an interlocking nose, and comes with 3 heavy duty blades. View Details

This Torque Wrench has a 1/2 inch square drive and a 10-150 ft-lb capacity for tightening engine and wheel fasteners to a set figure. View Details

This test rig loads a two cylinder four stroke diesel engine by alternator, brake, hydraulic or eddy current dynamometer and also measures jacket heat. View Details

This test rig runs a three cylinder four stroke petrol engine on a dynamometer for Morse test and heat balance work, with water and calorimeter flowmeters. View Details

The Tensile Strength Tester pulls cement mortar briquettes apart with a double lever loaded by lead shot, up to 5 kN, to find their tensile strength. View Details

Replaces litmus paper as a method of determining acidity, neutrality, or basicity of a solution. View Details

Holds up to 25 thermometers in the correct vertical position to prevent mercury separation which may occur when thermometers are stored improperly. View Details

Protect expensive thermometers and make them more easily readable. The molded polypropylene holder clips onto the edge of a beaker or other vessel to hold a thermometer vertically near the side of the container. View Details

Convenient and practical, this sturdy aluminum thermometer stand features stove enamel finish and rugged construction. View Details

Unique beakers offer a flat bottom surface which accepts and keeps stir bars centered. View Details

Test the genetically determined taste response of students and families. View Details

Automatic pocket tape measure, 5/16 in wide, marked 60 in on one side and 150 cm on the other; locks in position, lies flat and retracts at the touch of a button. View Details

The Tripod Magnifier holds two bi-convex lenses at 10x on a black aluminum tripod, leaving both hands free while an object is examined. View Details

The Two-Way Microscope magnifies a specimen 2X and shows it in top and bottom view, with a top lens for items too large for the stage. View Details

The Triple Folding Pocket Magnifier has three 5X lenses of 22 mm diameter that give 5X, 10X or 15X when used alone or together. View Details

The Tri-Lens Hand Magnifier is a plastic student magnifier that offers 2X, 6X and 8X magnification with a 25 mm lens diameter. View Details

Includes 20 units, 10 rods and 1 flat. Bright orange. View Details

57 clear plastic square tiles printed in black: 50 number tiles (five each of 0 to 9) and 7 operation tiles, for operation tasks, probability and number games. View Details

Really understand the use and importance of tangrams and pentominoes in the classroom. View Details

Improve thinking skills, develop number sense, and build a foundation for success in algebra by playing this exciting and engaging board game. View Details

A trigonometric function generator that provides a hands-on approach to the teaching of trigonometry. View Details

Perfect for holding the Question Quest game board during classroom play. View Details

Each chart measures 8 x 8. Includes 1 each of X-Y axis with 144-block grid and bold X and Y axis, polar coordinate grid with six concentric circles View Details

High Resolution Touch Screen LCD Color Graphical Display Supports USB Pen Drive To Store / Retrieve MASS Spectral Data. View Details

Comprises a row of three indicator lamps, red, amber and green each provided with its own independent input socket. View Details

Brass-invar control. For operation on gas supply, with adjustable screw valve and riffled connections for gas supply and burner. View Details

A machine-tool dynamometer is a multi-component dynamometer that is used to measure forces during the use of the machine tool. View Details

The Thermal Conductivity of Liquid apparatus measures the conductivity of a liquid layer by the guarded hot plate method, with ring and top guard heaters stopping heat losses. View Details

This apparatus measures the Thermal Conductivity of Insulating Slabs by the guarded hot plate method, with two equal slabs between a main heater and water-cooled plates. View Details

The Thermocouple Calibration Test Rig calibrates a thermocouple from 0 C to 100 C at the ice and boiling points of water, with its emf read on a digital mV meter. View Details

The Two Stage Air Compressor Test Rig measures the volumetric and isothermal efficiency of a double-cylinder two-stage compressor, with pressure gauges after each stage. View Details

The Three Hinged Arch Apparatus is a 100 cm span mild steel arch with a crown hinge and roller end, used to calculate and measure horizontal thrust. View Details

The Two Hinged Arch Apparatus is a 100 cm span mild steel arch with a sliding hinged end and lever, used to measure horizontal thrust and its influence line. View Details

The Torsion of Rods Apparatus twists a metallic rod in a torsion testing machine, with a twist meter for the angle, so students can find its modulus of rigidity. View Details

This tilt, telescopic and collapsible steering system demonstrates three steering column functions on actual parts mounted on a square iron pipe frame. View Details

The Transaxle Gear Box with Differential model shows a four-forward, one-reverse gearbox and its differential in one unit, assembled from actual parts on a pipe frame. View Details

The Transfer Case Assembly Actual Cut Section shows how a four-wheel-drive transfer case is built, using actual parts assembled on a square iron pipe frame. View Details
The Turbo Charger is an actual cut section on an iron base that lets students study how an exhaust-driven turbine powers the intake compressor. View Details

The Tractor Actual Cut Section is a motorised, dissectible model of an actual tractor with sectioned parts on an iron frame, supplied with a key card and literature. View Details

The Tractor Differential Gear Assembly is an actual cut section that shows the working of a tractor differential with real parts on a square iron pipe frame. View Details

Provides Dual Sine waveform output of 125 Hz & 200 Hz with variable Amplitude. Sampling Frequency generation TTL output of 40 KHz. View Details

Provides Sine waveform output of 250Hz, 500Hz, 1 KHz, and 2 KHz. With Amplitude adjustments of 0 - 5Vp-p. View Details

Provides Sine waveform output of 500Hz, 1 KHz with Amplitude adjustments of 0 - 5Vp-p. View Details

2 Channel Time Division demultiplexed Pulse Code Modulation Receiver. Mode of Operation Fast (240 KHz/Channel approx) & Slow (1Hz. /channel approx.) View Details

Thermocouple trainer kit with a K-type thermocouple for temperature measurement up to 100 degrees Celsius and an on-board 4 1/2-digit digital panel meter. View Details

Study of 4 different temperature transducers - NTC thermistors, RTD Platinum, K(Cr-Al) thermocouples, IC temperature sensors. View Details

PID temperature process control trainer with a digital indicating controller and a Pt100 RTD temperature sensor. View Details

Microcontroller based stored program control having Memory of 72KB Program memory & 1KB Data RAM memory. View Details

Transformer trainer with two 1-phase and one 3-phase 500 VA transformers, Variac, lamp load and multifunction meter panels in a 40 x 40 mm aluminium profile rack. By JLab. View Details

Two-hinged arch apparatus for horizontal-thrust experiments in the structures laboratory. View Details
Three-phase 3 kVA, 440/230 V, 50 Hz delta-star shell-type transformer with copper windings and 50% and 86.6% secondary tappings. View Details

Mars set-up for the no-load and blocked-rotor tests on a three-phase induction motor, with panel meters, DOL starter and a 3 HP motor with loading arrangement; supplied by JLab. View Details
Mars-made thyristor/IGBT AC drive setup for starting and controlling an AC motor, with digital voltmeter, ammeter and RPM meter in a portable wooden panel box. View Details

It finds application at analog electronics lab depending upon the requirements of different clients. View Details

It finds application in analog electronics lab as per the requirements of our patrons. It is fabricated using premium quality raw material. View Details

It is used in scientific industry to cater to the diverse requirements of our clients. This transmitter is made up of supreme quality raw material and ultra modern machinery at our unit in adherence with the industrial set standards and norms. View Details

This Triple Output, 80W Power Supply is a programmable linear DC supply whose three outputs share 80 W and can change value automatically over time. View Details

This True RMS General Purpose Clamp Meter reads sine-wave and distorted currents through its jaw and adds a diode test and peak hold. View Details

Transistor analyzer by JLab for static tests and curve tracing of NPN and PNP transistors, with on-board micro-ammeter, DC power supply and curve tracer circuit. View Details
Set of 2 color land form models Each includes and overlay representing ancient mountain. View Details
A 64-page reproducible activity book on making change, identifying money and learning coin equivalencies. View Details
Triangle-based card game in which children use the relationship between multiplication and division to complete number families on a triangle board. View Details
Triangle-board card game for 2-4 players that builds addition and subtraction fact families; includes a triangle game board, 100 cards (facts up to 20) and 4 trays. View Details
Introduce and engage children in composing 2-D shapes. All pieces are relational and translucent. View Details
.jpg)
Digital top loading balance with 1200 g capacity, 0.1 g readability, a 133 x 170 mm pan and a backlit LCD, supplied with AC adapter and manual. View Details

Set of 21 nickel-plated steel test weights from 1 mg to 200 g, with forceps, packed in a stainless steel box for checking laboratory balances. View Details

Rimmed test tube in heat-proof borosilicate glass 5.1, 16 x 150 mm with a 1.0 mm wall, for everyday chemistry tests and gentle heating. View Details

Digital Type K thermocouple thermometer, model JL308: -40 to 1200 C, 1 C resolution, two inputs (T1, T2), LCD, 9 V battery, with probe and manual. View Details

Clear borosilicate glass thistle funnel, model JL345: 38 mm top, 7 mm stem, 350 mm overall, for adding liquid to a stoppered flask. View Details

Three-legged tripod stand with a cast iron top and zinc-coated mild steel legs, 100 x 150 mm, for heating beakers and flasks over a burner. View Details

Straight stainless steel laboratory tongs, 300 mm, with serrated tips for gripping crucibles, flasks, beakers and dishes; rust and corrosion resistant. View Details

Test tube cleaning brush with nylon bristles on a twisted GI wire stem, 250 mm overall, that removes residue without scratching the glass. View Details

Clear hard glass test tube, model JL458, resistant to heat and chemicals, for mixing and heating small quantities of reagents in the laboratory. View Details

Capacity :1000 gm Sensitivity / Accuracy: 0.5gm View Details

A high-class telescope for school students for all-around purpose. View Details

Wide Aperture Optics, Accurate and precise arrangement, Magnifying lens for reading, Rack and pinion View Details

The multi-purpose tool kit consisting of the following tools :- Long nose pliers, Diagonal cutting pliers View Details

Material: Wooden A test tube holder is used to hold test tubes. View Details

Laboratory tripod stand, 15 cm high, with a triangular cast iron top of 12.5 cm side and mild steel legs bent outwards for stability. View Details

Material: Borosilicate glass with rim Size: 15x150mm View Details

Material : Wooden A test tube holder is used to hold test tubes. View Details

Height x side of triangular 15x12.5cm Material: Cast iron top and miles steel legs painted. View Details

Plastic test tube stand with 6 holes (two for 25 mm and four for 16 mm tubes), 6 drying pegs and hemispherical base wells; autoclavable, by JLab. View Details

Material : Wooden A test tube holder is used to hold test tubes. View Details

General-purpose glass stirring thermometer, 300 mm long, reading -10 to 110 C in 1 degree divisions, for common laboratory work. View Details

Clear glass thin-walled capillary tube with a 0.5 mm bore, 500 mm long and resistant to heat and chemicals, cut to length for capillary work. View Details

White raw thread for the chemistry lab, used to tie a capillary tube to a thermometer for melting and boiling point determination. View Details

Laboratory tripod stand, 15 cm high with a 12.5 cm triangular cast iron top and outward-bent mild steel legs, for heating glassware. View Details

Transparent and protected transistor module 2N 2222 NPN View Details

Rimmed borosilicate glass test tubes, 15 x 150 mm, clear, heat and chemical resistant, for mixing and heating small samples. View Details

The brass plug and lugs are thoroughly interlaped for perfect locking. View Details

This resistance box is designed with multiple plugs for measuring the electrical values like voltage, current View Details

Autoclavable polypropylene trough, model JL 287/40, 180 x 60 mm, for storing, sterilising and drying labware; other sizes are also made. View Details

Stainless steel laboratory tongs, 30 cm long, silver finish, heat and chemical resistant, for handling hot crucibles and dishes. View Details

Clear borosilicate glass test tube with rim, 15 x 150 mm, heat and chemical resistant, for heating and small-scale reactions. View Details

Raw white thread for chemistry practicals, used to hang seed crystals and magnets and to tie covers over the mouths of glassware. View Details

Laboratory tripod stand with a triangular cast iron top, 15 cm high with a 12.5 cm side, on mild steel legs bent outwards for stability. View Details

Wooden test tube holder, model JL 179/25, for gripping a test tube while it is heated or when the glass is too hot to touch. View Details

Clear borosilicate thistle funnel, 300 mm long, model JL 199/29, heat and chemical resistant, used in gas preparation and osmosis experiments. View Details

Autoclavable plastic test tube rack, model JL 229/33, with six holes for 25 mm and 16 mm tubes, matching base wells and six drying pins. View Details

Rimmed borosilicate glass test tube, 15 x 150 mm, model JL 304/07, clear, heat and chemical resistant. View Details

Autoclavable plastic test tube rack with 6 holes (two 25 mm, four 16 mm), base wells and 6 drying pegs. View Details

Wooden test tube holder, model JL 308/09, for gripping a test tube while it is heated or when it is too hot to touch. View Details

Laboratory tripod stand, model JL 315/12, 15 cm high, with a 12.5 cm triangular cast iron top and painted mild steel legs bent outwards. View Details

Alcohol stirring thermometer, model JL 196/42, 300 mm long, range -10 to 110 C in 1 degree divisions, for general laboratory use. View Details

Stainless steel beaker tongs, 300 mm long, for lifting and moving hot beakers safely in the chemistry lab. View Details

Laboratory tripod stand, 15 cm high, with a 12.5 cm cast iron triangular top and painted mild steel legs bent outwards. View Details

Clear borosilicate glass test tube, 15 x 150 mm, with a rim; heat and chemical resistant for school chemistry practicals. View Details

Autoclavable plastic test tube stand with six places for 25 mm and 16 mm tubes, base wells and six vertical drying pins. View Details

General-purpose alcohol stirring thermometer, 300 mm long, range -10 to 110 C with 1 degree subdivisions, for school and laboratory temperature readings. View Details

Clear glass test tube with rim, 15 x 125 mm, 10 ml capacity, heat and chemical resistant, for small-scale chemistry tests and spot reactions. View Details

Raw white laboratory thread, model JL 125/39, for suspending seed crystals, hanging a pendulum bob and tying covers or labels on apparatus. View Details
Single-phase transformer lab, model JL108/02, with a 1 kVA transformer, auto transformer, meters, two wattmeters and a bulb load for polarity, ratio, open-circuit, short-circuit and load tests. View Details
AC voltage tester, model JL115/06, for 100 to 500 V mains checks, 3 x 75 mm in size, made of plastic and metal in a silver finish. View Details
Tool box JL199/030 with 60-80 hand tools: 8-inch pliers, flat and star screwdrivers, hammers, neon and digital voltage testers, hacksaw, files and chisels. View Details
Clear borosilicate glass test tubes, 16 x 150 mm, chemical resistant, for holding, mixing and observing small amounts of chemicals. View Details
Graduated mercury-in-glass thermometer with a transparent glass stem, for general laboratory temperature measurement. View Details
Plain white paper ticker tape roll, 10 mm x 200 m, for use with ticker timers in speed and acceleration experiments. View Details
Adjustable aluminium alloy tripod stand with a photographic ball head, paint coated, for holding a camera steady when recording experiments. View Details
White nylon fibre test tube brush for cleaning test tubes in the laboratory. Made by JLab in Ambala, India. View Details
Translucent 600 ml polyethylene bottle with a trigger sprayer for spraying water or cleaning solution in the laboratory. View Details
Graduated glass thermometer filled with red spirit, enclosed scale type, with a prismatic measuring capillary and an eyelet. View Details
Rimmed borosilicate glass test tubes, 15 x 125 mm, model JL239/038, clear, heat and chemical resistant, for biology practicals. View Details
Wooden test tube holder, model JL339/68, 200 mm long with a 20-25 mm maximum opening, for gripping test tubes during heating. View Details
White plastic test tube stand, model JL341/69, autoclavable, for holding 25 mm test tubes upright during practicals. View Details
Pen-type digital thermometer, model JL345/071, for body temperature readings from 32 to 42.9 C on a 4-digit LCD, with a 1 minute measurement time. View Details
Thistle funnel in neutral glass, model JL347/072, heat and chemical resistant, for gas preparation and osmosis set-ups. View Details
6 inch laboratory tripod stand, model JL349/073, with a triangular mild steel wire top and outward-bent legs ending in plastic caps. View Details
TS Root Tip Onion prepared slide (model JL470/0149), a transverse section through the onion root tip, on borosilicate glass in a white box. View Details
TS Of Dicot Stem prepared slide (model JL471/0150), a transverse section of a dicotyledon stem, on borosilicate glass in a white plastic box. View Details
TS Of Dicot Root prepared slide (model JL472/0151), a transverse section of a dicotyledon root, on borosilicate glass in a white plastic box. View Details
Prepared microscope slide with a transverse section of a monocot stem on clear borosilicate glass, model JL473/0152, in a white plastic box. View Details
Prepared slide of a monocot root in transverse section, model JL475/0153, on clear borosilicate glass and stored in a white plastic box. View Details
Prepared microscope slide of a dicot leaf in transverse section, model JL476/0154, on clear borosilicate glass in a white plastic box. View Details
Prepared slide of a monocot leaf in transverse section, model JL477/0155, on clear borosilicate glass and kept in a white plastic box. View Details
Prepared slide of a transverse section of cartilage for studying chondrocytes in lacunae, model JL444/0168, on clear borosilicate glass in a white box. View Details
Permanent slide of bone tissue in transverse section for studying Haversian canals, lamellae and lacunae, model JL446/0169, in a white plastic box. View Details
Transverse section of a mammalian testis for studying seminiferous tubules and the stages of sperm formation, model JL448/0171, on borosilicate glass. View Details
Transverse section of a mammalian ovary for identifying follicles at different stages, model JL449/0172, on clear borosilicate glass in a white box. View Details
Section of an embryo at the blastula stage, a hollow ball of cells around the blastocoel, model JL451/0174, on clear borosilicate glass. View Details
Section of the morula, the solid ball of blastomeres formed by cleavage of a fertilised egg, model JL452/0175, on clear borosilicate glass. View Details
Laminated polyart wall chart on types of joints, model JL496/0220, 75 x 100 cm, from fixed skull sutures to ball and socket joints. View Details
Laminated polyart chart of transverse sections of a monocot root, stem and leaf, model JL501/0223, 75 x 100 cm, for plant anatomy. View Details
Laminated polyart chart of transverse sections of a dicot stem, root and leaf, model JL503/0224, 75 x 100 cm, for anatomy practicals. View Details
This plain white cotton towel, model JL557/028, is machine washable and is used for drying hands in the laboratory. View Details
This laboratory-grade glass thermometer, model JL600/048, has a graduated scale for direct reading and comes with a case. View Details
This laboratory tripod, model JL611/053, has a triangular mild steel wire top, outward-bent legs for stability and plastic caps on the leg ends. View Details
This white Polylab test tube stand is made of autoclavable plastic and holds 6 test tubes upright in school laboratories. View Details
This test tube holder of chrome plated flat steel wire has a thumb sliding device and a polished wooden handle, and it holds test tubes that are hot or being heated. View Details
This round test tube brush has soft white nylon bristles and is used to clean the inside of test tubes in the laboratory. View Details
This rimmed, round-bottom borosilicate glass test tube measures 15 x 125 mm and is used for small-scale reactions and heating tests. View Details
This thistle funnel of clear, heat and chemical resistant glass is used to add liquid to a stoppered flask during gas preparation. View Details
This 500 ml bottle of Tertiary Butyl Alcohol provides the tertiary alcohol for the Lucas and dichromate tests that tell alcohol classes apart. View Details
Tollens Reagent in this 500 ml bottle is ammoniacal silver nitrate, which deposits a silver mirror with aldehydes but not with ketones. View Details
Toluene in this 500 ml analytical reagent bottle is methylbenzene, a solvent whose side chain hot alkaline permanganate oxidises to benzoate. View Details
Travelling microscope JL278/037 with stainless steel vertical and horizontal scales, 0.01 mm verniers, Ramsden cross-line eyepiece and wooden case. View Details
Graduated glass laboratory thermometer, model JL286/041, for reading the temperature of water baths, mixtures and heated liquids in physics practicals. View Details
Set of 8 chrome-plated steel tuning forks from 256 Hz to 512 Hz, packed in a pouch, model JL294/045, for sonometer and resonance tube practicals. View Details
6 in laboratory tripod stand with a triangular mild steel wire top, legs bent outwards and plastic caps on the feet, for heating glassware over a burner. View Details
Two way plug key with brass blocks carrying 4 mm terminals on a moulded plastic base and two tapered brass plugs with fluted plastic tops. View Details
Tool kit for electrical work, model JL461/126, with a plier, a screwdriver, a drill machine and other essential tools for lab and workshop jobs. View Details
Electronic timer with two infrared photogates, cords and AC adaptor; internal and external modes, 0.1 ms time resolution and 82 mm barrier spacing. View Details
This teaching transformer has interchangeable coils of 200, 800 and 400 turns and one 240 V, 50 Hz mains coil for turns-ratio experiments. View Details
This surface tension kit has nickel-plated steel wire frames, a thin steel pendant ring, a plastic cuvette and a tubular dynamometer reading to 0.1 N. View Details
This 20 x 180 mm test tube is made of clear, heat resistant borosilicate glass for heating and mixing reagents. View Details
This 15 x 160 mm test tube in clear borosilicate glass is used for small-scale tests and resists heat and chemicals. View Details
This medium test tube brush measures 240 mm x 13 mm and has soft, round white nylon bristles for cleaning test tubes. View Details
This 270 mm x 15 mm test tube brush has soft white nylon bristles on a round head for cleaning larger test tubes. View Details
This plastic test tube stand has 12 holes for 16 mm tubes and holds a set of test tubes upright on the bench. View Details
This 12-hole plastic test tube stand has 23 mm holes to hold wider test tubes upright and resists chemicals. View Details
This test tube holder grips tubes of 15 to 25 mm in chrome-plated steel wire with a sliding collar and a polished wooden handle. View Details
These 16 cm straight tweezers are made of chemical resistant stainless steel and pick up small items in the chemistry lab without bare fingers. View Details
This Temperature and Humidity Data Logger records -30 to 50 C and 0 to 100% RH for at least 12 hours and can output its data in spreadsheet form. View Details
The Complete A/C Diagnostic Tool calculates superheat, subcool, target superheat, temperature split, humidity and airflow for air-conditioning systems. View Details
The Thermal Imaging With Visible Camera maps surface temperature from -20 to 350 C as an infrared image, adds a 640 x 480 visual camera and stores images on a micro SD card. View Details
Thermostats 1 controls the refrigeration compartment of a single-door direct-cool refrigerator between -5 and 10 C. View Details
Thermostats 2 is used in bottle coolers to hold beverage storage between 2 and 10 C, with a maximum setting of 10.5 C. View Details
Thermostats 3 controls a freezing compartment between -23 and -10 C through an adjustable dial and also suits fridges and display cabinets. View Details
This Transparent Vinyl Tube For Condensate Pumps is a clear, round 6/9 size tube used as the discharge line from a condensate pump. View Details
This clear, round vinyl tube in the 10/14 size carries water from a condensate pump outlet to the drain. View Details
This heavy-duty Tube Cutter cuts copper, aluminium, thin stainless steel and PVC tube from 6 to 42 mm outside diameter and has an aluminium body. View Details
This mini Tube Cutter cuts copper tube of 3 to 16 mm outside diameter and has a compact aluminium body for work in tight spaces. View Details
The Tube Expander swages the ends of 6, 8, 10, 12, 18 and 22 mm OD copper tube so that another tube of the same size can be brazed into them. View Details
The Torx Set covers seven six-lobe (hexalobular) star drive sizes from T8 to T30 for screws with a star-shaped recess. View Details
The Torx Set has seven six-lobe star drive tools in sizes T8, T10, T15, T20, T25, T27 and T30 for screws with a star recess. View Details
This 5 m Tape Measure locks at any length and has a magnetic tip and a finger stop, for bench, room and site measurement in the workshop. View Details
This workshop Trolley carries tools on plastic shelves with aluminium uprights and has a lockable steel drawer and lockable swivel castors. View Details
This copper Tee Fitting is used to make brazed branch joints in refrigeration and AC lines, and comes in 6, 8, 10, 12 and 14 mm sizes. View Details
This brass Tee Fitting with male ends is used to branch flare-jointed refrigeration lines, and comes in 1/4, 5/16, 3/8, 1/2 and 9/16 inch sizes. View Details
Teflon is a roll of PTFE thread seal tape, 1/2 in wide and 236 in long, that is wound onto male pipe threads to seal them before a fitting is screwed on. View Details
This Tin Lead Solder is a 0.8 mm rosin-core wire, 50 g in weight, used with a soldering iron for wire joints and light sheet work. View Details
Heavy-wall borosilicate glass thistle funnel with a conical head, light and autoclavable, for adding liquid to a flask during gas preparation. View Details
Tripod stand, model JL389, with a triangular cast-iron top and painted steel legs bent outwards, for holding vessels over a burner. View Details
Stainless steel tongs, 150 mm, with a bow and corrugated jaws, for handling hot crucibles and other porcelain in the chemistry lab. View Details
Borosilicate glass test tube of 10 ml with an interchangeable stopper, model JL151; the tube and stopper are autoclavable. View Details
Alcohol-filled glass laboratory thermometer, model JL284, with a range of 0 to +150 C, for school and college science work. View Details

The Two-Stage Compressor is a two-cylinder air compressor with 3 kW power consumption, 250 L/min intake capacity and 220 L/min free air delivery. View Details

Life-size, gender-neutral anatomical torso displaying complete internal organ systems. View Details
.jpg)
Dual-channel TENS device (model JL205) with normal, burst and modulation modes and adjustable pulse width, frequency, intensity and timer. View Details

This set of eight aluminium-alloy tuning forks runs from 256 Hz to 512 Hz in one octave and comes packed in a wooden box. View Details

This travelling microscope reads small lengths to 0.01 mm on vertical and horizontal vernier scales and has rack and pinion focusing and two slow-motion knobs. View Details

Tester Input Plugs is a digital tester that measures AC/DC voltage, AC/DC current, resistance and capacitance through cables fitted to its input plugs. View Details

This Tuning Forks Pair with Resonator shows sound production, resonance, interference and conduction, with a resonance box that makes the note louder. View Details

This Triangular Prism, 5 cm high, refracts and disperses white light into a spectrum for lessons on refraction and the deviation of light. View Details

This Thermometer (with no Mercury) has a slim glass stem and a scale from -10 to 120 degrees C for measuring the temperature of liquids. View Details

This Tube with Stopper is a 15 x 100 mm tube in high-transparency plastic, closed by a stopper and used for disposable sample handling and storage in the laboratory. View Details

This three-legged metal tripod stand holds and raises beakers, flasks and dishes above a burner so they stay steady during heating. View Details

This teaching set pairs a trinocular microscope with an HDMI camera and a flat screen, and adds slides, cover slips and a box for 100 slides. View Details

These teaching boards are washable 50 x 67 cm charts, laminated on both sides, on human body systems and reproductive health, each with two hanging loops. View Details

12-place plastic test tube stand with tiers that hold tubes upright at different heights, a wide footed base and smooth, easy-to-clean surfaces. View Details

Sensor-operated automatic trash-bin model View Details

Tinkering lab installation combining robotics, electronics, coding, IoT, AI, 3D printing, drones, astronomy, VR and DIY project areas in one room. View Details

Science and mathematics teaching set with lab glassware, physics and solar-system models, electricity kits, geometry tools and fraction aids. View Details















































































