You have searched for products starting with "C"

Polypropylene carboys, much lighter than glass, autoclavable and durable, with wide handles for carrying and pouring; 10 and 20 litres. View Details

These polypropylene Carboys are autoclavable dependable & durable. These are also equipped with a leak proof spigot screwed to the body. View Details

Conical-bottom centrifuge tubes moulded in clear, strong polypropylene, in 15 ml and 50 ml sizes. View Details

These connectors add to the existing range of connectors. The crest & valley structure provided at all the ends of the connectors give excellent leakproof grip to the tube. View Details

Four-way cross connectors for leak-proof joints in tubing connections, made in 6 mm, 8 mm and 10 mm sizes by JLab. View Details

Adding to the existing range of cryo vials is this vial which has internal thread in it. The cap fitted with an O-ring screw into the vial and makes it a leak proof Cryo Vial. View Details

Sterilized cryo vials for storing biological material, including human and animal cells, with white graduations, a long marking area and a sealed cap; 1.0, 1.8 and 4.5 ml. View Details

Cryo coders in different colours that fit easily into the cap of cryo vials, for colour identification of different samples. View Details

Autoclavable polycarbonate cryo rack with 50 places for 1, 1.8 and 4.5 ml cryo vials; each vial locks in its well, so it can be unscrewed without being lifted. View Details

Moulded in polypropylene, the top of the box is attached to the bottom through well designed built-in hinges. The bottom has built-in spaces to hold vials up to 2ml capacity. View Details

These Crystal Model Sets contain different coloured jacks ( Red, Black & White ) and connectors ( long & short ) in a prescribed number to be joined together in an illustrated way to form structures like diamond, Graphite & Sodium Chloride. View Details

Made of Polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. View Details

These Conical Measures are very good for measuring small quantities of reagent. Moulded in Polypropylene, these autoclavable Measures have a hexagonal base which provides it excellent stability. View Details

Life-size PVC cervical vertebral column on a stand: occipital plate, 7 cervical vertebrae with discs, cervical nerves, vertebral arteries, spinal cord and a herniated disc. View Details

Enlarged sectioned heart with a blood circulation diagram: the flexible heart wall beats, the valves open and close, and lights show arteries in red and veins in blue. Needs a power supply. View Details

Cranial nerve skull model, 9 cm in size, dissectible into 39 pieces. View Details

Clearly depicting the different levels of cholesterol, these products are used in varied educational institutions to educate medical students. View Details

Teaching chart on clot formation in an artery - how a blood clot (thrombus) forms inside an arterial vessel - by JLab. View Details

This Cervical Spine Model shows brain stem, occipital bone, atlas & axis through C7, with herniated disc, T1 & T3. This model has a soft cerebellum, full nerve with right side brachial plexus. View Details

Colon model set of four pieces for teaching the anatomy of the human large intestine, made by JLab. View Details

Model of the large intestine showing basic anatomy and common conditions, including colitis, diverticulitis, polyps and cancer, with a patient education card and removable stand. View Details

To teach, demonstrate and learn Motion in a fun way. The kit consists of Flying Pig, Centripetal Force Kit, SpillNot and a Stopwatch. Circular motion in a horizontal plane, circular motion at an angle, Centripetal force etc can be taught with ease. View Details

Copper Electrode: For use with Student Cells or in various other chemical or electricity experiments. View Details

View Details

Aluminium Construction, consists of a inner calorimeter 2.85 inch(72 mm) ht x 2.39 inch(61 mm) dia. and an outer vessel 4 inch(100 mm) ht x 4.125 inch(115 mm) dia. View Details

To demonstrate unequal expansion of different metals when heated equally. Consists of two strips, brass and steel riveted together from end to end fitted to a wooden handle. Upon heating, the bar curls and bends because the riveted strips each have a di View Details

It consists of a bi-metallic strip mounted on a wooden handle. Bimetal is an alloy of two metals which when heated bend in a particular direction depending upon the metals used, because of different co-efficient of expansion. View Details

To demonstrate unequal expansion of different metals when heated equally. Consists of two strips, copper and brass riveted together, fitted to a wooden handle. View Details

To demonstrate unequal expansion of different metals when heated equally. Consists of two strips, Copper and Brass riveted together from end to end fitted to a wooden handle. Upon heating, the bar curls and bends because the riveted strips each have a d View Details

To demonstrate unequal expansion of different metals when heated equally. Consists of two strips, copper and iron riveted together, fitted to a wooden handle. View Details

To demonstrate unequal expansion of different metals when heated equally. Consists of two strips of different metals, riveted together, fitted to a wooden handle. View Details

This educational kit contains materials and instructions suitable for safe hands-on inquiry-based experimentation into the nature and properties of heat and temperature. View Details

Teacher Version. This educational kit contains materials and instructions suitable for safe hands-on inquiry-based experimentation into the nature and properties of heat and temperature. View Details

To demonstrate the difference in thermal conductivity of different metals. Consists of five metal rods stainless steel, brass, copper, iron and aluminium connected to a center metal, brass, hub which is mounted on a rod with wooden handle. View Details

Invented by William Crooke in the 1860's. It demonstrates the conversion of light energy into mechanical energy. The vanes in the evacuated glass bulb are Black and White in colour. View Details

Crooke's Radiometer was invented by William Crooke in the 1860's. It demonstrates the conversion of light energy into mechanical energy. View Details

The Coaxial Binocular Microscope has an aluminium die-cast frame, a 45-degree rotating binocular head, a ball-bearing quadruple nosepiece and coaxial focusing with a slide protection lock. View Details

Consists of four different inner diameters capillary tubes connected by a common tube to a reservoir. Complete apparatus mounted on a strong plastic base. View Details

This educational kit contains materials and instructions suitable for safe hands-on inquiry-based experimentation into the nature and properties of air pressure. View Details

To study and demonstrate working of a compass and magnetic effects. Consists of a 140 mm long magnetic needle with North Pole colored red and South Pole colored White. Mounted on a stable base 100 mm high. View Details

Plastic body extra large Compass 3.5 Inch (90mm) diameter, with a clear plastic top. Dial graduated in degrees with 8 marked points. Measurements are approximate. View Details

This educational kit contains materials and instructions suitable for safe hands-on inquiry-based experimentation into the nature and properties of magnets and electromagnetism. View Details

This educational kit contains materials and instructions suitable for safe hands-on inquiry-based experimentation into the nature and properties of magnets and electromagnetism. View Details

Clamp-on meter that measures AC current up to 500 A by induction in a coil without breaking the circuit, and AC voltage up to 500 V; DC and resistance are measured with leads. View Details

View Details

To study effect of Positive & Negative Clipping & Clamping on Sine Wave. View Details

Trainer to study the frequency and wave shape generated by a Colpitts oscillator, with DC power supply, printed circuit diagram and components on the front panel. View Details

Spot-welded steel wire stand that holds 6 crucibles in 1.3 inch (33.25 mm) openings; 5 x 3.5 x 2 inch (127 x 89 x 50 mm). View Details

Spot-welded steel wire stand with eight 1.3 inch (33.25 mm) crucible openings; 6.5 x 3.5 x 2 inch (165 x 89 x 50 mm). View Details

High form porcelain crucibles with lids in 10, 15, 30, 50 and 100 ml capacities, with rim diameters from 30 to 63 mm. View Details

Low form porcelain crucibles with lids in 15, 30 and 50 ml capacities, with rim diameters of 43, 51 and 59 mm. View Details

Chemical-porcelain crucibles are glazed inside and out, except outside bottom and rim. Crucible covers are completely glazed except for rim. For use in temperatures up to 1150 C (2102 F). View Details

Chemical porcelain crucibles are glazed inside and out, except outside bottom and rim. Crucible covers are completely glazed except for rim. For use in temperatures up to 1150 C (2102 F). View Details

Porcelain spot plate with 12 depressions, glazed on top and sides, about 115 x 90 mm, for drop-scale spot tests. View Details

Pipe clay triangle with 2 inch (50 mm) sides, made of clay pipes on steel wire, for supporting a crucible on a tripod over a flame. View Details

Power Electronic Training Board has been designed specifically to study Current Transformer (C.T.). View Details

To study the charging of a condenser, to plot a graph of voltage (V) across it against time (t) and to determine the time constant from this graph. View Details

To determine the resistance of a Galvanometer by half deflection method. To determine the figure of merit of the Galvanometer. To convert the Galvanometer into an Ammeter of a given range and to calibrate it. View Details

The Cloud and Pour Point Apparatus is a stainless steel cooling bath with glass jar, jacket and disc for finding the cloud and pour points of petroleum oils. View Details

Chromatography Columns with Sintered Disc are columns whose sintered disc supports the packing, made with 10 to 40 mm sinters in lengths of 100 to 500 mm. View Details

Condensers Air are jacketless glass air condensers, made in seven sizes from 100 mm with B10 joints to 550 mm with B24 or B29 joints. View Details

Condensers Allihn are water-cooled bulb condensers for reflux, made with B19 to B50 cones at 200 mm effective length or B24 joints at 300 mm. View Details

Condensers Coil Graham are water-cooled coil condensers for vertical use, offered in ten joint options from B19 to B50 with 150 to 300 mm effective length. View Details

Condensers Double Surface Davies are water-cooled condensers with an inner and an outer cooling surface, in 150 and 200 mm lengths with B14 to B29 joints. View Details

Condensers Jacketed Coil are water-cooled coil condensers in an outer jacket, giving 430 sq cm of cooling surface in a 150 mm effective length. View Details

Condensers, Liebig are straight water-cooled condensers for distillation and reflux, made in 60, 150, 200 and 400 mm effective lengths with B10 to B29 joints. View Details

Coplin Jars are soda-lime glass staining jars that hold 5 microscope slides upright, or 10 back-to-back, in about 60 ml of stain. View Details

The Cylindrical Funnels, Plain Stem JLab is a straight-bodied dropping and separating funnel made in 25 to 500 ml sizes with a B14 or B19 top socket. View Details

The Cylindrical Funnels, Stem with Cone JLab is a straight-bodied dropping funnel of 20 to 500 ml with a matching top socket and stem cone in B10, B14 or B19. View Details

This Cap Fittings range brings together C caps, connectors, and rings and washers, so a worn or missing part of a cap joint can be ordered on its own. View Details

Beam with notches graduated for rider use with zero at centre Six point arrestment. The beam is raised for working. View Details

Set of four cones, each cut a different way to reveal a conic section (circle, ellipse, parabola, hyperbola), with four reproducible worksheets on the properties of conics. View Details

Abacus with 100 beads for children aged three and up, used to teach counting, addition and subtraction, and also multiplication, division, fractions and square and cube roots. View Details

Open cross staff: metal head with four arms and two pairs of vertical sights at right angles, in gun metal, brass or a non-rusting alloy, on a wooden pole. View Details

Wooden cylinder cut into painted pieces, for children's play and for building different shapes, helping them understand shapes better. View Details

4000 to 5000 r.p.m. with speed regulator and plug & cord. View Details

Crash Cart made of Best quality heavy gauge tubular pipe and metal sheet construction. The unit moves on the four castors in which two are with break and two are without breaks. View Details

Made up of CRCA pipes mounted. Pretreated and epoxy powder coated. View Details

Electrically operated, dome type, sturdy, stable heavy body with resiliently mounted motor working on 220V AC 50 Hz single phase for vibration View Details

Microprocessor Based Water Proofing Floats on Water View Details

Stainless steel jar on stand. Capacity:- 500 ml, 1 lit. and 2 lit. View Details

Stroke type machine. Filling capacity adjustable 5gm to 50gm. View Details

A compact hand operated machine suitable to fill two-part hard gelatine capsules no. 0, 1 & 2 by interchangeable plates. View Details
Made from Borosilicate Glass:- Arterial Venous View Details

Floor Area:- 200 cm2 (31 in.2) Chamber Volume:- 2600 cm3 (159 in.3) View Details

Thermo reactor for Determination of Chemical Oxygen Demand in Various Substances. Chemical Oxygen Demand (COD) View Details

Cryostat microtome of brass and stainless steel in a stainless steel cold chamber with a built-in rapid freeze stage; feed range 0-40 microns in 2-micron steps. View Details
We are manufacturers of finest Compass Aesthesiometer in India and also supplies and exporters Compass Aesthesiometer around the world at best prices. View Details

Cold room has total body with heavy sturdy angle iron & channels outer body is made of MS sheet duly painted. View Details

Cadaverous Injector is used for injecting Formaldehyde solution in cadaverous at much higher speed than normal gravity process. View Details

Composition of water by weight wall chart, 58 x 90 cm, printed in full colour on art paper, laminated on both sides and fitted with black rollers. View Details

Cement and concrete wall chart, 58 x 90 cm, printed in full colour on art paper, laminated on both sides and fitted with plastic rollers. English only. View Details

Copper metallurgy wall chart, 58 x 90 cm, printed in full colour on art paper, laminated on both sides and fitted with plastic rollers. English only. View Details

Crystal lattices wall chart, 58 x 90 cm, printed in full colour on art paper, laminated on both sides and fitted with plastic rollers. English only. View Details

Close packed structures wall chart, 58 x 90 cm, printed in full colour on art paper, laminated on both sides and fitted with plastic rollers. English only. View Details

Laminated on both sides with thick plastic film Fitted with plastic rollers Available in English language only View Details

Laminated on both sides with thick plastic film Fitted with plastic rollers Available in English language only View Details

Charts are printed on art paper in full colour Laminated on both sides with thick plastic film Fitted with plastic rollers View Details

Charts are printed on art paper in full colour Laminated on both sides with thick plastic film Fitted with plastic rollers View Details

Printed in full color, laminated on both sides with thick plastic film and fitted with plastic rollers. View Details

Chart showing the classification of carbohydrates as simple and complex, their functions in the body and various foods rich in carbohydrates. View Details

Laminated with thick plastic film on both sides. Fitted with superior plastic rollers. View Details

Laminated with thick plastic film on both sides. Fitted with superior plastic rollers View Details

Laminated with thick plastic film on both sides. Fitted with superior plastic rollers View Details

Laminated with thick plastic film on both sides. Fitted with superior plastic rollers View Details

Depicts the Causes, Symptoms, Treatments, care to be taken. Laminated with thick plastic film on both sides View Details

Depicts the Causes, Symptoms, Treatments, care to be taken. Laminated with thick plastic film on both sides View Details

Showing different figures and diagrams made by Sea Water. Printed in multicolour on 80 gsm map litho paper. View Details

The Cross Staff is used in field survey to set out right angles from a survey line and fix the direction of offsets. View Details

The Copper Dial Compass is a carved copper compass whose design is inspired by ship navigational compasses, made to be kept on display. View Details

The Condenser Lens Compass is a 3 inch magnetic compass fitted with a condenser lens. View Details

The Condenser Lens Wheel Compass is a varnished magnetic compass with a condenser lens and wheel design, used on boats, hiking trips and sailing. View Details

This Crushing Value Apparatus measures the resistance of aggregate to crushing with a case hardened steel cylinder, base plate, plunger and tamping rod. View Details

These Cube Moulds cast specimens for compressive strength tests in 50, 70.6, 75, 100 and 150 mm sizes, in cast iron or mild steel. View Details

This Compaction Mould holds 1000 ml of soil, 100 mm across and 127.3 mm high, for finding the moisture-density relation in the Proctor test. View Details

This Concrete Vibrator compacts fresh concrete with a 25, 40, 50 or 60 mm needle on a 4 m or 6 m flexible shaft driven by a motor or engine. View Details

This Clinometer Compass takes magnetic bearings through handle-shaped peep sights and reads elevation or slope from a weighted arm on three scales. View Details

Virgin plastic counter allow for sorting, patterning, color recognition, counting and operations activity in Education centers, small groups or Individual student desk. View Details

Virgin plastic counter allow for sorting, patterning, color recognition, counting and operations activity in Education centers, small groups or Individual student desk. View Details

Plastic tiles, 1 inch x 1 inch and 2 mm thick, in 5 colours for building models of maths concepts; packaged in a clear storage container. View Details

We are offering Counting Abacus (Wooden) with 55 Beads. View Details

It has certain number of equally spaced Peg and arranged on two different circumference of a circle and one peg at the center. View Details

A very common task in math class is to plot and name points on what we call the co-ordinate board, more commonly known as a four-quadrant graph. View Details

Class room Base Ten manipulative to engage students in concrete demonstrations of place value and base ten concepts in Group activity. View Details

Cuisenaire strips are a collection of rectangular rods, each of a different color and size. View Details

Circle kit is provided with set of three circular disk having different radius. View Details

Set of 4 section models of a cone showing the circle, ellipse, parabola and hyperbola. View Details

Clinometer for measuring the angle of elevation or depression of an object, used to find the height and distance of a building; provided in a durable box. View Details

Offered come developed in 100% medical-grade silicone with the drain combining transparent silicone round tube and flat drain. View Details

Electronic controls enables for range of motion. Adjustable flexion angle from 0o to 110o. 0 to 30 minutes countdown timer. Patient safety switch to stop and reverse the motion. View Details

Carbon Di-Oxide Incubator suitable of carrying out different quality control tests under controlled conditions of temperature and humidity. View Details

Our system incorporates multiple Devices such as in line process Indicators, environment scanners and temperature or humidity controllers. View Details

COD Digester is the most accepted Thermoreactor for Determination of Chemical Oxygen Demand in Various Substances. View Details

Concave Lenses are highly polished and well edged Manufactured from plate Glass, optically true These lenses have negative focal lengths These lenses diverge collated incident light and form virtual images View Details

These lenses are converging lens widely used in various devices or equipments for examining small objects Spherical lenses with highly polished surfaces and ground edges View Details

These lenses are used in transforming a point image to a line image or changing the height of an image without changing its width View Details

Low cost, effective teaching Self contained Easily seen from a distance. Mechanism clearly understandable Loci drawn for further study. View Details

On insulated stand or tripod base Hamertone finish cone, sphere cylinder accurately made set of 3 medium size. Conductor :-(Spare) Same as above any shape. View Details

To show the differential expansion of metals in a bimetallic strip. Comprising a length of bimetal strip 150x15 mm mounted in a wooden handle. View Details

Hardwood, polished, 24 H x 15 cm. base dia. Four different sections circle, ellipse, parabola, and hyperbola held together by a pin and easily taken apart for demonstration. View Details

Low cost, effective teaching Self contained Easily seen from a distance. Mechanism clearly understandable Loci drawn for further study Standard mechanism for intermittent transport. View Details

Connected Leads Science Labs JLab is Manufacturer, Exporter Supplier of Connected Leads. View Details

Single Dial Capacity Box : High grade paper condensers of accurate value housed in wrinkled metal case in one dial each consisting of ten steps. View Details

For demonstrating the principle of conservation of momentum and showing that momentum is a vector quantity having direction as well as magnitude. View Details

Low cost, effective teaching Self contained Easily seen from a distance Mechanism clearly understandable Loci drawn for further study Standard mechanism for rotary to linear conversion. View Details
Low cost, effective teaching Self contained Easily seen from a distance Mechanism clearly understandable Loci drawn for further study Standard mechanism for intermittent feed. View Details

One cylinder, 4 cycled and double valve system gas engine, to show operations like intake, compression, explosion, exhaust, spark and others, mounted on wooden base with spark plug and battery. View Details

Optically worked, silvered back with protective coating. Dia. mm Focal Length (mm.) 50 50 75 50 100 50 150 50 200 50 300 75 50 75 75 75 100 75 150 75 200 75 300 View Details

Optically worked, silvered back with protective coating. Dia. mm Focal Length (mm.) 50 50 50 75 50 100 50 150 50 200 50 300 75 50 75 75 75 100 75 150 75 200 75 300. View Details

Newly designed holder which can hold different type of electrodes. Complete assembly can be put on the top of the vessel/jar. View Details

Simple circuit modules can be used to construct simple circuits. Very useful for younger pupils. View Details

The apparatus consists of a fabricated transparent acrylic stand supporting three cells in the form of 50 ml glass beakers. View Details

Cast iron plate heater with built in heating resistance. Aluminium body oven coated with acid proof epoxy paint. View Details

Cork borer for chemistry and biology laboratories, available in different designs and construction finishes. View Details

Copper water bath for heating a dish, flask or test tube gently in hot water or steam; made in various specifications to the buyer's requirement. By JLab. View Details

Clamp holder bosshead with black powder coating and zinc plating. View Details

This Collection contains 20 Types of Basic Rocks Specimens of Igneous, Sedimentary & Metamorphic Rocks Types. View Details

This Collection contains 25 Types of Basic Rocks Specimens of Igneous, Sedimentary & Metamorphic Rocks Types. View Details

Collection of 50 rock specimens of igneous, sedimentary and metamorphic types, from andesite and basalt to marble, quartzite and slate, by JLab. View Details

This Collection contains 10 Types of Basic Rocks forming Minerals Specimens. View Details

Igneous rock forms through the cooling and solidification of magma or lava. Igneous rock may form with or without crystallization, either below the surface as intrusive (plutonic) rocks or on the surface as extrusive (volcanic) rocks. View Details

Sedimentary rocks are types of rock that are formed by the deposition of material at the Earth's surface and within bodies of water. View Details

A collection of 15 metamorphic rock specimens. Metamorphic rocks form when existing rock types are transformed by metamorphism, which means "change in form". View Details

Set A of 20 basic mineral specimens, different from sets B and C. A mineral is a naturally occurring, usually abiogenic solid with a definite chemical formula and an ordered atomic structure. View Details

Set B of 20 basic mineral specimens, different from sets A and C. Listed minerals include beryl, fluorite, halite, pyrite, selenite and talc. View Details

Set C of 20 basic and rare mineral specimens, different from sets A and B. Listed minerals include bauxite, chalcopyrite, corundum, garnet and hematite. View Details

A collection of 25 basic mineral specimens, including quartz, feldspar, hematite, magnetite, pyrite, gypsum and graphite. View Details

This Collection contains 30 Types of Basic Minerals Specimens. The Minerals Specimens include Some of the following Agate, Alabaster, Amethyst, Barytes, Beryl, Biotite, Boron, Calcite, Chalcopyrite, China Clay, Dolomite. View Details

A reference collection of 50 basic mineral specimens, including fluorite, galena, chromite, sphalerite, talc and several varieties of quartz. View Details

A reference collection of 70 basic and rare mineral specimens, including apatite, azurite, kyanite, borax, emery and several varieties of quartz. View Details

A collection of 20 basic earthy mineral specimens, including kaolin, bentonite, fire clay, fuller's earth, red and yellow ochre, French chalk and talc. View Details

An ore is a type of rock that contains minerals with important elements including metals. The ores are extracted through mining; these are then refined to extract the valuable element(s). View Details

A starter collection of 20 basic stones mixing rocks such as granite, marble, slate and pumice with minerals such as quartz, feldspar, calcite and magnetite. View Details

This Collection contains 20 Types of Specimens, (10 Rocks Specimens of Igneous, Sedimentary & Metamorphic Rocks Types & 10 Minerals Specimens). View Details

This Collection contains 50 Types of Specimens, (25 Rocks Specimens of Igneous, Sedimentary and Metamorphic Rocks Types and 25 Minerals Specimens). View Details

This Collection contains 100 Types of Specimens, (64 Minerals Specimens and 36 Rocks Specimens of Igneous, Sedimentary and Metamorphic Rocks Types). View Details

Metals are opaque, lustrous elements that are good conductors of heat and electricity. Most metals are malleable and ductile and are, in general, denser than the other elemental substances. View Details

Alloys are metallic materials consisting of two or more elements combined in such a way that they cannot be readily separated by physical means. View Details

This Collection contains Some of Basic Metals and Alloys Specimens. The Metal Specimens include Some of the following Aluminium (Al), Antimony (Sb), Copper (Cu), Cadmium (Cd), Iron (Fe), Lead (Pb), Magnesium (Mg), Nickel (Ni), Tin (Sn) and Zinc (Zn) etc. View Details

The Mohs scale of mineral hardness characterizes the scratch resistance of various minerals through the ability of a harder material to scratch a softer material. View Details

A collection of 10 soil and clay specimens, drawn from materials such as bauxite, diatomite, fire clay, fuller's earth, kaolin, the ochres, shale and slate. View Details

A collection of 12 types of wood, listed as including kail, partal, kapur, mango, jamun, peepal, tun and sagwan (teak). View Details

A collection of 6 types of plastic - PET, HDPE, PVC, LDPE, polypropylene and polystyrene - with examples showing their properties and uses. View Details

A collection of 9 types of glass: soda, potash, lead crystal, borosilicate, optical, photochromic and safety glass, glass fibre and coloured glass. View Details

This Collection contains 10 Types of Fibers. The Kits include Some of the following Fibers:- Textile Fibers (Natural), Artificial Synthetic Fibers, Planting Fibers and Paper Making Fibers. View Details

Collecting river system consists of a network of tributaries in the headwater region. V-shaped valleys, interlocking spurs, rapids, waterfalls and gorges are features associated with it. View Details

Convergent plate boundaries, also known as destructive plate boundaries are zones where lithospheric plates collide. View Details

A cape is a point or body of land extending into a body of water, usually the sea. Size 35 x 40 cm. View Details

Confluence is the point where two streams flow together, merging into a single stream. Size 40 x 35 cm. View Details

Terrain feature that is rounded like the exterior of a sphere is a convex slope. Terrain feature that is rounded inward like the inside of a bowl is a concave slope. View Details

Cycle of Erosion 3D model made of rigid PVC with a markable, washable surface, hard backing, aluminium frame and hooks. View Details

Rubber stamp for teachers to fix impression of clock in student note book for exercise. View Details
.jpg)
Non-magnetic circle fraction set by JLab, supplied with one base-keeper for placing the fractions. View Details

Squat form porcelain crucibles with lid, glazed inside, in 25 ml and 50 ml capacities, for heating, melting and dehydrating materials. View Details

Maintain a sharp cutting edge of the cork borer with our premium range of cork borer sharpeners. View Details

Spring loaded crocodile clips in standard size are available with us. View Details

Brass cork borers for making uniform holes in corks and rubber stoppers to insert glass tubes; available in sets of 6, 8 and 12. View Details

Enamelled copper wire in 75 g rolls, available in SWG 24, 26, 28, 30 and 32 gauges, for winding transformers, inductors and coils. View Details

Constantan (nickel-copper alloy) resistance wire with a low temperature coefficient, in 75 g rolls of SWG 24, 26, 28, 30 and 32, for resistance coils. View Details

Jointless copper calorimeter with a copper inner vessel, aluminium outer casing and a bakelite cover with two holes for a thermometer and stirrer; thermometer not included. View Details

Set of 4 conductivity rods, each 12 inches long, made of different materials are supplied to schools, colleges & research laboratories. View Details

Vacuum type convex mirrors with F/L 5, F/L 10, F/L 15, F/L 20, F/L 25 & F/L 30 for superior long life are found with us to be used in various lab applications. View Details

Prime quality convex mirrors with F/L 5, F/L 10, F/L 15, F/L 20, F/L 25 & F/L 30 are available for scientific applications. View Details

Convex lenses (Accurate type) with identical curvature on both sides, in focal lengths F/L 5, 10, 15, 20, 25 and 30, for school, college and research labs. View Details

High quality Vacuum type concave mirrors with F/L 5, F/L 10, F/L 15, F/L 20, F/L 25 & F/L 30 having superior longer life are available for lab use. View Details

We are exporters of Concave lens with F/L 5, F/L 10, F/L 15, F/L 20, F/L 25 & F/L 30 (Accurate Type) for use in school and college labs. View Details

Concave mirrors, 50 mm in diameter, with a silver coating and epoxy paint at the back, in focal lengths F/L 5, 10, 15, 20, 25 and 30, for light collection, imaging and focusing. View Details

Paper and Plastic mounted Colour Filters to be used in colorimeters made with good quality materials. View Details

Hard glass combustion tube, 12 x 1 inch, with two one-hole rubber corks, for carbon testing of iron slag in a tube furnace; each tube is pressure-tested. View Details

Colony counter is used for analysing bacterial and cell count in culture tests accurately, with 110 mm diameter magnifying glass. View Details

Standard Cobalt Chloride Papers are made to show the presence of water either in liquid or vapour form. View Details

Technically sound Clinostat Clock Type can be purchased here for laboratory demonstrations and experiments. View Details

Plastic coated demonstrating charts (Size: 50cmx75cm) printed with clear and high quality graphics allow the students to understand the core of the subject with ease. View Details

Electrical Centrifuges with 4 & 8 tube capacity are made available, used in chemistry, biology, biochemistry and clinical medicine laboratories. View Details

Hand Driven Centrifuge for 4 tubes with swing out head & polyamide made buckets. View Details

Centre of Gravity Apparatus for lab demonstrations explaining the geometrical centre of gravity of two-dimensional objects. View Details

Supreme quality porcelain & plastic made cavity tiles with 12 holes are supplied for science lab applications. View Details

Plastic cell holders accustomed to hold batteries to connect different electrical circuits in science experiments. View Details

We cater to the general lab needs with our wide range of technologically advanced Cathode Ray Oscilloscopes (CRO). View Details

Efficient in their task, Carbon rods are used in studying the theory of static electricity charges. View Details

Charles' law apparatus with a glass Charles' law tube and a glass beaker with stirrer, for showing the thermal expansion of gases and estimating absolute zero in degrees Celsius. View Details

Two types of tube stands are available i.e. 3 tubes and 6 tubes. View Details

Dimensions 57 mm length, tapered from 38 mm diameter at top to 22 mm diameter at bottom; length of tapered portion 35 mm. View Details

CP tuning fork with a durable finish, sturdy and long-lasting, available in various specifications. By JLab. View Details
Chart cabinet that keeps 100 charts rolled and hanging on 10 sliding hangers with 10 hooks each, behind a hinged door with a locking arrangement. View Details

Stainless Steel, Zinc, Aluminium, Brass, Copper and Iron. View Details

Stainless steel, zinc, aluminium, brass, copper, iron, wood and plastic. View Details

Cross-shaped magnetic stirring bars in PTFE with Alnico V magnets; one set holds one bar of each size. View Details

Chloroform bellow with cotton net, for use with automatic burettes. Abrasion resistant, with a precise design and a fine finish. View Details

Calcium chloride is made using glasses that can hold chemicals that are acidic in nature. View Details

Contracted Kidney Model an atrophic kidney that may be scarred and granular. View Details

Teaching model of a child with chicken pox and smallpox, made by JLab for microbiology, nursing and health-education classes. View Details

Teaching model on the cultivation of viruses in embryonated chicken eggs, made by JLab for microbiology and virology lessons. View Details

Teaching model of cytomegalovirus (CMV), a member of the herpesvirus family, made by JLab for microbiology and health-education lessons. View Details

Cat skeleton model for teaching the mammalian skeleton in school and college zoology labs, by JLab. View Details

Chromatography paper for separating and identifying the components of a mixture, such as the chemicals in ink or food. The sample is spotted on the paper, which is then dipped in a solvent. View Details

Student circuit board for teaching the basics of electrical circuits and connections, made of sturdy material to withstand the wear and tear of laboratory demonstrations. View Details

4 pin connectors can be availed to connect & transfer power to different experiments generally conducted in electronics and physics laboratories. View Details

Cotton reel thread for attaching and tying components needed in experiments. The thread is made of pure cotton and comes wound on reels. View Details

Current meters by JLab measure the velocity and direction of water flow; propeller-type, pygmy-type and cup-type models are available. View Details

Cold Light Source by JLab, single- or double-lamp model, 250 W (24 V) output, SMPS design for 180-270 V AC input, rotary potentiometer intensity control. View Details

Color Vision Testing sets supplied by JLab: a pediatric picture test, a double set of 16-hue caps, and the Farnsworth-Munsell 100 Hue and D-15 tests. View Details

COD Digestion Apparatus by JLab: a solid-state block digester for 15 samples in 38 mm glass reaction vessels at 150 degrees C, with digital temperature control, for chemical oxygen demand. View Details

Cadaver Tank by JLab for cadaver storage in teaching facilities: Type 304 stainless steel, built-in submersion storage with a platform raised and lowered by a two-position manual lift. View Details
Conservation of Angular Momentum demonstration by JLab: a hand-spun arm on a vertical board with two weights pulled inwards by a cord; for visual demonstration, with an instruction manual. View Details

Glass cover slips, squares glasses dimensions 22 x 22 mm. View Details

Soft, highly absorbent cotton wool supplied as balls, rolls and buds for laboratory use, by JLab. View Details

Cork borer plated brass cutting tubes mounted with safety under flange M shaped handle with rod for clearing borers dia meter to 18 mm. View Details

Tapered stoppers of natural dark cork, listed in 42, 45, 48 and 50 mm sizes. View Details

Chromatography paper in box of 100 sheets, size 250 x 250 mm View Details

Tubing clips in packs of 10: plated metal Mohr clips for tubing up to 15 mm, nickel-plated Hoffman clips for tubing up to 25 mm, and spring clips. View Details

Borosilicate glass condensers: Liebig with narrow fused-on jacket, 500 mm overall, and Graham with fused-in cooling coil, 250 mm long x 37 mm. View Details

Squat form porcelain crucibles with cover, glazed inside and outside except the base; a glass version with reinforced rim is also listed. Made by JLab. View Details

Clay Triangles, iron wire pipe clay tubes 150 mm. View Details

Apparatus simple version for student use with appropriate turn table which is hand operated. View Details

Simplified capillarity apparatus: three capillaries of varying bore in three corks, with a metallic holder and a chamber for water or oil, by JLab. View Details

Metal copper 75 x 59 mm diameter Aluminum 100 x 65 mm diameter View Details

Drilled to accept thermometer with immersion heater 12V DC 50w to fit with calorimeter block View Details

Circuit board for making Connections with holes. View Details

Current balance kit on a wooden base with magnet pairs, balancing weights, a straw and circuit wire with terminals, for use with a 1.5 V dry cell, by JLab. View Details

Contusions by Blunt Weapon Stick Model View Details

CPR training manikin for practising external chest compression and artificial respiration, with indicator lights, a digital display and sound prompts. View Details

Model showing the seven stages of birth: engagement, descent, flexion, internal rotation, extension, restitution and external rotation, and birth of the child. View Details

Custom Dual Pump Demonstration Model View Details

Enlarged dissection model of a cockroach showing all internal parts. On base, numbered with an English key card. By JLab. View Details

Two-part 3-D model of a chloroplast, enlarged about 60,000 times, showing the interior where photosynthesis takes place. Mounted on a stand with numbered key card. By JLab. View Details

Bench-top digital clinical centrifuge with a resiliently mounted motor, a built-in 5-step speed regulator and a choice of swing-out or angle rotor. View Details

General-purpose digital laboratory centrifuge up to 5200 rpm, with microprocessor LCD control, a 0-59 min timer, programmable speed and a lid lock. View Details

Mechanical analytical balance with a golden chain for external manipulation of weights up to 100 mg, in a polished wooden case with Sunmica top. View Details

Circular dial suspension scale with a thick break-resistant lens over the dial and heavy-duty chrome-plated hooks and rings. View Details

Digital kitchen scale, 5 kg x 2 g, with a toughened shatter-resistant glass platform, 15 mm LCD digits and a lithium battery. View Details

Non-corrosive mounting hardware with weather resistant sealed lenses View Details

The colour meter for both colour and luminance measures surface colours of products. View Details

Set of 9 glass microscope slides illustrating chromosome division in animal and plant cells View Details

Set of 50 glass microscope slides covering major animal histology topics: the Basic Histology Set slides plus heart, spleen, cochlea, glands and more. View Details

A Multi-step Reduction Reaction. Instructions Included. Kit contains sufficient reagents for five demonstrations. View Details

Form a metal alloy as bismuth and tin are heated to the eutectic point of the two metals. Instructions Included. Kit contains sufficient reagents for five demonstrations. View Details

A Dynamic Demo on the Overhead. Kit contains sufficient reagents for five demonstrations. Instructions included. View Details

Show an example of polymer chemistry. This polymer is referred to as Nylon 6-10. Kit contains sufficient reagents for five demonstrations. Instructions Included. View Details

A few coloured crystals are added to a clear solution in a glass jar or beaker. Kit contains sufficient reagents for five demonstrations. Instructions Included. View Details

In a few seconds, the solution will suddenly turn dark blue. Increase the temperature of the solution, and the reaction occurs more rapidly. Dilute one of the solutions, and the reaction occurs more slowly. View Details

A close-up view of Kingdoms of Life. Stunning photographs and detailed illustrations provide your students with a stimulating view of similarities and differences of life on Earth. View Details

Compact mini centrifuge running to 7000 rpm below 45 dB, with two interchangeable rotors for 2 ml tubes and PCR tubes. View Details

Enzyme buffer solutions are presented as 50ml concentrates in handy storage bottles. View Details

Introduce your students to the Five Kingdoms through the process of classification. A fun way to learn about biodiversity. View Details

Cell to Embryo Model Activity Set Understanding the development from egg fertilization to a 35-day old embryo is easy with 3-D illustrations of the ovum, fertilization, ovulation, initial cell division and implantation. View Details

Set includes a full-colour markable model of durable vinyl and an activity guide with background information, basic understandings, teacher-developed activities, a glossary, a key to model structures, colour transparencies and a blackline master. View Details

Microslide set on the central nervous system: eight related 35 mm images, including a mammal brain, the human spine, grey matter of the cord, a neuron and the retina, with a text folder. View Details

60-well micro plate with 48 small and 12 large wells, built to the dimensions of standard 96-well and 48-well plates. View Details

The polypropylene plates are opaque, resistant to most organic chemicals and autoclavable. View Details
.jpg)
Replacement heating bottle with lid for the Combo still microscale distillation apparatus, sold individually. View Details
.jpg)
Replacement inner reaction vessel for the Combo still microscale distillation apparatus, sold one at a time. View Details

Microscale still for school organic chemistry that replaces conventional apparatus; supplied with a Comboplate and a starting manual. View Details

LED that lights when current flows, used to check conductivity and electrolysis circuits in microscale chemistry with the Micro science range. View Details
.jpg)
Clear polypropylene 60-well micro plate with 48 small and 12 large wells, used for micro titration and hundreds of school science experiments. View Details
.jpg)
Microscale still that replaces conventional organic chemistry apparatus, so school practicals run in about a third of the usual time with smaller chemical volumes. View Details

Small LED indicator for Micro science circuits that lights when the solution in a well conducts, so no meter is needed. View Details

Small combustion tube from the Micro science spares for heating a little solid strongly and watching how it burns or breaks down. View Details

Topic science kit on the characteristics of materials: hard wearing materials, strongest fabric, absorbency of different papers and flammable materials. View Details

Model set for building complex ions, showing ligands bonded to a central metal ion, for transition metal and coordination chemistry lessons. View Details

Samples of igneous, sedimentary and metamorphic rocks. Set of 55 specimens. View Details

Clever Catch Rocks 24 inches (600mm) inflatable ball tests your students' knowledge of rock specimens. View Details

This Cam Analysis Apparatus runs interchangeable cams on a motor-driven camshaft so students can plot follower displacement and study jump and bounce at different speeds. View Details

A range of heavy duty zinc chloride batteries available in AAA, AA, C, D and PP3 sizes. View Details

A 3 V lithium coin cell with 200 mAh capacity. View Details

The Cavitation Apparatus shows vapour bubbles forming and collapsing in an acrylic convergent-divergent test section, so students can compare theoretical and actual pressures. View Details

Cell holders on base with 4 mm terminal 1 x D cell View Details

Components mounted on sturdy panels for ease of use and storage. View Details

Pack of 8 mounted clips to hold components in physics investigations. View Details

Available in packs of 10 containing 5 assorted colors or packs of 20 containing red and black. View Details

Available in packs of 10 containing 5 assorted colors or packs of 20 containing red and black. View Details

View highly detailed photos of common materials and explore their applications to our daily lives. View Details

Protection against student's wrong connection by means of fast blow fuse. View Details

As the steel spheres track a pattern on the kit's turntable. View Details

127mm funnel. An inner receiving vessel and outer body all of copper View Details

This kit demonstrates callus tissue production from root cells, and the regeneration of whole cloned carrot plants from the callus. View Details

This kit provides the media, equipment, and instructions for propagating small cauliflower plantlets from cauliflower curd, by the process of meristem culture. View Details

Essential for studies on geotropism and phototropism on seedlings, cut shoots, and small potted plants. View Details

Bare Wire Copper 0.45 dia 0.45 mm diameter, 250 g per reel View Details

14 swag 2 mm diameter, 500 g per reel View Details

A copper nickel alloy of low temperature coefficient suitable for resistance coils. View Details

A copper nickel alloy of low temperature coefficient suitable for resistance coils. View Details
.jpg)
Made of brass, interchangeable on pillars, fitted with insulators of ebonite on metal base View Details

Consists of a plastic container with an insulated bake lite top lid having 3 rectangular copper electrodes mounted underneath. View Details

Suitable for plotting electric fields by means of the equipotential points method. View Details

Can be used to supplement the Demount able Transformer kit or can be used in conjunction with the U-Core from this kit and any combination of the other coils (listed below) for your particular requirements. View Details
.jpg)
Can be used to supplement the Demount able Transformer kit or can be used in conjunction with the U-Core from this kit and any combination of the other coils (listed below) for your particular requirements. View Details

The unit is housed in a robust ABS case measuring 75 x 100 x 40 mm and has a high quality rotary selector switch plus two 4 mm safety sockets. View Details

The apparatus comprises a metal frame holding six capillary tubes of different bores vertically in a trough. View Details

Used to demonstrate force exerted by atmospheric pressure. View Details
The centre zero universal meter (Universal Galvanometer) is electrically identical to the universal meter. View Details

Small format Cast Alloy Mass and Hanger Set. JLab 100g (9 x 10g Mass, 1 x 10g Hanger). View Details

Small format Cast Alloy Mass and Hanger Set. JLab 1000g (9 x 100g Mass, 1 x 100g Hanger). View Details

Flat masses, with a large central hole and the small slot to prevent masses sliding off the hanger. View Details

Flat masses, with a large central hole and the small slot to prevent masses sliding off the hanger. View Details

The lamp housing is mounted on a stainless steel rod about 150 mm x 10 mm diameter. View Details

50 cm diameter concave mirror - Glass with a focal length of 75 mm optically worked, silvered back with protective coating. View Details

50 cm diameter convex mirror Glass with a focal length of 75 mm optically worked, silvered back with protective coating. View Details

A set of 5 ceramic magnets, of 32mm external diameter. Illustrates magnetic repulsion forces. View Details

Chrome steel bar magnets packed in pairs with keepers. Coloured Half Red, Half Blue. View Details

In this experiment dielectric constant is studied as a function of temperature and transition temperature (Curie temperature) is observed. View Details

Angles 60 x 60 x 60. 38 mm accurately worked. View Details

A copper calorimeter specially made to fit the Combo still, enabling physics experiments to be performed on a micro scale. View Details

Resting on a felt pad inside an outer vessel 100 x 75 mm (diameter). View Details

With parallel sides and rolled rim, without stirrer. View Details

The kit contains a 60 mm long and 20 mm in diameter cylinder which has a resistance of approximately 20 W. View Details

Five rods, one each of aluminium, brass, copper, zinc and iron, embedded along one side of a metal tank, size 150 x 90 x 100 mm. View Details

Rates of conductivity in the different metals can be compared by the difference in time taken for each cup of wax to melt. View Details

To demonstrate relative thermal conductivity of brass, copper, nickel, aluminum and iron. View Details

Consists of a metal box 220 x 100 x 165 mm, with a sliding glass front and two detachable glass chimneys. View Details

Comprising rectangle of 20 mm boro silicate glass tubing fitted with a filling funnel to show convection in liquid. View Details

Comprising partly evacuated glass bulb approx 70 mm diameter, with contained at its centre a fine pivot which supports four lightweight metal arms. View Details

Hamburger Coil with platinum electrode for use with Conductivity bridge, Dip Type. View Details

The Cordless Compound Monocular Microscope gives 40X, 100X and 400X under an LED that runs on mains or a rechargeable battery, with a carry handle on the arm. View Details

Copper Constantan mounted on a superior quality Bakelite strip. View Details

Three-in-one Callender and Griffiths bridge, Carey Foster bridge and potentiometer, with 14 series coils of 1 ohm and a 50 cm slide wire of 1 ohm, by JLab. View Details

The Cordless LED Binocular Stereo Microscope gives 20X and 40X views with top and bottom LED light running from mains or a rechargeable battery. View Details

The Cordless Rechargeable Dual Power LED Stereo Microscope gives two magnifications from its objective turret and runs on three rechargeable batteries. View Details

The Cordless Rechargeable Tri Power LED Stereo Microscope steps through three magnifications on its turret and runs on three rechargeable batteries. View Details

Each Slide wire division is equal to 1/2 milli volt or 500 micro volts. View Details

This compact Electronic Unit is very useful for standardization of DC Potentiometer, Calibration of Voltmeter & Ammeter using DC Potentiometer. View Details

This prepared slide set features 20 assorted specimens. It is a great way to introduce the microscopic world to children. View Details

Casting Tray 7 x 14cm with embossed gel ruler. Each tray comes with two rubber end caps. View Details

Casting Tray 7 x 7cm with the embossed ruler. Each tray comes with two rubber end caps. View Details

This life-size model comes with an instruction booklet that corresponds to the 22 colored sections View Details

This model shows the occipital plate, cervical, thoracic and lumbar vertebrae, sacrum, coccyx, and pelvis. Comes with hanging stand. View Details

This model has 8 pieces to show the main stages of mitosis (prophase, metaphase, anaphase, and telophase). View Details

It can be used to investigate parallel and series circuits and comes with a manual. View Details

The kit also includes an ammeter and voltmeter that can be connected to measure voltage and current throughout the circuit View Details

Physical Science kit contains a range of good quality, curriculum-aligned materials to make teaching CAPS a breeze. View Details

It covers the core elements of the curriculum, packs away conveniently into a metal cabinet and comes complete View Details

It covers the core elements of the curriculum, packs away conveniently into a metal cabinet and comes complete View Details

It is designed for the hands-on learning environment and is structured to work best with up to 10 groups. View Details

It is designed for the hands-on learning environment and is structured to work best with up to 10 groups. View Details

The Technology kit, housed in a sturdy plastic trunk is CAPS aligned and contains sufficient material for 10 groups to work with at a time. View Details

A 12-way connector strip for keeping wires neatly and securely connected. View Details

These hardy plastic cams are designed to fit the 4mm plastic rods. View Details

Include hands-on-learning in your next maths lesson with this colourful geometry kit. View Details

The T-square for class board use is made from hard-wearing plastic. View Details

A chainsaw (or chain saw) is a portable, mechanical saw powered by a gasoline two-stroke engine. View Details

We provide our customers with high precision Circular Saw Machine that are fabricated using the superior quality raw material. View Details

Combination Surface Planer and Thicknesser View Details

Automatic Grade. Horizontal Machine Structure. Hose/Pipe Crimping Machine View Details

Compressor Analyzer tests all single phase compressors up to 5 HP, 110, 220, or 277 volts. View Details

Continuous Well Logger: a portable, microprocessor-based digital multi-probe borehole logger operated through a notebook PC, with data stored and displayed on the PC. View Details

If your daily tasks require higher accuracy, the Tru Pulse 200 X can help you get the job done. View Details

High efficiency and high discharge rate at less power consumption. View Details

Reinforcement depth measurement Bar size can be preset if known or detected automatically for survey View Details

Use:- Measurement of density and specific density, standard weighing. View Details

The equipment consists one each of the following:- Load Frame, Hand operated, Capacity 5000kg View Details

Use:- For accurately determining the density of gravels and coarse soils. View Details

The standard outfit comprises of the following items. Loading unit, maximum capacity View Details

The core cutter is driven into the soil using the driving hammer. View Details

For determining the liquid limit of soils. This is specially useful to obtain reliable View Details

Chapman Flask for the approximate apparent specific gravity, voids and surface moisture of fine aggregate; 450 ml capacity with 1 ml divisions. View Details

The Computerized Universal Testing Machine runs tension, compression and bending tests and shows load, elongation, UTS and stress-strain graphs on screen. View Details

Pressure measurement bench allows the student to investigate the measurement of one of the fundamental parameters View Details

The Creep Testing Machine is a table unit that measures the creep of lead and PP specimens under tensile stresses of 5 to 25 N/mm2. View Details

Interface system conditions the raw data from the sensors digitizes the data View Details

Cavitation Demonstration is a small scale apparatus designed to demonstrate Cavitation utilizing a Hydraulics Bench. View Details

The Computer Aided Optical Comparator measures part profiles on a 350 mm screen, with encoder readout to 0.002 mm and a software-driven stage for automatic measuring. View Details

We are the manufacturer of all type of Centre Lathe Machine. Such as Light Duty View Details

The Cam and Follower Apparatus plots follower lift for five hand-rotated cam profiles using roller and knife-edge followers, a 360 degree protractor and a dial gauge. View Details

This Co-Efficient of Discharge Apparatus is a self-contained, frame-mounted rig with a 0.5 HP single-phase pump and control valve, used to find the coefficient of discharge. View Details

Measurement Graduations: 1/24 inches, 1/32 inches. Etched graduations in 14ths, 20ths, 24ths, and 32nds View Details

The Centrifugal Pump Test Rig is used to plot head, discharge and efficiency curves of a 40 mm centrifugal pump at three belt-drive speeds. View Details

The Closed Circuit Apparatus is used to calibrate 25 mm venturi and orifice meters fitted on two G.I. pipelines, with water from a 0.5 HP pump. View Details

The Closed Circuit Jet on Vane Apparatus is used to study the force a water jet exerts on vanes, with the water recirculated in a closed circuit. View Details
.jpg)
The Closed Circuit Apparatus is used to find the coefficients of discharge, contraction and velocity of orifices, with water from a 0.5 HP pump. View Details

We are engaged in catering to the variegated requirements of the customers by bringing forth View Details

Drilling Capacity: 16mm Worktable Size : 500 x 160mm View Details

Drilling Capacity: 10mm Worktable T-Slot Size: 8mm No. of T-Slot on Table : 3 View Details

Swing over bed : 250mm Swing over carriage : 110mm View Details

The CNC Lathe Machine has a two-speed 2.2/2.8 kW spindle motor, a gang tool carriage with three holders, a three-jaw chuck and a thread function. View Details

The offered CNC Lathe Machine table is known to be one of the best that is available in the market. View Details

Max. Turning Dia: 55 mm Max. Turning Length: 100 mm Swing Over Bed: 150 mm View Details

The CNC Milling Machine is a production mill whose inbuilt CNC system drives three axes by stepper motors and ball screws, with an inverter-controlled spindle. View Details

The CNC Milling Machine XL has a 700 x 180 mm working table and an 850 W motor, and drills to 20 mm and face mills to 63 mm, with a coolant pump. View Details

3/2 axis CNC controller for milling machine High-speed Ethernet-based View Details

We provide a high quality of CNC Retrofit Kit for Conventional Universal Milling Machine. View Details

The CNC Lathe Trainer is a computer-controlled training lathe with a 250 mm swing over bed, 450 mm between centres, a brushless motor and a 4-way tool post. View Details

The controller is a cost-effective CNC Lathe controller - with all the push buttons, selector switches and MPG. View Details

The CNC Milling Trainer Deluxe adds a 305 mm aluminium base, engraved X-axis scales, upgraded hand wheels and a 70 to 2800 rpm electronically controlled spindle. View Details

6 axis movement, 6 axis interpolation linkage movement. 6 stepper/servo motor control. View Details

Semi Production Mill machine specially designed with industrial controller. View Details

This CNC Lathe is perfectly suitable to be used for light production purpose. View Details

The desktop machining system with capabilities to produce most anything from very simple View Details

We are committed to offering the most advanced CNC milling with comprehensive services and technical support. View Details

Distance between centers: 600mm Spindle bore: 934;26mm Spindle speeds: 30-4000rpm View Details

Owing to the perfect quality and supreme performance, the offered product is highly appreciated in the market. View Details

Max. the distance between centers: 360 mm Swing over apron: 60 mm The width of bed: 100 mm View Details

We are actively engaged in manufacturing and supplying an excellent range of CNC Drilling Machine. View Details

The contact time and reaction temperature can be varied. View Details

This Cabinet With Tools is a steel cabinet of about 1700 x 520 x 1840 mm with sliding doors, tote trays and a kit of automotive workshop tools. View Details

Refrigerated (Chiller) Water Bath is available with the outer body constructed using powder coated mild steel sheets. View Details

An ideal steady state flow reactor the contents of the reactor are well mixed and have a uniform composition throughout. View Details

This Coriolis Component of Acceleration apparatus finds the Coriolis acceleration of water flowing through motor driven arms at set speeds and flow rates. View Details

This Cam and Follower Model measures follower stroke against cam angle with a scaled disc and position gauge, using roller tappet, cup tappet or trailing lever followers. View Details

The polymerization reaction can be acid catalyzed or self-catalyzed. View Details

Stirrer for MFR: Stainless Steel Impeller and shaft coupled with FHP motor JLab make View Details

Coulomb Meter is a useful tool and behaves similarly to a Digital Electroscope. View Details

The Current To Pressure Measurement Trainer converts a current signal to air pressure on an I to P converter, with a digital current source and two pressure gauges. View Details

The Control Valve Characteristics Trainer measures flow against valve opening on a 1/2 inch globe control valve with a diaphragm actuator, I to P converter and rotameter. View Details

The sensor has three operating ranges and a zeroing switch to discharge the input capacitor. View Details

The Combined Convection and Radiation accessory heats a horizontal cylinder in a vertical fan-fed duct so students can separate convective and radiative heat loss. View Details

This Caulking Gun has a steel frame, a steel push rod with quick-release and a comfortable grip, and takes most standard caulk and sealer cartridges. View Details

This Center and Flat Drill Bits Set has centre drills from 1 to 6.3 mm for lathe centre holes and flat drill bits from 6 to 40 mm for boring wood. View Details

This one piece welding Chipping Hammer has a steel spring handle and is used to knock slag off arc welds between runs. View Details

These Club Hammers have a 1.81 kg (4 lb) head with hardened, ground striking faces and a fibreglass handle with rubber grip for chisel and masonry work. View Details

This Cross Cut Saw cuts timber across the grain, with 21 to 27 in blades, gulleted teeth, a clear finished beech handle and an auxiliary front handle. View Details

The Cross Flow Heat Exchanger passes water and fan-driven air at right angles, with K-type thermocouples at each inlet and outlet, for use with the Heat Exchanger Service Unit. View Details

Charts are printed on art paper in full color. Using the latest printing technology. View Details

This Laboratory scale working model housed on a M.S. Square tube frame and further mounted on a wheels(CI) with instrumentation panel is used:- i) To study the vapor compression refrigeration cycle. ii) To calculate Co-efficient of performance (C.O.P.). View Details

Features:- Size : 250 x 250 mm Height : 1000 mm Material : Aluminum body with acrylic frame View Details

Smooth action thread with one piece cutter-slide and hardened alloy steel cutting wheel. View Details

Copper tube pipe bender and conduit bender. View Details

Color-coded quadruple calibrations with app.0-300 psi, 21 kg/cm ², 21 bar and 2100 k pa. View Details

Power on type tests app. 6, 12, 24 V circuits. View Details

The above model will be painted with Spl Du co painting, Electroplating of hardware will be carried out. View Details
.jpg)
The complete internal details can be demonstrated by operating the kicker lever to show the working of the piston, sparks from the spark plugs can also be shown. View Details

The Arrangement of Wheels And Axle Connecting To steering system will be done so the movement of the wheels when rotating the steering wheels can be displayed. View Details

This model is made out of original used heavy vehicle parts, suitably sectioned to show clearly the action of Differential gear box, such as pinion crown wheel in Differential and Brake drums in Rear axle, A Crank handle is provided to demonstrate the mod View Details

Two Stage, Twin Cylinder air compressor-3 HP with a displacement capacity of about 300 LPM and to work against maximum pressure 12 Kg/Cm2 The Unit is mounted on a storage tank. View Details

Compressive Strength Testing Equipment to test cement, brick and concrete is offered by us. View Details

Compression Testing Equipment Manually (Hand) Operated fitted with single load gauge. View Details

The Digital Indicator incorporates a 4-Digits display calibrated in Kilo Newton (KN) and preset to maximum load capacity fitted with micro switches to switch-off the motor when the load approaches the maximum capacity of the gauge, avoiding any over loadi View Details

The loads are measured on Bordon tube type load gauges which are calibrated against certified proving rings. View Details

The Load is displayed simultaneously on the Digital Load Indicator which incorporates a 4-Digits display calibrated in Kilo Newton (KN), preset to maximum load capacity and also on Bordon tube type Load Gauge with a maximum load pointer. View Details

Cylindrical Mould 150 mm dia. x 300 mm ht with base plate made of Cast Iron. View Details

An air hole of approximately 3 mm dia is drilled on the tube near handle. View Details

The lower openings of the hoppers are fitted with hinged trapdoors having quich release catches. Supplied complete with one plasterer's trowel and one tamping rod, 16 mm dia x 600 mm long, one end rounded. View Details

It has two speeds of 140 + 5 r.p.m. and 285 + 10 r.p.m. with planetary motions of approximately 62 r.p.m. + 5 r.p.m. and 125 r.p.m.+/-10 r.p.m. respectively. View Details

Used to sterilize, refrigerate, or incubate culture dishes. Design allows for easy carrying or stacking of dishes. View Details

Economical cotton-tipped applicators with a wooden shaft, 6 in long. View Details

Durable, thermo-formed two-piece plastic balance is a classroom favorite. Designed for use with plastic containers to hold manipulatives or liquids. View Details

Suitable for field studies, wet lab applications, wash down areas, and food testing and tanks, this digital thermometer reads temperatures in liquids, semi-solids and gases. View Details

Precision compact balance offers a multitude of features for a diverse variety of weighing applications. View Details

These 60 plastic tape measures feature inches on one side and centimeter and millimeter markings on the reverse. View Details

Great for measuring and weighing. Each of these non-interlocking cubes weighs 1 g. View Details

Puts any student into the perfect crunch position. Inhibits improper crunch technique. View Details

1-5/8 x 3/4 plastic links in four colors promote hands-on discoveries in patterning, sorting, measurement, set theory and number concepts. View Details

This set has eleven 1 x 10 laminated strips showing wholes, 1/2, 1/3, 1/4, 1/5, 1/6, 1/8, 1/10, 1/12, 1/16 and decimals. View Details

Set of 10 rubber stamps on foam bases. Includes heads and tails of penny, nickel, dime, quarter and half-dollar. View Details

Transparent plastic chips are ideal for counting and sorting activities. View Details

Specially designed for students and educators. Function signs appear in the display to make teaching easier. View Details

Clever Catch Probability and Statistics ball: a colourful inflatable vinyl ball; players toss it and answer the question under their left thumb. Game directions included. View Details

Includes 2,850 coins:- 900 pennies, 600 nickels, 600 dimes, 600 quarters and 150 half-dollars. View Details

Capture the rich content of the hundreds chart. Players develop knowledge of multiples, divisors/factors, squares, primes, composites, plus even and odd as they study the anatomy of the first 100 numbers. View Details

Gives trigonometry teachers a new way to introduce basic right-triangle and unit-circle trigonometry concepts and makes trig accessible to younger students. View Details

Colourful tool to teach students counting, sorting and measuring. Includes 8, 16, 24 and 24 pieces in four lengths (6-5/16 in. to 3/4 in.) in a sturdy storage box. View Details

A cylindrical 20 mm internal diameter x 22 mm deep painted matt black is mounted coaxially upon a polished brass. View Details

Comprises 20 each of the following:- Glass tube 125 x 8 mm length x diameter, rubber tube 100 x 8 mm, length x bore View Details

The coil is centre hole and provided with 3 mm socketed terminals. View Details
For use with mini-motor unit. View Details

To demonstrate floating, suspension, sinking in accordance with Archemede's principle. View Details
A chrome plated steel bar 100 x 3.75 cms chromium plated bored at equal intervals of 50 mm and provided with removable knife edge. View Details

This set up is designed to study coriollis component of Acceleration of a slider crank Mechanism. The apparatus uses hydraulic analogy to represent the rotating slider. View Details

The Composite Walls Apparatus stacks MS, Bakelite and brass or aluminium plates on both sides of a mica heater to measure the thermal resistance and conductivity of a composite wall. View Details

The Critical Radius of Insulating Material unit heats four G.I. pipes under plaster of Paris of different thickness to show that heat loss peaks at the critical radius, k/h. View Details

The Critical Heat Flux Apparatus shows the pool boiling regimes on a current-heated test wire in water, up to the burnout point at the peak of the boiling curve. View Details

The Concentric Tube Heat Exchanger passes hot water through a copper tube inside a GI pipe and runs the cold stream in parallel or counter flow to find LMTD and effectiveness. View Details

The Centrifugal Blower Test Rig compares forward, backward and radial vane impellers in one spiral casing at speeds from 300 to 3000 RPM. View Details

The Curved Member Apparatus measures horizontal and vertical deflection of steel circle, semicircle and quadrant members loaded at the free end. View Details

The CNC Mill Trainer is a three axis CNC milling machine with a 1.5 HP spindle and an 8 station automatic tool changer for programming practice. View Details

The Constant Mesh Gear Box Actual Cut Section shows a gearbox whose gears stay permanently meshed, built from real parts on a square iron pipe frame for teaching. View Details

The Continuously Variable Transmission Actual Cut Section runs a sectioned CVT from a variable-speed DC motor, with an rpm sensor and digital display for readings. View Details
The Car Chassis Rear Wheel Drive is a motorised cut section with a 4 stroke 4 cylinder petrol engine, clutch, gearbox, propeller shaft and rear axle with differential. View Details
The Coil Ignition System of An Automobile sets out an ignition switch, ignition coil, distributor and four plugs on an open board, with terminals for a battery. View Details
The Cooling System of an Automobile model explains engine cooling with actual parts assembled on a metal stand and can be dismantled for demonstration. View Details
The Catalytic Converter model is built from actual parts on an iron base and is used to teach how a catalyst treats CO, HC and NOx in exhaust gas. View Details
The Carburetors Actual Cut Section range offers sectioned carburetors in four versions, including car, scooter and motorcycle types, dissectible for demonstration. View Details
The Conical Friction Clutch Working Model is complete on a base with an operating lever and shows how friction on a cone surface engages a clutch. View Details

The Centrifugal Clutch Working Model shows how spring-controlled flyweights on a hand-cranked input shaft drive a drum pulley on the output shaft. View Details

The Coil Spring Type Single Plate Clutch shows the working of a coil spring clutch with actual parts assembled on a square iron pipe frame. View Details
Resistance Block consisting of One Resistance of 1K and One Potentiometer of 100K. View Details

Two-channel CDMA (DSSS and FHSS) techniques with 16 kbps, 8 kbps and 4 kbps data rates and an 8-bit word length. View Details
Simulated uncompensated system with adjustable damping: peak percent overshoot Mp variable from 20% to 50% and steady-state error variable from 50% to 0.5%. View Details
Control valve (Linear) Type: Pneumatic; Size: 1/2", Input: 3–15 psig, Air to open, Valve positioner fitted. View Details

CPU with fan: Dual Core Processor above 3.0 Ghz. Mother Board with Intel Chipset having Memory (RAM) of 2 GB DDR 3 RAM, with Display Adaptor card. View Details

4 Video & 4 Audio decoder system. 15” Diagonal TFT LCD Display. 4 Digital Video Cameras with 1TB Memory drive. View Details

3 Axis Standalone CNC Controller with spindle and MPG Support. Support the USB flash disk to read the G code. View Details

CNC lathe machine trainer by JLab with a pre-installed hand wheel and a PC-based CNC system connected to the PC by network cable. View Details
Column behaviour and buckling apparatus for structure analysis laboratories. View Details
Test set for 1 A and 5 A current transformers: ratio and phase error on LCD, magnetising curve and knee-point check, with 100 A current injection set. View Details

It is used in scientific industry for various purposes as per the requirements. High grade raw material and machinery is used in making Characteristics & Applications of Basic Thyristor under the vigilant eye of experts. View Details

It is precisely engineered using fine quality raw material and latest machinery at our unit as per the set standards and norms in the industry. View Details

Critical heat flux describes the thermal limit of a phenomenon where a phase change occurs during heating which suddenly decreases the efficiency of heat transfer. View Details

Variable one touch programming of speed and time with LED display panel. View Details

Dual heat shields dissipate heat keeping case cool to touch even at the highest temperature View Details
Flash card game format with beginning and advanced levels, audio feedback and volume control. View Details
Students get hands on practice with money math and other money skills. View Details

Heavy-wall Buchner-type conical flask with side arm for vacuum filtration, borosilicate 3.3 glass, 250 ml and 500 ml sizes, with studded base. View Details

Clear glass capillary tube, 100 mm long with 1.3-1.6 mm diameter, heat and chemical resistant, for melting point and boiling point determination. View Details

Portable digital conductivity meter with remote probe, 1.999 mS and 19.99 mS ranges, LCD display and 9 V battery operation. View Details

Bottle-top chemical dispenser for 2 to 10 ml, with PTFE, FEP, borosilicate glass and PP parts and a flexible discharge tube with safety handle. View Details

Clear borosilicate glass graduated cylinder, model JL313, in 50, 100, 250 and 500 ml sizes; heat and chemical resistant. View Details

Borosilicate glass conical flask, 250 ml, model JL370, with a 24/29 joint neck, 84 mm diameter and 139 mm height; heat and chemical resistant. View Details

Conical flask in clear borosilicate glass, 500 ml, model JL372, 24/29 joint neck, 104 mm wide and 174 mm tall, for larger batches of solution. View Details

Set of 6 chrome-plated brass cork borers, 5 to 12 mm diameter, with T-handles, tapered cutting edges and a cleaning rod for boring corks and stoppers. View Details

Cast iron cork press, hammer-tone painted on a cast iron base, 30 mm diameter, that softens corks by rolling them so they fit flask and bottle necks. View Details

Assorted solid laboratory stoppers in standard sizes for flasks, bottles and test tubes, resistant to acids, alkalis, ammonia and mild heat. View Details

4.5 inch wire-cutting pliers in drop-forged high-carbon steel with PVC cushion grips and a built-in coil spring; for wire, not steel. View Details

Carbon steel cold chisel: flat pattern at least 24 x 18 x 300 mm with paint coating, plus 1 inch round-nose and diamond-point forms. View Details

Glass tube of 4 different shapes and size Mounted vertically above a horizontal communicating tube View Details

For determining the specific heat of matter View Details

Strips of four different metals Fixed on a wooden ring View Details

Plastic covered with red and black color High temperature resistance battery clamp. View Details

Beast Quality. For making connection in electrical circuit and Experiment. View Details

Student Microscope Illumination by plano concave mirror in fork mount. View Details

Perfect for preparing permanent mounts. Size 18x18mm View Details

Perfect for preparing permanent mounts. Size 18x18mm View Details

Perfect for preparing permanent mounts. Size 18x18mm View Details

Perfect for preparing permanent mounts. Size 18x18mm View Details

Flexible plug lead 4mm l=25 cm black -2 Nos. View Details

Clear glass capillary tube, 0.5 mm bore and 56 cm long, heat and chemical resistant, for melting and boiling point determination. View Details

Clear borosilicate glass crystallizing dish, model JL 284/39, 100 mm diameter and 50 mm high, heat and chemical resistant, for growing crystals from solution. View Details

Polypropylene conical flask, 250 ml, model JL 189/27, rigid, translucent and autoclavable, with a screw cap that keeps it leakproof. View Details

Plain silk cloth piece, 30 x 30 cm, model JL 255/39, for rubbing glass rods in static electricity experiments. View Details

Rectangular copper strip electrode with terminal, 15 x 5 cm, model JL 282/02, for Daniell cell and electrolysis work. View Details

Polypropylene conical flask, 250 ml, model JL 311/11, rigid and translucent, with a leakproof screw cap; autoclavable. View Details

Conical flask of polypropylene, 250 ml, model JL 322/14, with a screw cap that keeps the contents contamination free; autoclavable. View Details

Ripple tank base unit Power adaptor Single point dipper View Details

for both additive and subtractive color mixing. View Details

Copper calorimeter, model JL 185/40, with an inner vessel inside an electroplated outer vessel, a Bakelite lid, rubber stopper and metal stirrer. View Details

White non-absorbent cotton, model JL 201/44, for plugging test tubes, flasks and funnel stems in school practical work. View Details

Pear-shaped 250 ml separating funnel in polypropylene, model JL 205/01, with a leakproof screw cap and PTFE-plug stopcock, autoclavable. View Details

White porcelain china dish, 100 mm diameter, round with a spout and chemical resistant, for evaporating solutions to crystals. View Details

250 ml conical flask in rigid, translucent, autoclavable polypropylene with a screw cap that keeps the contents leakproof and free of contamination. View Details
True-RMS clamp meter, model JL127/012, reading AC current to 600 A through a 30 mm jaw, plus AC and DC voltage to 600 V, resistance, capacitance and temperature. View Details
Stainless steel crucible tongs, model JL117/07, with a bow and corrugated jaws for lifting crucibles and lids during heating work. View Details
White porcelain crucible with cylindrical sides, 25 ml capacity and a fitting lid, for strongly heating small amounts of solid. View Details
Tapered cork stopper of natural bark, brown, model JL239/038, for closing test tubes, flasks and bottles in the laboratory. View Details
Monocular compound microscope JL108/02, 150x to 675x, with a fixed square stage, triple nosepiece, Abbe condenser and mirror illumination. View Details
Compact microprocessor table top centrifuge JL113/05 with programmable speed from 500 to 4400 rpm, a 0-99 minute timer and a two-line LCD. View Details
Transparent rectangular polycarbonate chromatographic jar JL115/06, used as the developing tank in chromatography work. View Details
Conical flask, 250 ml, clear borosilicate glass, model JL147/018, graduated; heat and chemical resistant. View Details
Conical flask, 500 ml, clear borosilicate glass, model JL151/019, graduated; heat and chemical resistant. View Details
Single-cavity microscope slides, model JL157/021, rectangular, in clear borosilicate glass; heat and chemical resistant. View Details
Glass coverslips, model JL165/023, 18 x 18 mm, that keep a specimen flat and spread a liquid sample into an even layer on a microscope slide. View Details
Round white porcelain china dish with a spout, 3 inch diameter, model JL287/048, for evaporating solutions in biology and chemistry practicals. View Details
Plain size 0 rubber cork, 13 mm at the top and 9 mm at the bottom, model JL299/049, for closing small tubes and openings in the lab. View Details
Cork borer set of chrome plated brass tubes in several sizes, each with a cutting edge and handle, model JL302/050, with a cleaning rod. View Details
Enzyme reagent in a 100 ml bottle with MSDS that breaks down plant cell walls in school DNA extraction practicals. View Details
Analytical reagent chloroform in a 500 ml bottle with MSDS, used as a solvent for paper and thin-layer chromatography in the biology lab. View Details
Analytical reagent cobalt chloride, 100 g with MSDS; blue when dry and pink when moist, for water test papers and transpiration practicals. View Details
Cobalt chloride test paper, blue when dry and pink when moist, for detecting water and comparing transpiration from the two surfaces of a leaf. View Details
Analytical reagent copper sulphate, 500 g with MSDS, the copper salt used in the biuret protein test and in Fehling solution A. View Details
Prepared microscope slide of collenchyma, the flexible support tissue of young stems, model JL481/159, on clear borosilicate glass in a white box. View Details
Prepared slide of cardiac muscle, the branched striated tissue of the heart wall, model JL438/0165, on clear borosilicate glass in a white box. View Details
Prepared slide of columnar epithelium, the tall-celled lining of the stomach and intestine, model JL447/0170, on clear borosilicate glass. View Details
This compact, lightweight goggle has a flexible transparent plastic frame and a clear polycarbonate lens, and it is worn during work with chemicals. View Details
This chemical bonding chart is a 75 x 100 cm wall chart printed in colour on polyart, fitted with a plastic roller and given a washable, markable surface. View Details
This chemistry chart, model JL553/026, shows the different groups of organic compounds as a flow chart for classroom teaching. View Details
This 25 ml silica crucible, model JL567/033, comes with a lid and is used for heating chemical compounds to high temperatures. View Details
This size 3 brown wooden cork, model JL583/041, closes test tubes, flasks and bottles and can be bored to take a glass tube. View Details
This size 9 brown wooden cork, model JL585/041-A, stoppers flasks, bottles and tubes and can be bored to take a glass tube or thermometer. View Details
This cork borer set of chrome-plated brass tubes in various sizes cuts holes in corks and rubber stoppers and comes with a cleaning rod. View Details
This clay pipe triangle sits on a tripod stand and supports a crucible while it is heated directly by a Bunsen burner or other heat source. View Details
This 200 mm stainless steel crucible tong is worked by hand to pick up hot crucibles and their lids during heating work in the chemistry laboratory. View Details
This is a hard charcoal soldering block, model JL651/074, measuring 4 x 1 in, made by JLab in Ambala for platinum soldering work. View Details
These capillary tubes, model JL671/083, are made of clear borosilicate glass that is heat and chemical resistant, for laboratory use. View Details
This 250 ml conical flask, model JL674/084, is made of graduated borosilicate glass that is heat and chemical resistant. View Details
Calcium Oxide (Powder) Purified is quicklime powder with MSDS, used to make lime water, show slaking and dry ammonia gas in the laboratory. View Details
Calcium Carbide is an analytical reagent with MSDS that reacts with water to release acetylene gas for laboratory alkyne practicals. View Details
Calcium Carbonate is a 500 g analytical reagent pack with MSDS, used to prepare carbon dioxide and to show thermal decomposition to calcium oxide. View Details
Calcium Chloride Fused is a 500 g analytical reagent drying agent with MSDS for desiccators, guard tubes and drying many gases. View Details
Carbon Disulphide is a 500 ml analytical reagent solvent with MSDS, used to dissolve rhombic sulphur and iodine in laboratory practicals. View Details
Carbon Tetrachloride is a 500 ml analytical reagent solvent with MSDS, used in the chlorine water layer test for bromide and iodide. View Details
This 100 g pack of ceric ammonium nitrate is an analytical reagent oxidant that gives a red colour with alcohols in the hydroxyl group test. View Details
This 500 ml bottle of chlorine water is an analytical reagent oxidant used to release bromine and iodine from their salts in the halogen layer test. View Details
This 500 ml bottle of chloroform is an analytical reagent solvent used to dissolve non-polar compounds and to extract them from water. View Details
This 500 g pack of cobalt chloride is an analytical reagent salt that turns from blue to pink with water and is used to make water test papers. View Details
This 500 g pack of cobalt nitrate is an analytical reagent used in the dry test for aluminium, zinc and magnesium salts on a charcoal block. View Details
These copper chips come in a 100 g analytical reagent pack and are used to confirm nitrates and to prepare oxides of nitrogen with nitric acid. View Details
This 500 g pack of copper nitrate is an analytical reagent used to demonstrate the thermal decomposition of nitrates and to test for copper ions. View Details
This 500 g pack of copper sulphate is an analytical reagent used for the water test, copper displacement by iron and the biuret test for proteins. View Details
Borosilicate glass capillary tubes in different bore diameters, model JL274/035, for capillary rise and surface tension practicals. View Details
Copper calorimeter of 3 x 2 in with copper stirrer, in a felt-packed 9.5 x 9.5 cm teak wood box with thermometer holder, model JL282/039. View Details
Double cotton covered (DCC) copper wire, 500 g, for making the connections in physics electricity practicals. View Details
Round convex mirror of optically worked, highly polished glass with ground edges, 50 mm diameter, in 15 cm or 25 cm focal length. View Details
Round concave mirror, 50 mm in diameter, of optically worked and highly polished glass with ground edges, made in 15 cm and 25 cm focal lengths. View Details

Convex lens, 50 mm diameter, 20 cm focal length, ground edges; model JL243 for focal length and image formation practicals. View Details

Concave (diverging) lens, 50 mm diameter, 20 cm focal length, ground edges; model JL241 for focal length and image practicals. View Details
Carbon resistors in different resistance values, model JL437/115, for Ohms law, series and parallel combinations and current limiting in physics practicals. View Details
Capacitor, model JL451/122, rated 250 V with 20% tolerance and a 105 deg C temperature rating, for charging, discharging, timing and smoothing circuits. View Details
Set of two insulated test leads, red and black, each 50 cm long with a banana plug at one end and a 38 mm plated crocodile clip at the other. View Details
Roll of white cotton thread for pendulums, plumb lines and tying or hanging light apparatus in physics practicals. View Details
Constantan resistance wire, 100 g, 55% copper and 45% nickel, with resistivity that stays nearly constant as temperature changes. View Details
Copper(II) sulphate, 500 g analytical reagent with MSDS, for Daniell cells, copper voltameters and Faraday law experiments. View Details
Complete classroom DNA electrophoresis station with 10 x 10 cm gel tank, 300 V power supply and timer, gel visualization system and a kit for 8 groups. View Details
Curvimeter (map odometer), model JLG683/03, with metal tracing wheel, standard and metric map scales on one side and miles and kilometre scales on the other. View Details
Clear borosilicate glass capillary tubes of 1 mm diameter, heat and chemical resistant, for capillary rise and surface tension practicals. View Details
Set of six 8 x 10 in plastic filters in primary and secondary colours, for colour mixing and light filtering lessons. View Details
Constant velocity car, 7 x 4 in, for timing uniform motion and plotting distance-time graphs; comes with a data sheet of suggested activities. View Details
Car and Ramp Lab: 120 cm aluminium track, ball-bearing car, spring and magnetic bumpers, 50 g and 100 g weights, inclinometer, pulley and string. View Details
This set of four connected vessels of different shapes and volumes, at least 12 cm tall, shows that a liquid settles at one level in every vessel. View Details
This silver aluminium calorimeter cylinder has an insulated handle, is rated 4.5/6 V and is used for heat and specific heat experiments in the laboratory. View Details
This plated-steel vernier caliper has a dual scale, a 0-15 cm metric range reading to 0.01 mm, and a thumb movement for sliding the jaw. View Details
Square borosilicate cover glass, 18 x 18 mm and 0.13 mm thick, that holds specimens flat and spreads liquid samples evenly on microscope slides. View Details
This 100 ml Conical Flask of graduated borosilicate glass is used for swirling, mixing and titrating small volumes of liquid. View Details
This 250 ml Conical Flask in graduated borosilicate glass holds a sample and titrant with room to swirl them during a titration. View Details
This 250 ml Erlenmeyer conical flask of graduated borosilicate glass has a size 29 outer standard taper joint and comes with a stopper. View Details
This 450 mm steel deflagrating spoon has a 10 mm cup welded to a long handle held by a cork in a disc, for burning a small solid inside a gas jar. View Details
This Crucible Holder is a compact 9 cm stainless steel tool, operated by hand, for gripping a crucible so it can be steadied or moved. View Details
This Ceramic Evaporating Dish is a white 100 ml ceramic dish, 90 mm across, used to evaporate the solvent from a solution and recover the dissolved solid. View Details
This Ceramic Fire Assay Crucible Melting Pot N3 is an 18 ml lidded porcelain crucible used for heating chemical compounds to high temperatures. View Details
The Combination Spanner Set gives nine chromed drop forged inch spanners, 1/4 to 3/4 in, each with an open jaw and a ring of the same size. View Details
The Combination Plier is a 160 mm chrome vanadium steel plier with insulated handles that grips, bends and cuts wire. View Details
The Curved Jaw Grip Wrench is a 250 mm forged steel hand tool with curved jaws and a rust-protected silver-tone finish. View Details
This Cutting Disk is a 125 mm abrasive disc for metal, in 3 mm and 5 mm thicknesses, that cuts bar, angle, tube and sheet on an angle grinder. View Details
This Copper Pipe is a 15 m roll in 6 mm or 8 mm outside diameter for liquid lines, small refrigeration circuits and RAC trainer pipework. View Details
This Copper Pipe is a 15 m roll in 10 mm or 12 mm outside diameter for split AC suction lines and the main runs of small commercial systems. View Details
This Copper Pipe is a 15 m roll in 14 mm or 16 mm outside diameter for the suction lines of larger air conditioners and cold room pipework. View Details
This Copper Pipe Insulation comes in flexible 1.8 m lengths with a 6, 8, 10 or 12 mm bore, to cut heat gain and condensation on refrigerant pipes. View Details
This Copper Pipe Insulation comes in flexible 1.8 m lengths with a 14 mm or 16 mm bore for the larger suction lines of air conditioners and cold rooms. View Details
This Cover Ending is an 80 x 60 mm PVC end piece that finishes the open end of an air conditioner pipe duct, packed 20 to a box. View Details
This copper Capillary Tube is the fixed expansion device for small refrigeration systems, in 100 ft lengths with 0.036, 0.031 and 0.028 in bores. View Details
Borosilicate glass conical flask, 250 ml, model JL351, autoclavable, for titrations, mixing and warming solutions in teaching and test labs. View Details
Autoclavable borosilicate glass conical flask, 500 ml, model JL355, for larger batches of solutions, reagents and culture media. View Details
Set of six nickel-plated steel cork borers with saw-shaped cutting edges, 3.4 to 8.45 mm outside diameter, with a push rod for clearing them. View Details
Erlenmeyer conical flask, 250 ml, borosilicate glass with uniform wall thickness, a graduated scale and a labelling field; autoclavable. View Details
Cast-iron cork presser on a wooden base that softens corks up to 32 mm in diameter evenly by rolling, without increasing their porosity. View Details
Erlenmeyer conical flask, 500 ml, borosilicate glass with a side arm, uniform walls, a graduated scale and a marking field; autoclavable. View Details
Set of 10 fine-grain natural corks in assorted sizes, 8 to 30 mm (0.3 to 1.2 in) in diameter, for closing tubes, bottles and jars. View Details
Glass capillary tubes, model JL157, heparinised and non-heparinised, marked with a red or blue line and packed in plastic vials with snap-lock caps. View Details
Chemical dispenser, model JL239, 10 ml, that fits directly on the reagent bottle, with a floating piston, safety discharge system and a sealing system without washers. View Details
Conductivity meter, model JL234, with built-in probe, measuring conductivity (2000 uS and 20.00 mS), TDS up to 20,000 ppm and temperature, with automatic compensation. View Details

This Chemistry Kit equips a general chemistry laboratory with bench instruments, two balances, burners, distillation sets, glassware, porcelain and plasticware. View Details

The Conradson apparatus measures the carbon residue left after an oil is evaporated and pyrolysed in nested porcelain and iron crucibles. View Details

The Cloud and Pour Point tester cools petroleum samples in two separately controlled refrigerated compartments to find their cloud and pour points. View Details

The Copper Strip Corrosion Tester holds 4 to 12 petroleum samples in a PID-controlled metal bath up to 150 degrees C for the ASTM D130 copper strip test. View Details

The Change of State Gases Experiment uses two tanks, a compressor and vacuum pump and PID temperature control to study how gas pressure, volume and temperature change. View Details

Complete CBSE physics lab package of 58 SKU-coded items, from battery eliminators and meters to lenses, magnets and models, for up to 30 students. View Details

CBSE chemistry lab package for classes XI and XII: 102 lines of apparatus, borosilicate glassware and chemicals for up to 30 students at once. View Details

CBSE biology lab package for classes XI and XII with anatomical models, three microscopes, prepared slides, specimens and glassware for up to 30 students. View Details

Composite CBSE lab package for Class IX and X science practicals with a maths lab; its physics section has 58 coded lines of apparatus and models. View Details

CBSE composite lab package for Class IX and X: 272 lines of physics, chemistry and biology apparatus, glassware, chemicals, models, slides and specimens. View Details

Life-size anatomical perineal model with pre-cut episiotomies and tears for suture training. View Details

A realistic, life-size anatomical model of the female cervix designed for educational demonstration of common cervical pathologies View Details

Computer controlled CPR manikin with AED & Trauma Simulation View Details

Glass communicating vessel set with four differently shaped limbs on one horizontal tube, mounted on a round plastic stand for liquid pressure lessons. View Details

These standard-size crocodile clips have red and black insulating plastic covers and make quick connections to terminals and wires during instrument testing. View Details

This set of 1 cm Cubes in rubber, wood, opaque plastic, iron and transparent plastic is used to compare mass and density at equal volume. View Details

This set of Capacitors with Gradual Increase of Capacitance has five capacitors on stands, from 0.1 to 10000 uF, with a 24 V working voltage. View Details

Cables with Plug are 50 cm test leads that connect power supplies, meters and components through sockets or binding posts. View Details

Cables with Clips are 50 cm connecting cables with clips that join two components in school circuits and basic circuit tests. View Details

This Circuit Switch is a mechanical knife switch with red and black binding posts that opens and closes a circuit by hand. View Details

This 2 cm Compass carries a freely turning magnetised needle whose red tip points north, for physics experiments and direction finding. View Details

These Communicating Vessels are glass tubes of different shapes joined at the base on a stand, showing that one liquid settles at the same level in every tube. View Details

This Conical Flask (Erlenmeyer) with Stopper is a glass flask with a ground glass stopper, beaded rim and printed graduations, made in sizes from 25 ml to 500 ml. View Details

These Calibrated Plastic Droppers are transparent, chemical-resistant plastic droppers in 0.5 ml, 1 ml and 5 ml capacities for measuring and moving small liquid volumes. View Details

These metal crucible tongs, with a 4 cm jaw opening and scissor action, are used to move crucibles and other hot containers to and from a heat source. View Details

This Chromatography Set lets students separate the dyes in marker inks on filter paper, using the beaker, dowels, clips, pens and pencil it contains. View Details

This Compound Biological Microscope has a 360 degree rotatable monocular head, 4x, 10x and 40x achromatic objectives, 10x and 25x eyepieces and top and bottom LED lights. View Details

These Cover Glasses are thin clear 24 x 24 mm glass squares, packed 150 to a box, for covering specimens mounted on microscope slides. View Details

This magnetic-board mechanics kit contains a disc of moments, a lever, pulleys, dial force gauges, hook weights, springs and an inclined plane in a carry case. View Details

This compact electronic scale weighs up to 1,200 g in 0.1 g steps on a stainless steel pan and is calibrated externally with the 1 kg weight supplied. View Details

This stackable CH1 box holds basic chemistry equipment, including plain and drilled rubber stoppers, tongs, a combustion spoon, a 50 ml cylinder and a digital thermometer. View Details

The CH2 basic equipment set is a stackable 40 x 30 x 17.5 cm storage box holding borosilicate beakers, test tubes, a mortar and indicator paper in a foam insert. View Details

This consumables kit for general chemistry cabinets holds acids, salts, solvents, indicators, metals, test papers, glass rods and a start-up supply of demineralised water. View Details

Acrylic robotic chassis Dual continuous crawler tracks View Details

Design and installation of a composite science lab for physics, chemistry and biology: benches, chemical-resistant tops, sinks, service points and apparatus. View Details

This constant speed car rolls at a steady velocity once switched on and flips over to change direction when it meets a wall. View Details



















































































.jpg)
.jpg)

























































































